103 results on '"Blanc, Christine"'
Search Results
2. ATG16L1 induces the formation of phagophore-like membrane cups
3. An XPS and TEM study of the composition and structure of native oxides on the inner surface of as-received Ni base alloy steam generator tubes
4. Corrosion Resistant Steels with High Mechanical Properties
5. Understanding the mechanisms of intergranular corrosion in 2024 Al alloy at the polycrystal scale
6. Multi-scale characterization of the inner surface of as-received steam generator tubes and correlation with the Ni release in primary water
7. List of Authors
8. Stress Corrosion Cracking. Between the Corrosion Defect and the Long Crack: the Phase of the Initiation of the Cracks
9. Introduction
10. Environment-Assisted Crack Initiation in Aluminum Alloys Studied by Local Probe Techniques
11. Susceptibility to Pitting and Environmentally Assisted Cracking of 17-4PH Martensitic Stainless Steel Produced by Laser Beam Melting
12. Phagophore formation by the autophagy conjugation machinery
13. Household transmission of SARS-CoV-2 infection in the Paris/Ile-de-France area
14. Combined XPS / TEM study of the chemical composition and structure of the passive film formed on additive manufactured 17-4PH stainless steel
15. On the Influence of Temperature on Hydrogen Embritllement Susceptibility of Alloy 718
16. Influence of Chloride Ions as Contaminants on the Corrosion Behavior of Alloy 718 in Pool Water of Nuclear Power Plants
17. Development of a Method for Studying the Influence of Stress State on the Iodine-Induced Stress Corrosion Cracking of Zirconium Alloys
18. Influence of Chloride Ions as Contaminants on the Corrosion Behavior of Alloy 718 in Pool Water of Nuclear Power Plants
19. Development of a method for studying the influence of stress state on the iodine-induced stress corrosion cracking of zirconium alloys
20. (Invited) Passivity and Pitting Corrosion Behavior of Additive Manufactured 17-4PH Stainless Steel
21. (Invited) Analysis By Electrochemical Impedance Spectroscopy of Passive Film Properties of Additive Manufactured 17-4PH Stainless Steel
22. Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting
23. Efficacy of intermittent short cycles of integrase inhibitor-based maintenance ART in virologically suppressed HIV patients
24. Pitting Corrosion Behaviour of the 6056-T78 Aluminium Alloy
25. Morphology, composition and structure of anodic films on binary Al-Cu alloys
26. Localized corrosion of 2024 alloy: structure and composition of oxide films grown on model alloys representative of the different metallurgical phases
27. Localized Approach of Galvanic Coupling on Aluminum-Magnesium Systems
28. On the Origin of the Imaginary Part of the Ohmic Impedance
29. Evaluation of the Local Chloride Concentration and the Local Mechanical Stresses in Intergranular Damages Grown on a 2024 Aluminum Alloy
30. Effect of the Thermomechanical History on the Corrosion Behavior of 6101 Aluminum-Magnesium-Silicon-Iron Alloy in NaCl Solutions
31. Nucleation and growth mechanisms of trivalent chromium conversion coatings on 2024-T3 aluminium alloy
32. Influence of hydrogen on the propagation of intergranular corrosion defects in 2024 aluminium alloy
33. A phase 1 dose escalation study of the oncolytic adenovirus enadenotucirev, administered intravenously to patients with epithelial solid tumors (EVOLVE)
34. Effect of trivalent chromium process on fatigue lifetime of 2024-T3 aluminium alloy
35. Accurate evaluations of both porosity and tortuosity of anodic films grown on rolled AA 1050 and on rolled or machined AA 2024 T3
36. Influence of the alloy microstructure and surface state on the protective properties of trivalent chromium coatings grown on a 2024 aluminium alloy
37. Corrosion behaviour of AA 1370 strands for wires: Identification of the critical metallurgical parameters
38. Influence of hydrogen on electrochemical behavior of Ni-based superalloy 718
39. Hydrogen diffusion and trapping in a low copper 7xxx aluminium alloy investigated by Scanning Kelvin Probe Force Microscopy
40. A Kelvin probe force microscopy study of hydrogen insertion and desorption into 2024 aluminum alloy
41. Phase 1 study of intravenous administration of the chimeric adenovirus enadenotucirev in patients undergoing primary tumor resection
42. Effect of temperature on hydrogen embrittlement susceptibility of alloy 718 in Light Water Reactor environment
43. Hydrogen mapping in an aluminum alloy using an alternating current scanning electrochemical microscope (AC-SECM)
44. Corrosion behaviour of an assembly between an AA1370 cable and a pure copper connector for car manufacturing applications
45. Characterization of intergranular corrosion defects in a 2024 T351 aluminium alloy
46. Characterization of intergranular corrosion defects in a 2024 T351 aluminium alloy
47. Effect of new sealing treatments on corrosion fatigue lifetime of anodized 2024 aluminium alloy
48. About the Role of Hydrogen in Stress Corrosion Cracking of a 7xxx Aluminium Alloy (Al-Zn-Mg)
49. Characterization of Intergranular Corrosion Defects in a 2024 T351 Aluminium Alloy
50. Dynamic measurements and wettability phenomena in mesoporous anodic films prepared on 1050 and 2024T3 aluminium alloys
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.