Search

Flexible pressure sensors have attracted increasing research interest because of their potential applications for wearable sensing devices. Herein, a highly sensitive flexible pressure sensor is exhibited based on the elastomeric electrodes and a microarray architecture. Polydimethylsiloxane (PDMS) substrate, coated with silver nanowires (AgNWs), is used as the top electrode, while polyvinylidene fluoride (PVDF) as the dielectric layer. Several transfer processes are applied on seeking facile strategy for the preparation of the bottom electrode via embedding AgNWs into the PDMS film of microarray structure. The flexible pressure sensor integrates the top electrode, dielectric layer, and microarray electrode in a sandwich structure. It is demonstrated that such sensors possess the superiorities of high sensitivity (2.94 kPa–1), low detection limit (<3 Pa), short response time (<50 ms), excellent flexibility, and long-term cycle stability. This simple process for preparing such sensors can also be easily scaled up to construct pressure sensor arrays for detecting the intensity and distribution of the loaded pressure. In addition, this flexible pressure sensor exhibits good performance even in a noncontact way, such as detecting voice vibrations and air flow. Due to its superior performance, this designed flexible pressure sensor demonstrates promising potential in the application of electronic skins, as well as wearable healthcare monitors.

The polar solvent dimethylformamide (DMF) was used to treat the emissive layer (EML) of polymer light-emitting diodes (PLEDs). The formation of a dipole layer at the EML/cathode interface after DMF treatment was proven, which led to a reduction of the electron-injection barrier. The dipole layer was formed mainly because of the intrinsic polarity of DMF. By control of the residue of DMF on the EML, a maximum enhancement of the peak luminous efficiency from 5.33 ± 0.57 to 12.05 ± 1.2 cd/A was achieved. This study suggests that solvent treatment is a simple and efficient approach to realizing highly efficient PLEDs with a high-work-function metal cathode.

In this study, a flexible asymmetrical all-solid-state supercapacitor with high electrochemical performance was fabricated with Ni/MnO2filter paper (FP) as the positive electrode and Ni/active carbon (AC)filter paper as negative electrode, separated with poly(vinyl alcohol) (PVA)–Na2SO4electrolyte. A simple procedure, such as electroless plating, was introduced to prepare the Ni/MnO2–FP electrode on the conventional laboratory FP, combined with the subsequent step of electrodeposition. Electrochemical results show that the as-prepared electrodes display outstanding areal specific capacitance (1900 mF/cm2at 5 mV/s) and excellent cycling performance (85.1% retention after 1000 cycles at 20 mA/cm2). Such a flexible supercapacitor assembled asymmetrically in the solid state exhibits a large volume energy density (0.78 mWh/cm3) and superior flexibility under different bending conditions. It has been demonstrated that the supercapacitors could be used as a power source to drive a 3 V light-emitting diode indicator. This study may provide an available method for designing and fabricating flexible supercapacitors with high performance in the application of wearable and portable electronics based on easily available materials.

Novel alternating 2,7-fluorene‐co‐3,9‐carbazole copolymer(3,9‐PFCz) was synthesized by Suzuki polycondensation between 3‐bromo‐9‐(2‐iodo‐9,9‐dioctyl‐9H‐fluoren‐7‐yl)‐9H‐carbazole and 2,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9,9‐dioctylfluorene. Cyclic voltammetry studies showed a higher HOMO level (−5.23 eV) than the polyfluorene homopolymer(PFO). The glass transition temperature of the copolymer (110 °C) was much higher than that of the PFO (67 °C). After the copolymer had been annealed at 200 °C for 2 h, the PL spectra showed almost no change and no aggregation‐ or oxidation‐related undesirable long‐wavelength emission has been observed. The light‐emitting diode in configuration of ITO/PEDOT/EML/CsF/Al showed a maximum external quantum efficiency of 1.54% with a luminance of 435 cd · m−2 and the maximum brightness of 2 630 cd · m−2 with CIE coordinate (0.17, 0.14) was achieved at 8.4 V. The device prepared in configuration of ITO/PEDOT/PVK/polymer/Ba/Al exhibits an efficient, stable blue emission; it has a turn‐on voltage of 6 V and maximum external quantum efficiency of 1.1%. The EL emission remains stable at high current density and after thermal treatment at 150 °C for 30 min. Extremely color‐stable blue emission from alternating poly[(2,7‐fluorene)‐co‐(3,9‐carbazole)] copolymer makes it a promising candidate for flat‐panel display applications.

A series of novel copolymers based on a poly(p‐phenylenevinylene) (PPV) derivative with different content of narrow band‐gap unit 2,1,3‐benzoselenadiazolevinylene (BSeV) was prepared via Stille coupling reaction. The copolymers emit light from deep red to near‐infrared (NIR) depending on BSeV content in the copolymers. The electroluminescence (EL) emission peaked at 752 nm for the copolymer with the content of 30 mol % BSeV is among the longest reported so far for the PPV polymers. The best device performance is observed for the copolymer with 1 mol % BSeV content with external quantum efficiency (QEext) of 0.26% and CIE coordinate 0.65, 0.34 (x,y). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4321–4327, 2006

Summary: A series of novel poly(fluoreneethynylene) (PFE) copolymers containing a molar ratio less than or equal to 50% of narrow-band-gap (NBG) comonomers, 4,7-dithienyl-2,1,3‐benzothiadiazole (DBT), and 2,1,3‐benzothiadiazole (BT), is prepared by the Pd‐Cu‐catalyzed coupling reaction. The copolymers are soluble in common organic solvents. All the polymers are fluorescent in solution and in solid state. Chemical and photophysical properties of these copolymers were thoroughly studied. Devices based on the copolymers emit saturated red light, and the emission slightly red‐shifted gradually with increasing NBG comonomer content. The maximal external quantum efficiency of the polymer light‐emitting diodes (PLED) reaches 0.41% with the emission maximum at 638 nm.Synthesis of PFE by Pd-Cu-catalyzed coupling reaction.