62 results on '"Kamke, Frederick A."'
Search Results
2. Dynamic moisture resistance of chemical and thermal modified plywood
3. Alkali Concentration and Diluent Effects on Properties of Grape Cane Fiber-Reinforced Polymer Composites
4. Dimensional Stability of Modified Wood Composite Panels
5. Utilization of the western juniper (Juniperus occidentalis) in strandboards to improve the decay resistance
6. Properties of the western juniper (Juniperus occidentalis) strandboard
7. Viscoelastic properties of thermo-hydro-mechanically treated beech (Fagus sylvatica L.) determined using dynamic mechanical analysis
8. Effect of Alkali Treatment on the Tensile Properties of Grape Cane Fibers by Integrating Digital Image Correlation Method
9. Comparison of alkali treatments on selected chemical, physical and mechanical properties of grape cane fibers
10. Effect of chemical and thermal modification, and material replacement on strand board properties
11. Performance of Light-Frame Timber Shear Walls Produced with Weathered Sheathing
12. Moisture Transport in Wood-Based Structural Panels under Transient Hygroscopic Conditions
13. WBCSim: A Prototype PSE for Wood-Based Composites Simulations
14. Method of Stabilizing Heavily Spalted Big Leaf Maple as a Decorative Coating Veneer Layer for Engineered Wood Flooring
15. Influence of Specimen Size on Accelerated Weathering of Laminated Veneer Lumber
16. Understanding the effect of weathering on adhesive bonds for wood composites using digital image correlation (DIC)
17. Laboratory and Outdoor Weathering of Wood-Composite I-Joists
18. Influence of specimen size during accelerated weathering of wood-based structural panels
19. A capacitive multi-wavelength sensor for moisture content gradient sensing in wood
20. Analysis of Adhesive Penetration into Wood using Nano-X-ray Computed Tomography
21. Bonding performance and mechanism of thermal-hydro-mechanical modified veneer
22. Bonding of densified beech wood using adhesives based on thermally modified soy proteins
23. Evaluation of a Wood-Strand Molded Core Sandwich Panel
24. Influence of temperature of thermal treatment on surface densification of spruce
25. Quantitative wood–adhesive penetration with X-ray computed tomography
26. Potential for Using Essential Oils to Protect Viscoelastic Thermal Compression–Treated Hybrid Poplar
27. X-ray computed tomography of wood-adhesive bondlines: attenuation and phase-contrast effects
28. Resistance of resin-impregnated VTC processed hybrid-poplar to fungal attack
29. Thermal Conductivity of Wood-Based Panels
30. A new quantitative method for evaluation of adhesive penetration pattern in particulate wood-based composites: elemental counting method
31. Comparison of transverse compression creep ofPseudotsuga menziesiiandPopulus sp. in high-temperature steam environments
32. The influence of thermal-hydro-mechanical processing on chemical characterization of Tsuga heterophylla
33. Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile
34. Phenol formaldehyde adhesives formulated for advanced X-ray imaging in wood-composite bondlines
35. Bending performance of 3-layer beech (Fagus sylvativa L.) and Norway spruce (Picea abies (L.) Karst.) VTC composites bonded with phenol–formaldehyde adhesive and liquefied wood
36. Influence of the thermo-hydro-mechanical treatments of wood on the performance against wood-degrading fungi
37. Transverse compression behavior of Douglas-fir (Pseudotsuga menziesii) in saturated steam environment
38. Erratum to: The wettability and bonding performance of densified VTC beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) bonded with phenol–formaldehyde adhesive and liquefied wood
39. The wettability and bonding performance of densified VTC beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) bonded with phenol–formaldehyde adhesive and liquefied wood
40. Integrated drying and thermo-hydro-mechanical modification of western hemlock veneer
41. Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography
42. Influence of temperature and steam environment on set recovery of compressive deformation of wood
43. Computational steering in the problem solving environment WBCSim
44. Influence of stress level on compression deformation of wood in 170°C transient steam conditions
45. Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite
46. Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C
47. Apparatus for viscoelastic thermal compression of wood
48. Fungal decay of viscoelastic thermal compressed (VTC) wood
49. Potential error in density profile measurements for wood composites
50. Phenol–formaldehyde impregnation of densified wood for improved dimensional stability
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.