Search

As modern trends demand efficient methods to massively and promptly exploit clean energy, there is an urgent need of solutions that can help the ambition of accelerating the development and integration of larger scale energy systems with the capacity to extract, store, and utilize huge amounts of renewable energy sources. In view of this, the rated power output of the wind generation technology is expected to significantly increase in the near future to enable multi-gigawatt roll outs, e.g. the European plans for Offshore infrastructure development in the North-Sea. Besides, gigantic energy systems shall transmit the power to onshore interconnected systems via HVDC transmission. This paper introduces an EMT model of a 20 MW wind generation system with the conventional back-to-back converter replaced by a combination of an AC to DC converter and a DC to DC converter. While the need of such systems is acknowledged in the literature, the design and performance analysis of high power implementation of such systems have not been addressed yet. The proposed system operates at a voltage level of 100 kV, which can directly transfer power through HVDC interconnection. The designed control aspects are outlined and the resulting dynamic response obtained from realtime digital simulation (RTDS) are discussed. The presented wind generator concept can help in reducing the size of a planned energy system by requiring lesser system components. Also, the system efficiency can be enhanced by decreasing the number of power conversion stages.

The Nordic Power System is undergoing significant transformation and development in the coming years. A driving factor for this is the increased dependency on renewable energy sources and high voltage direct current transmission (HVDC). Various stability challenges due to the dynamics of reactive power - voltage (Q-V) balancing and active power - frequency (P-f) balancing seep into the system with such rise of non-synchronous generation (NSG). This paper investigates the projected impact of NSGs on the P-f dynamic performance of Nordic power system in 2030. As NSGs are systems with low inertia, power discrepancies lead to larger oscillations, higher Rate of Change of Frequency (RoCoF) and bigger maximum frequency deviation (MFD) values. To address these issues, Emulated Inertia (EI) control for wind turbines and Synthetic Inertia (SI) control for VSC-HVDC links are proposed in this paper. The simulation is carried out using DIgSILENT PowerFactory 2022 SP1 simulation software. The results obtained confirm the Effectiveness of the proposed EI and SI methods to enhance frequency response and mitigate deviations.

Algunas medidas antropométricas muestran mayor capacidad que otras para discriminar la presencia de factores de riesgo cardiovascular. Este trabajo estima la magnitud de la asociación de diversos indicadores antropométricos de obesidad con hipertensión, dislipemia y prediabetes (glucemia basal o glucohemoglobina alteradas).

This article introduces a Hybrid Intervention Scheme Based Optimization (HIBO) algorithm solving an Optimal Reactive Power Management (ORPM) problem in real-time using a Mixed Integer Linear Programming (MILP) solver. The ORPM problem presented here contains a linear objective function containing four objectives separated using a set of static penalty factors for each area. The non-linear optimization problem has been assumed linear by localizing the search for solution, this is done by introducing a penalty on the change from the original state or the base case scenario. Thereby, optimizing the non-linear ORPM in linear steps makes it a fast solver for small changes in power system state. A contingency analysis (for N-1 voltage violations) is included for ensuring the safety and reliability of the power system. The results are used to update the ORPM problem or stop if the system is secure. The optimization variables used to represent transformer taps and shunt device switches are handled as discrete integers and remaining variables as continuous real numbers. The intervention scheme, objectives and constraints used in the HIBO have been derived through surveys conducted at a transmission system control center and are supported using literature. Validation of the HIBO algorithm was performed on the Dutch transmission network model after dividing it into four regional areas. Convergence characteristics of the HIBO algorithm are compared using results. From the results, it is concluded that the HIBO algorithm is a competitive optimization solver, suitable for deployment in the secondary voltage control scheme within system operations domain for transmission system operators.

Caracterizar los pacientes con diabetes que iniciaron terapia con bomba de insulina y monitorización continua de glucosa en tiempo real (CSII-rtCGM) en un centro especializado de Medellín, Colombia.

We use interferometric synthetic aperture radar (InSAR) and local seismic data to investigate the cause of earthquake sequences near Sabancaya volcano in southern Peru from 2002 to 2014, with a particular focus on events leading up to the August 2014 phreatic eruption. InSAR‐observed deformation associated with earthquake swarms in late 2002, February 2013, and July 2013 is modeled by fault slip, with no need for magmatic sources to explain the deformation. The majority of the seismicity is an expression of the regional tectonic system, which is characterized by E‐W trending normal faults, but a link to the magmatic system is possible. The Mw5.9 earthquake on 17 July 2013 occurred on a previously unmapped normal fault that continued to deform in the months following the earthquake. An increase in long period and hybrid seismicity and changes in fumarolic emissions in 2013–2014 culminating in the August 2014 eruption indicates the involvement of both tectonic and magmatic systems. Models of InSAR deformation at Sabancaya show tectonic activityMost earthquakes are tectonic, but some may be related to the magmatic systemSeismicity increased in June 2014 and culminated in phreatic eruption

This paper describes a two-semester course that constitutes a case study of how to develop an undergraduate course on research methods within the context of a business administration program in a medium sized city in Mexico. Students were organised into 19 teams of up to three students, and were asked to develop an industry analysis of an economic sector of the city, as a precursor to expanding an existing business or creating a new one. This was a prototype experience, and because of its success, this research project approach was proposed as a standard activity within a competency-based entrepreneurship curriculum.

This article reviews the art exhibition "Le Legs: Symposium International d'art in Situ" featuring forests in art.