Search

Periprosthetic joint infection (PJI) continues to be one of the leading causes of failure following total hip arthroplasty (THA). The objectives of the study were to (1) determine the minimum 2-year infection-free survivorship of 2-stage revision THA, (2) determine the causative organisms for repeat 2-stage revision THA, and (3) characterize the results of failed 2-stage revisions and evaluate patient-reported outcome measures (PROMs). A retrospective chart review was completed for patients who underwent 2-stage revision THA for PJI. Prospective data were collected on each patient, including demographics, causative organisms, complications, and type of reoperation. The PROMs, including Harris Hip Score, 12-item Short-Form Health Survey, and Western Ontario and McMaster Universities Osteoarthritis Index scores were obtained prior to 2-stage revision THA surgery and annually as part of standard clinical and radiographic follow-up. A total of 328 patients who underwent a 2-stage revision THA for a PJI were included in the study (mean age 67 years [range, 28 to 90], mean body mass index of 30.6 [range, 15 to 57]). The overall infection-free survivorship for 2-stage revision THA was 73.8% at a minimum of 2 years (range, 2 to 20). Overall, 194 (59.1%) patients who had successful infection eradication underwent a 2-revision THA only. The most common single organisms infected were Staphylococcus aureus (12.5%) and Staphylococcus epidermidis (11%). Higher reoperation rates were found in cases with methicillin-resistant Staphylococcus aureus and polymicrobial infections. All PROMs showed statistical improvement from preoperatively to the latest follow-up appointment. Two-stage revision THA is associated with a good success rate in the treatment of PJIs at mid-term to long-term follow-up. Polymicrobial and methicillin-resistant Staphylococcus aureus infections are poor prognostic factors, making the eradication of infection more difficult. The management of PJIs continues to be one of the most important orthopaedic challenges to treat. [ABSTRACT FROM AUTHOR]

Modular titanium fluted tapered (TFT) stems have demonstrated excellent clinical success for femoral revision total hip arthroplasty (THA) surgery. This study reports the short-term outcomes of a novel modern monoblock TFT stem used for revision and complex primary THA with a minimum of 2 years of follow-up. We identified 126 patients who received a single monoblock TFT stem: 26 patients for complex THA (failed fracture fixation) and 100 patients for revision THA. The reasons for revision THA included 40 for previous periprosthetic joint infection, 42 for aseptic loosening, 9 for trunnionosis, and 9 for periprosthetic fractures. The Paprosky grading for femoral bone loss at the time of surgery and the measured subsidence of femoral stems at 3-month follow-up were determined. We evaluated the number and indications for reoperations. The mean time from surgery was 3.9 years (range, 2.0 to 6.9). A paired t -test analysis showed significant improvement from preoperative versus postoperative clinical outcome scores (P <.001) for Harris Hip Score (38.76 ± 15.24 versus 83.42 ± 15.38), Western Ontario and McMaster Universities Arthritis Index (45.6 ± 19.0 versus 69.9 ± 21.3), Veterans RAND 12 Item Health Survey Physical component (31.7 ± 8.1 versus 37.8 ± 11.3), and Veterans RAND 12 Item Health Survey Mental component (48.2 ± 12.2 versus 51.6 ± 12.5). The Paprosky grading for femoral bone loss was Grade 1 (3.9%), Grade 2 (35.7%), Grade 3A (47.6%), Grade 3B (11.1%), and Grade 4 (1.6%) cases. There were 18 reoperations (14.7%), with 13 for periprosthetic joint infection (7 treated with implant retention and 6 treated with a 2-stage revision), 4 for instability, and 1 for acetabular aseptic loosening. There were no aseptic failures of the stem. This novel modern monoblock TFT stem provided reliable femoral fixation and has increasingly supplanted the use of modular TFT stems for complex primary and revision surgery in our institution. [ABSTRACT FROM AUTHOR]

Routine patellar resurfacing during primary total knee arthroplasty (TKA) remains controversial. To our knowledge, there are no studies reporting the long-term performance of a cemented biconvex all-polyethylene inlay component implanted at the time of primary TKA. The purpose of this study was to examine the 15-year survivorship and long-term clinical outcomes of this biconvex inlay patella used at our institution. We retrospectively reviewed our prospectively collected institutional database and identified 2,530 patients who underwent cemented TKA with a single prosthetic design (from 1996 to 2007) where the patella was resurfaced using this cemented biconvex inlay patella. The mean age at surgery was 68 years (range, 29 to 93). The mean body mass index was 33.0 (range, 16.4 to 76.3), with 61.9% women. At the time of analysis, the mean time from surgery was 20.4 years (range, 15 to 26). We used Kaplan–Meier analysis to calculate survivorship at 15 years. We analyzed clinical outcomes using 3 patient-reported outcome measures collected prospectively. The 15-year survivorship with revision surgery for all causes as the end point was 97.1% (95% confidence interval 96.1 to 98.1%). The 15-year survivorship with revision surgery for a patella-related complication as the end point was 99.7% (95% confidence interval 99.4 to 1.0). At the final follow-up, patients showed significant improvement in scores for the Knee Society Clinical Rating System (P <.001), Western Ontario and McMaster University Osteoarthritis Index (P <.001), and Veterans Rand 12-Item Health Survey physical component (P <.001). Routine patellar resurfacing using a biconvex inlay patellar component has excellent survivorship and a low rate of complications at 15 years post-TKA. [ABSTRACT FROM AUTHOR]

Bicruciate-stabilized (BCS) total knee arthroplasty (TKA) designs attempt to approximate natural knee mechanics. Multiple surgical techniques, including gap balancing (GB) and measured resection (MR), have been developed to provide optimal implant positioning and soft-tissue balance. The goal of this study was to determine the effect of surgical technique on BCS TKA contact kinematics. Secondary goals included investigating the change of kinematics over time and comparing BCS TKA kinematics to a posterior-stabilized (PS) design. The study included the BCS-GB, BCS-MR, and PS-MR groups. The BCS-GB and BCS-MR groups underwent weight-bearing radiostereometric analysis for multiple knee flexion angles at 3 months and 1 year postoperatively, whereas the PS-MR group was imaged at 1 year postoperatively. The medial and lateral contact kinematics were determined from implant poses. There were no differences in BCS TKA kinematics between the GB and MR techniques. There were differences in the mid-flexion ranges when comparing the 3-month and 1-year kinematics of the BCS design; however, they were less than 1.5 mm. Differences existed between the kinematics of the BCS and PS designs at all flexion angles for the medial condyle (P <.0006) and at 0° of flexion on the lateral condyle (P <.0001). Contact kinematics for a BCS design were similar for both surgical techniques, suggesting both are appropriate for this design. Small, likely clinically insignificant differences were found between 3-month and 1-year kinematics. The BCS TKA kinematics differed from the PS design; however, it is unclear whether these differences improve clinical outcomes. [ABSTRACT FROM AUTHOR]

Subsidence remains a concern when utilizing tapered fluted titanium (TFT) femoral stems and may lead to leg length discrepancy, impingement, instability, and failure to obtain osseointegration. This study aims to compare stem subsidence across 3 modern TFT stems. Our secondary aim was to investigate the influence of bicortical contact or "scratch fit" on subsidence, as well as the role of intraoperative imaging in maximizing bicortical contact and preventing stem subsidence. A retrospective review of 271 hip arthroplasties utilizing modern TFT stems at a single institution was performed. Three stem designs were included in the analysis: 1 monoblock TFT stem (n = 91) and 2 modular TFT stems (n = 90; n = 90). Patient demographics, Paprosky femoral bone loss classification, bicortical contact, utilization of intraoperative imaging, and stem subsidence (comparison of initial postoperative radiograph to the latest follow-up radiograph—minimum 3 months) were recorded. There was no statistically significant difference in overall subsidence (P =.191) or the incidence of subsidence >5 millimeters between stems (P =.126). Subgroup analysis based on femoral bone loss grading showed no difference in subsidence between stems. Increased bicortical contact was associated with reduced subsidence (P =.004). Intraoperative imaging was used in 46.5% (126 of 271) of cases; this was not correlated with bicortical contact (P =.673) or subsidence (P =.521). All 3 modern TFT stems were highly successful and associated with low rates of subsidence, regardless of modular or monoblock design. Surgeons should select the stem that they feel is most clinically appropriate. [ABSTRACT FROM AUTHOR]

Hybrid fixation, utilizing diaphyseal press-fit stems and cement fixation in the tibial and femoral metaphyseal areas, has long been a strategy for revision total knee arthroplasty (rTKA). The purpose of this study was to evaluate the clinical outcomes and survivorships of hybrid fixation using a single rTKA revision system with a minimum of 5 years follow-up. We reviewed our prospectively collected database to identify 281 patients who underwent rTKA using a single revision system with hybrid fixation and press-fit stems between July 2006 and August 2016. We reviewed the clinical outcome scores, including the Knee Society Score, Western Ontario and McMaster Universities Osteoarthritis index, and Veterans RAND 12 Item Health Survey. We also evaluated the 5 and 10-year survivorships and the indications for reoperations. The cohort had a mean age of 70 years (range, 45.2 to 92.0) and a mean body mass index of 33.4 (range, 17.3 to 55.8). The mean time from rTKA surgery was 11.1 years (range, 5.3 to 15.5). Paired t -test analyses showed significant improvements from preoperative versus postoperative clinical outcome scores (P <.001) for Knee Society Score, Western Ontario and McMaster Universities Osteoarthritis, and Veterans RAND 12 Item Health Survey Physical component. Prosthetic joint infections after index rTKA were the most common failure mode with 29 patients requiring reoperations. Rerevision due to aseptic loosening was uncommon (6 patients) with a cumulative survival rate of 95.2% at 5 years and 94.2% at 10 years. The use of this single rTKA system utilizing press fit stems combined with hybrid fixation provided significant improvements in the clinical outcomes and excellent survivorships at 5 and 10 years. [ABSTRACT FROM AUTHOR]

Contact kinematics in total knee arthroplasty (TKA) has been shown to affect tibial component migration. However, previous studies correlating kinematic variables to implant migration were completed with older TKA designs. The goal of this study was to determine if there are associations between contact kinematics and tibial component migration for a cemented, bicruciate stabilized (BCS) TKA system. A total of 54 knees implanted with a BCS TKA system were analyzed using radiostereometric analysis (RSA). Patients underwent RSA exams at 2 weeks, 6 weeks, 3 months, 6 months, 1 year, and 2 years post operation to measure tibial component migration. At 1 year, contact kinematics was evaluated during a quasi-static deep knee bend. Linear regression analyses were performed between kinematic variables and migration values. Significant correlations were found between contact kinematics and tibial component migration. Excursion on the lateral condyle was the most consistent variable correlating with implant migration. Six patients had > 0.2 mm migrations from 1 to 2 years post operation indicating continuously migrating tibial components, and most had atypical contact kinematics. Kinematics was shown to influence tibial component migration. Reduced lateral excursion, suggesting a more constrained lateral condyle, resulted in greater implant migration. The 6 patients who had continuously migrating tibial components had demographic factors that may limit the ability to endure unintended force transmissions caused by abnormal kinematics. These results highlight the importance of restoring knee kinematics with this BCS TKA design to minimize improper force transmissions and resultant increased implant migrations. [ABSTRACT FROM AUTHOR]

Background: The prevalence and outcomes of unexpected positive intraoperative cultures (UPC) in presumed aseptic revision total knee arthroplasty (TKA) are unclear. The purpose of this study was to determine the prevalence of UPC and infection-free implant survival in this patient population. Secondly, we aimed to compare the infection-free implant survival between cohorts based on number of UPCs and antibiotic treatment.Methods: We reviewed our institutional database from 2006 to 2019 for all TKA revisions (n = 1795) to identify all presumed aseptic TKA revisions with intraoperative culture(s). After exclusions, 775 revisions were eligible and those with UPC were included in the Kaplan-Meier analysis to determine infection-free implant survival for the cohorts.Results: The prevalence of UPC was 9.8%. The 2- and 5-year infection-free survival was 97.4% and 95.3%, respectively. The 5-year infection-free survival from the same microorganism as the UPC was 98.7%. Infection-free survival was similar for the 1 versus ≥2 UPC cohorts (P = .416), however was poorer for the cohort treated with antibiotics (P = .021). Only one of 3 subsequent PJI-related implant failures was caused by the same microorganism (polymicrobial) as the UPC. There were no subsequent infections in patients with a single UPC not treated with antibiotics.Conclusions: The prevalence of UPC was 9.8% and the infection-free implant survival is excellent. Infection-free survivorship from PJI caused by the same UPC microorganism is outstanding. Comparisons between cohorts must be interpreted with caution due to study limitations. A single UPC in patents without other signs of infection does not require antibiotic treatment.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Background: Implant migration and altered kinematics have been thought to impact patient-reported outcome measures (PROMs) and postoperative patient satisfaction. In this study comparing satisfied and dissatisfied total knee arthroplasty (TKA) patients, we hypothesized that dissatisfied patients will have greater continuous implant migration and that there will be differences in joint kinematics, objective functional measurements, and PROMs between satisfied and dissatisfied patients.Methods: The Knee Society Score Satisfaction Subsection questions regarding satisfaction with function were used at least 6 months postoperation to split 50 patients into satisfied and dissatisfied groups. Patients underwent radiostereometric analysis to evaluate migration and kinematics. A wearable sensor system obtained objective measurements of patient function during timed up and go tests. PROMs were recorded preoperation and postoperation.Results: No statistically significant differences were found in migration between satisfied and dissatisfied groups. Statistical kinematic differences existed in lateral anteroposterior contact location at 20° and 40° of flexion at 1 year, where the dissatisfied group had more anteriorly located lateral contact. No statistically significant differences were present in objective functional measurements. Satisfied and dissatisfied groups had differing PROMs at 4 timepoints or greater for each questionnaire.Conclusions: No differences were found in tibial component migration or objectively measured function between satisfied and dissatisfied patients. Functionally dissatisfied patients had more anteriorly positioned contact on the lateral condyle in early flexion and reported more pain and unmet expectations. These findings suggest that improving the functional satisfaction of TKA requires restoration of kinematics in early flexion and management of patient's pain and expectations. [ABSTRACT FROM AUTHOR]

Background: The goal of this study is to investigate the migration and inducible displacement of a bicruciate-stabilized (BCS) total knee arthroplasty implanted using gap balancing (GB) or measured resection (MR) surgical techniques. We hypothesized equal migration and displacement between the techniques.Methods: The study is a single-blinded, prospective, randomized controlled trial, with allocation of 71 patients to either GB or MR groups. Fifteen patients were withdrawn, resulting in 31 patients in the GB group and 25 in the MR group. Patients received the JOURNEY II™ BCS implant. Migration and inducible displacement were evaluated using radiostereometric analysis and patient examinations were performed at a 2-week baseline, and at 6 weeks, 3 months, 6 months, 1 year, and 2 years postoperation.Results: No differences (P > .05) existed between GB and MR groups for any measurement of tibial or femoral migration. Both groups had tibial migrations below 0.5 mm from baseline to 6 months, and below 0.2 mm from both 6 months to 1 year and 1-2 years postoperation. No differences (P > .05) were found between GB and MR groups for inducible displacement.Conclusion: No differences were found in implant migration or inducible displacement between GB and MR groups. The BCS implant can be expected to have migration risks on par with industry standards and both surgical techniques are safe and effective options for implantation of this implant design. [ABSTRACT FROM AUTHOR]

The objective of this study was to identify the rate and risk factors for revision total knee arthroplasty (TKA) within the first 5 years postoperative. Our secondary objective was to identify the rate of additional surgical procedures and death. We conducted a retrospective cohort study among patients in Ontario, Canada who underwent an elective, primary TKA between April 1, 2007, and March 31, 2014, for osteoarthritis. We excluded patients under 40 years and who had undergone a TKA within the previous 15 years. Our final study cohort included 94,193 patients. We reported the proportion of the study cohort who experienced revision surgery within 2 and 5 years of the primary TKA; secondary surgery within 5 years. We conducted Cochran-Armitage tests for trends to assess changes in the proportion of patients who experienced each of the study outcomes, and multivariable logistic regressions to evaluate predictors of a revision TKA. There were 3,112 (3.3%) patients who had a revision within 5 years, and 1,866 (2.0%) within 2 years of their primary TKA. 3,316 (3.5%) had a secondary surgery (0.6% patellar resurfacing; 1.6% manipulation; 1.3% synovectomy; 0.5% washout; 0.9% debridement). Lower age, men, lower income, higher comorbidity score, depression, previous arthroscopy, lower surgeon volume, and general anesthesia were all significant positive predictors of revision. In our study cohort, 2.0% of patients had a revision TKA within 2 years, and 3.3% within 5 years of their primary TKA. Preoperative identification of risk factors may reduce the future prevalence of revision TKAs. [ABSTRACT FROM AUTHOR]

Background: Several treatment modalities exist for the treatment of perioperative anemia. We determined the effect of oral iron supplementation on preoperative anemia, and the use of blood-conserving interventions before total hip arthroplasty (THA) and total knee arthroplasty (TKA).Methods: A total of 3435 total joint arthroplasties (1461 THAs and 1974 TKAs) were analyzed during 2 phases of a blood conservation program. The first phase used erythropoietin alfa (EPO) or intravenous (IV) iron for patients at risk for perioperative anemia. The second phase included these interventions, as well as preoperative iron supplementation. The effect on preoperative hemoglobin (Hb) and serum ferritin, as well as EPO and IV iron utilization, was determined.Results: Oral iron therapy increased preoperative Hb level by 6 g/L (P < .001) and 7 g/L (P < .001) in the hip and knee cohorts, respectively. Serum ferritin level rose by 80 μg/L (P < .001) and 52 μg/L (P < .001) in the hip and knee cohorts, respectively. The number of patients with an Hb level <130 g/L was significantly reduced (P < .001 for both cohorts), as were patients with serum ferritin levels <35 μg/L (P = .002 for hip and P < .001 for knee cohorts). Utilization of EPO reduced from 16% to 6% (P < .001) and 18% to 6% (P < .001) in the hip and knee cohorts, respectively. Utilization of IV iron reduced from 4% to 2% (P = .05) and 5% to 2% (P < .001) in the hip and knee cohorts, respectively.Conclusion: Oral iron therapy reduced the burden of perioperative anemia and reduced utilization of other blood-conserving therapies before THA and TKA. Future research should delineate the cost-effectiveness of oral iron therapy. [ABSTRACT FROM AUTHOR]

Background: Coronal plane alignment is one of the contributing factors to polyethylene wear in total knee arthroplasty.Methods: Based on 95 retrieved polyethylene inserts, wear and damage patterns were analyzed in relationship to the overall mechanical alignment and to the position of the tibial component.Results: A progression of wear was observed with progressively mechanical varus alignment. However, there was significantly more damage in the lateral compartment in the mild and moderate varus group compared to the valgus group. No difference in damage was seen between all groups for tibial component positioning in valgus or varus.Conclusion: Progressive wear was observed with progressively varus alignment with more damage at the lateral side. This observation is unique and might be explained by lateral condylar lift-off inducing impact and shear loading in the varus group. [ABSTRACT FROM AUTHOR]

Background: Wear in posterior-stabilized (PS) polyethylene tibial inserts depends on component position, limb alignment, and ligament balancing. Valgus-varus constrained (VVC) inserts are likely to be affected similarly. We aimed to compare wear characteristics of VVC and PS inserts and identify associated factors.Methods: This was a retrieval analysis (macroscopic and radiographic) of all 18 VVC liners collected from patients who underwent revision surgery from 1999 to 2011. These patients were matched to another group with PS inserts who underwent revision in the same time period.Results: There was significantly more damage in the posts of the VVC group (13.0 ± 5.0, compared to 4.7 ± 1.9 in the PS group; P < .001). Within the VVC group, the total damage score and cold flow damage were significantly higher with excessive joint line changes (≥5 mm; P = .01). The excessive joint line elevation was associated with rotational wear pattern of the post (P = .004). Damage scores were increased with femoral component malposition (P = .04), anterior tibial slope (P = .04), and tibial component malposition (P = .04).Conclusion: Joint line elevation, femoral and tibial component malposition, and anterior tibial slope resulted in significantly more wear in the VVC inserts. Joint line elevation of >5 mm resulted in wear of the medial and lateral aspects of the post, femoral valgus resulted in cold flow wear of the anterior post, and tibial valgus and anterior slope resulted in wear of lateral aspect of the post. [ABSTRACT FROM AUTHOR]

Current discussion exists whether to position a total knee arthroplasty (TKA) in slight undercorrection in varus osteoarthritis. The goal of this study was to analyse the effect of wear and lateral lift-off in primary TKA on coronal plane alignment and the implication to future constrained revision TKA. Seventy-six retrieved tibial inserts were analysed for the ratio of wear (RW), lateral lift-off and implications for future constrained revision surgery according to the coronal plane alignment. The RW significantly affects the coronal plane alignment in TKA. Progressive wear and lateral lift-off were seen with progressive varus alignment. However, there was no difference in constrained revision between mild varus and moderate varus aligned TKAs. [ABSTRACT FROM AUTHOR]

Background: In March 2020, an emergency was declared in the province of Ontario owing to the COVID-19 pandemic. From March 19 to May 26, all elective total hip arthroplasty (THA) and total knee arthroplasty (TKA) procedures were deferred. The purpose of this study was to review the unit sales data of THA and TKA procedures in Ontario over this time period to identify any trends in surgical activity.Methods: Unit sales data for all THA and TKA procedures performed in Ontario between January 2019 and December 2020 were reviewed. All orthopedic companies contributed to the data set. Femoral stems were considered an indicator of THA procedures, while primary femurs were considered an indicator of TKA procedures. Data were analyzed to determine trends in THA and TKA procedures during the deferral period and the relative change in THA and TKA activity following resumption.Results: There was a 53% reduction in THA activity between March and May of 2020 when compared to the same interval in 2019. From June to September of 2019, THA sales activity was 87.3% that of TKA. From June to September of 2020, THA sales activity was 122.8% that of TKA.Conclusion: Provincial directives aimed at controlling the outbreak of COVID-19 contributed to a substantial reduction in THA and TKA activity in 2020. Compared to 2019, there was a disproportionate increase in THA compared to TKA activity in 2020 following resumption of surgical services. These data have implications in recovery planning for the surgical backlog of THA in Ontario. [ABSTRACT FROM AUTHOR]

Abstract: The purpose of this study was to determine agreement between responses on electronic and paper versions of the WOMAC and SF-12(v2) questionnaires following total hip and total knee arthroplasty. Patients completed both electronic and paper questionnaires with a one week interval in-between. The order in which they completed the two versions was randomly assigned. A total of 53 patients completed the study, with a mean age of 69years (range 50–90years). The intraclass correlation coefficients (ICC) were high, indicating excellent agreement (WOMAC ICC=0.96, 95% CI 0.94–0.98), SF-12 (PCS) ICC=0.95, 95% CI 0.92–0.97; SF-12 (MCS) ICC=0.92, 95%CI 0.86–0.95). Online data collection may be substituted for the traditional paper method with no significant effect on the criterion validity of the questionnaires. [Copyright &y& Elsevier]

Abstract: This was a retrieval analysis of 83 PS inserts to assess the effect of limb alignment, implant position and joint line position on the pattern of wear in posterior stabilized (PS) tibial inserts. The total damage score was significantly higher in knees with postoperative varus alignment more than 3° (P = 0.03). The total damage score to the post was significantly more in knees with joint line elevation more than 5 mm (9.7 ± 3.9, compared to 6.5 ± 3.7 in knees with less joint line elevation) (P = 0.05). Limb malalignment and joint line elevation resulted in more damage in PS inserts. An external rotation subluxation damage pattern was found in joint line elevation. [Copyright &y& Elsevier]

Abstract: The treatment goals of Vancouver type B2 periprosthetic femoral fractures in elderly patients with a limited life expectancy are early weight bearing without compromising the fracture healing. Thirty-one patients with a mean age of 82 years were treated with a long cemented stem with additional allograft or plate fixation, followed by immediate full weight bearing. Seven major complications occurred within the first 3 months postoperatively. Forty-three percent of patients had died within the first year with their implant in place. Sixteen patients had survived more than 1 year. None of the implants had to be revised at a mean follow-up of 46 months. The results of this series suggest that this technique can provide acceptable results and offers the advantages of reduced cost and early weight bearing. [Copyright &y& Elsevier]

Abstract: Geometric wear analysis techniques require unworn geometries to serve as a reference in wear measurement. A method to create a reference geometrical model is described for retrieval studies when the actual unworn geometry is unavailable. Never-implanted tibial inserts were scanned with micro–computed tomography. Two, 3, or 6 insert surfaces were coaligned and averaged to create reference geometries. Individual inserts were compared with each other (manufacturing variability) and with the reference geometries (reference variability). The 3-dimensional deviations between the surfaces were recorded. The reference variability was reduced to 8.3 ± 39 μm, vs manufacturing variability of 15 ± 59 μm. Deviations were smallest on the articular surfaces where most wear occurs and were significantly less than the reported insert wear rate of 20 μm/y. [Copyright &y& Elsevier]

Abstract: There is currently considerable interest in the use of highly cross-linked polyethylene (XLPE) acetabular liners for total hip arthroplasty (THA). In literature, only a single retrieval analysis of one type of XLPE liner implanted for greater than four years exists. The purpose of the present report is to quantify surface deviations in two XLPE liners implanted during revision THA and retrieved between four to five years after implantation. The two XLPE acetabular liners (Reflection, Smith and Nephew Inc., Memphis, TN) were retrieved from patients undergoing their second revision surgery, at 4.90 and 4.07 years. The retrieved liners and a new, non-implanted, unworn liner of the same size were scanned using micro-computed tomography (micro-CT). Articular surface deviation maps were created by comparing the retrievals to the unworn liner, based on the liner geometry obtained from micro-CT. The linear penetration rates were found to be 0.018 and 0.008 mm/year. Localized scratches and pits with deviations greater than 0.205 mm were also found on the articular surfaces of both liners. The XLPE liners retrieved from the two cases demonstrated low linear penetration rates. Regions with greater focal deviations were also apparent, likely due to third-body wear. The results are consistent with previously published clinical follow-ups of other XLPE liners. [Copyright &y& Elsevier]

Abstract: Micro-computed tomography (micro-CT) has previously been validated for measuring wear volume in polyethylene acetabular liners. The creation of 3-dimensional (3D) articular and backside surface deviation maps using micro-CT is described. An acetabular liner was retrieved after 16.7 years of implantation and scanned with micro-CT along with a new, never-implanted liner of the same size and type. The liner surface geometries were reconstructed and co-aligned. A 3D comparison and cross-sectional analysis was performed. Maximum 3D deviation of the articular surface was −2.48 ± 0.02 mm, with maximum backside deviation of 0.46 ± 0.02 mm. Micro-CT can measure surface deviation and therefore calculate the volume of wear plus creep of retrieved acetabular liners, and may be applicable for wear simulator studies and analyzing other polyethylene components including tibial inserts. [Copyright &y& Elsevier]

Abstract: Previous literature suggested highly cross-linked acetabular liners demonstrated notching patterns that may be a point of crack origin and rim failure. We examined (1) whether notching patterns and rim cracks existed and demonstrated similar morphological properties in retrieved highly cross-linked and non–cross-linked liners and (2) whether the dimensions of these notches correlated with their duration of implantation. We retrieved a series of 14 identical liners out to an average of 2.03 years. Liners were microscopically examined and then scanned using microcomputed tomography. All liners demonstrated identical notching patterns. Microcomputed tomographic scans demonstrated no signs of crack initiation or rim failure but were able to accurately quantify the notch dimensions. The notching patterns were likely caused by liner-cup micromotion and are better characterized as creep deformation because they did not progress markedly over longer durations of implantation. [Copyright &y& Elsevier]

Abstract: Three cases of a dislocated polyethylene insert in a fixed-bearing total knee arthroplasty are presented. This brief report demonstrates the presentation of this rare mode of failure and highlights the unique complications associated with its treatment. [ABSTRACT FROM AUTHOR]