Search

Motor functional improvement represents a paramount treatment objective in the post-spinal cord injury (SCI) recovery process. However, neuronal cell death and axonal degeneration following SCI disrupt neural signaling, impeding the motor functional recovery. In this study, we developed a multifunctional decellularized spinal cord-derived extracellular matrix (dSECM), crosslinked with glial cell-derived neurotrophic factor (GDNF), to promote differentiation of stem cells into neural-like cells and facilitate axonogenesis and remyelination. After decellularization, the immunogenic cellular components were effectively removed in dSECM, while the crucial protein components were retained which supports stem cells proliferation and differentiation. Furthermore, sustained release of GDNF from the dSECM facilitated axonogenesis and remyelination by activating the PI3K/Akt and MEK/Erk pathways. Our findings demonstrate that the dSECM-GDNF platform promotes neurogenesis, axonogenesis, and remyelination to enhance neural signaling, thereby yielding promising therapeutic effects for motor functional improvement after SCI. The dSECM promotes the proliferation and differentiation of MSCs or NSCs by retaining proteins associated with positive regulation of neurogenesis and neuronal differentiation, while eliminating proteins related to negative regulation of neurogenesis. After crosslinking, GDNF can be gradually released from the platform, thereby promoting neural differentiation, axonogenesis, and remyelination to enhance neural signaling through activation of the PI3K/Akt and MEK/Erk pathways. In vivo experiments demonstrated that dSECM-GDNF/MSC@GelMA hydrogel exhibited the ability to facilitate neuronal regeneration at 4 weeks post-surgery, while promoting axonogenesis and remyelination at 8 weeks post-surgery, ultimately leading to enhanced motor functional recovery. This study elucidates the ability of neural regeneration strategy to promote motor functional recovery and provides a promising approach for designing multifunctional tissue for SCI treatment. [Display omitted] [ABSTRACT FROM AUTHOR]

Background: The ideal conduit for repair of the right ventricular outflow tract (RVOT) during the Ross procedure remains unclear and has yet to be fully elucidated. We perform a pairwise meta-analysis to compare the short-term and long-term outcomes of decellularized versus cryopreserved pulmonary allografts for RVOT reconstruction during the Ross procedure. Main body: After a comprehensive literature search, studies comparing decellularized and cryopreserved allografts for patients undergoing RVOT reconstruction during the Ross procedure were pooled to perform a pairwise meta-analysis using the random-effects model. Primary outcomes were early mortality and follow-up allograft dysfunction. Secondary outcomes were reintervention rates and follow-up endocarditis. A total of 4 studies including 1687 patients undergoing RVOT reconstruction during the Ross procedure were included. A total of 812 patients received a decellularized pulmonary allograft, while 875 received a cryopreserved pulmonary allograft. Compared to cryopreserved allografts, the decellularized group showed similar rates of early mortality (odds ratio, 0.55, 95% confidence interval, 0.21–1.41, P = 0.22). At a mean follow-up period of 5.89 years, no significant difference was observed between the two groups for follow-up allograft dysfunction (hazard ratio, 0.65, 95% confidence interval, 0.20–2.14, P = 0.48). Similarly, no difference was seen in reintervention rates (hazard ratio, 0.54, 95% confidence interval, 0.09–3.12, P = 0.49) nor endocarditis (hazard ratio, 0.30, 95% confidence interval, 0.07–1.35, P = 0.12) at a mean follow-up of 4.85 and 5.75 years, respectively. Conclusions: Decellularized and cryopreserved pulmonary allografts are associated with similar postoperative outcomes for RVOT reconstruction during the Ross procedure. Larger propensity-matched and randomized control trials are necessary to elucidate the efficacy of decellularized allografts compared to cryopreserved allografts in the setting of the Ross. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Three-dimensional (3D) printing of decellularized extracellular matrix (dECM) hydrogels is a promising technique for regenerative engineering. 3D-printing enables the reproducible and precise patterning of multiple cells and biomaterials in 3D, while dECM has high organ-specific bioactivity. However, dECM hydrogels often display poor printability on their own and necessitate additives or support materials to enable true 3D structures. In this study, we used a sacrificial material, 3D-printed Pluronic F-127, to serve as a platform into which dECM hydrogel can be incorporated to create specifically designed structures made entirely up of dECM. The effects of 3D dECM are studied in the context of engineering the intrahepatic biliary tree, an often-understudied topic in liver tissue engineering. Encapsulating biliary epithelial cells (cholangiocytes) within liver dECM has been shown to lead to the formation of complex biliary trees in vitro. By varying several aspects of the dECM structures' geometry, such as width and angle, we show that we can guide the directional formation of biliary trees. This is confirmed by computational 3D image analysis of duct alignment. This system also enables fabrication of a true multi-layer dECM structure and the formation of 3D biliary trees into which other cell types can be seeded. For example, we show that hepatocyte spheroids can be easily incorporated within this system, and that the seeding sequence influences the resulting structures after seven days in culture. Statement of Significance The field of liver tissue engineering has progressed significantly within the past several years, however engineering the intrahepatic biliary tree has remained a significant challenge. In this study, we utilize the inherent bioactivity of decellularized extracellular matrix (dECM) hydrogels and 3D-printing of a sacrificial biomaterial to create spatially defined, 3D biliary trees. The creation of patterned, 3D dECM hydrogels in the past has only been possible with additives to the gel that may stifle its bioactivity, or with rigid and permanent support structures that may present issues upon implantation. Additionally, the biological effect of 3D spatially patterned liver dECM has not been demonstrated independent of the effects of dECM bioactivity alone. This study demonstrates that sacrificial materials can be used to create pure, multi-layer dECM structures, and that strut width and angle can be changed to influence the formation and alignment of biliary trees encapsulated within. Furthermore, this strategy allows co-culture of other cells such as hepatocytes. We demonstrate that not only does this system show promise for tissue engineering the intrahepatic biliary tree, but it also aids in the study of duct formation and cell-cell interactions. [ABSTRACT FROM AUTHOR]

Muscle injury and defect affect people's quality of life, and effective treatment is lacking. Herein, we generated a scaffold to obtain decellularized porcine Achilles tendon myotendinous junction (D-MTJ) extracellular matrix (ECM) with well-preserved native biphasic hierarchical structure, biological composition, and excellent mechanical properties for muscle regeneration. The combined use of potassium chloride, potassium iodide, Triton-X 100, and sodium-dodecyl sulfate (SDS) can completely remove the main immunogenicity, while maintaining the major biological components and microstructure. The specific biomechanics of D-MTJ is comparable to the native muscle-tendon physiological conditions. Additionally, the D-MTJ ECM scaffold induced minimal immunological reaction (histology analysis) through rat subcutaneous implantation. Moreover, in vitro , muscle satellite cells adhered, proliferated, and infiltrated into the D-MTJ scaffold, and myofiber-like cell differentiation was observed as shown by increased expression of myogenesis-related genes during culture. In vivo, newly formed myofibers were observed in a muscle defect model with D-MTJ orthotopic transplantation, while the control group presented mostly with fibrous tissue deposition. Additionally, the number of Myod and MyHC-positive cells in the ECM scaffold group was higher at day 30. We preliminary explored the mechanisms underlying D-MTJ-mediated muscle regeneration, which may be attributed to its specific biphasic hierarchical structure, bio-components, and attractiveness for myogenesis cells. In conclusion, our findings suggest the D-MTJ ECM scaffold prepared in this study is a promising choice for muscle regeneration. Statement of Significance This study is the first to use decellularization technology obtaining the specifically decellularized myotendinous junction (D-MTJ) with well-preserved biphasic hierarchical structure and constituents, excellent mechanical properties and good biocompatibility. The D-MTJ was further proved to be efficient for muscle regeneration in vitro and in vivo , and the underlying mechanisms may be attributed to its specifically structure and constituents, improved myogenesis and good preservation of repair-related factors. Our study may provide basis for the decellularization of other biphasic hierarchical tissues and a platform for further studies on muscle fiber and tendon integrations in vitro . [ABSTRACT FROM AUTHOR]

Introduction Xenogeneic extracellular matrix (ECM) hydrogels have shown promise in remediating cardiac ischemia damage in animal models, yet analogous human ECM hydrogels have not been well development. An original human placenta-derived hydrogel (hpECM) preparation was thus generated for assessment in cardiomyocyte cell culture and therapeutic cardiac injection applications. Methods and results Hybrid orbitrap-quadrupole mass spectrometry and ELISAs showed hpECM to be rich in collagens, basement membrane proteins, and regenerative growth factors (e.g. VEGF-B, HGF). Human induced pluripotent stem cell (iPSC)-derived cardiomyocytes synchronized and electrically coupled on hpECM faster than on conventional cell culture environments, as validated by intracellular calcium measurements. In vivo , injections using biotin-labeled hpECM confirmed its spatially discrete localization to the myocardium proximal to the injection site. hpECM was injected into rat myocardium following an acute myocardium infarction induced by left anterior descending artery ligation. Compared to sham treated animals, which exhibited aberrant electrical activity and larger myocardial scars, hpECM injected rat hearts showed a significant reduction in scar volume along with normal electrical activity of the surviving tissue, as determined by optical mapping. Conclusion Placental matrix and growth factors can be extracted as a hydrogel that effectively supports cardiomyocytes in vitro , and in vivo reduces scar formation while maintaining electrophysiological activity when injected into ischemic myocardium. Statement of Significance This is the first report of an original extracellular matrix hydrogel preparation isolated from human placentas (hpECM). hpECM is rich in collagens, laminin, fibronectin, glycoproteins, and growth factors, including known pro-regenerative, pro-angiogenic, anti-scarring, anti-inflammatory, and stem cell-recruiting factors. hpECM supports the culture of cardiomyocytes, stem cells and blood vessels assembly from endothelial cells. In a rat model of myocardial infarction, hpECM injections were safely deliverable to the ischemic myocardium. hpECM injections repaired the myocardium, resulting in a significant reduction in infarct size, more viable myocardium, and a normal electrophysiological contraction profile. hpECM thus has potential in therapeutic cardiovascular applications, in cellular therapies (as a delivery vehicle), and is a promising biomaterial for advancing basic cell-based research and regenerative medicine applications. [ABSTRACT FROM AUTHOR]

Porcine small intestine sub-mucosa (SIS) and cornea were decellularized using ionic biological detergent (1% SDS) and stored at -20°C in sterile phosphate buffer saline (PBS) solution containing mixture of antibiotics. The prepared biomaterials were subjected to histological and scanning electron microscopic observations to ascertain the deceTularization status before their clinical application. Both the biomaterials were evaluated for the repair of corneal defects in 11 animals. Five animals having corneal defects repaired with SIS and 4 repaired with cornea demonstrated successful healing without clinical signs of infections or reoccurrence during the 8 months follow up period. Results of study support the use of decellularized porcine SIS and cornea as an alternative to traditional implantation materials to treat different corneal defects in animals. [ABSTRACT FROM AUTHOR]

Abstract: Scaffolds derived from processed tissues offer viable alternatives to synthetic polymers as biological scaffolds for regenerative medicine. Tissue-derived scaffolds provide an extracellular matrix (ECM) as the starting material for wound healing and the functional reconstruction of tissues, offering a potentially valuable approach for the replacement of damaged or missing tissues. Additionally, acellular tissue may provide a natural microenvironment for host-cell migration and the induction of stem cell differentiation to contribute to tissue regeneration. There are a number of processing methods that aim to stabilize and provide an immunologically inert tissue scaffold. Furthermore, these tissue-processing methods can often be applied to xenogenic transplants because the essential components of the ECM are often maintained between species. In this study, we applied several tissue-processing protocols to the cornea in order to obtain a decellularized cornea matrix that maintained the clarity and mechanical properties of the native tissue. Histology, mechanical testing and electron microscopy techniques were used to assess the cell extraction process and the organization of the remaining ECM. In vitro cell seeding experiments confirmed the processed corneas’ biocompatibility. [Copyright &y& Elsevier]