274 results on '"Kato, Hidemi"'
Search Results
2. Correlating dynamic relaxation and viscoelasticity in metallic glasses
3. Correlation between mechanical properties and ionic conductivity of sodium superionic conductors: a relative density-dependent relationship
4. Bicontinuous microstructure formation of immiscible phases by the liquid metal replacement method and its application to Ti/Mg dissimilar joining
5. High entropy Fe–Mn–Ni–Co–Al–C alloys from an industrial steel
6. Quantifying Microstructural Heterogeneity in a High-Entropy Metallic Glass Through Dynamic and Stress Relaxation
7. The High-Temperature Deformation Behavior of Pd20pt20cu20ni20p20 Metallic Glass
8. Ti/Mg Dissimilar Joining By Eutectic-Melting-Induced Liquid Metal Dealloying
9. Ti/Mg Dissimilar Joining Using Eutectic-Melting-Induced Liquid Metal Dealloying
10. Effects and mechanisms of Nb and Fe additions on glass-forming ability and magnetic properties of a Co71.5Gd3.5B25 metallic glass
11. Exceptional abrasive wear resistance of immiscible Mg-Fe80Cr20 composites with 3D interconnected structure developed by liquid metal dealloying
12. Dissimilar Joining of Immiscible Fe–Mg using Solid Metal Dealloying
13. Development of Bicontinuous Nanoporous and Heterostructured Metals by Liquid Metal Dealloying
14. Fe-Mg phase equilibria under High-temperature and high-pressure conditions: experimental investigation and Calphad modeling
15. Wear Resistance of Spark Plasma Sintered Fe-Based Bmg Reinforced with Al2o3
16. Three mechanical relaxation modes associated with nanoscale structural heterogeneity in Pd42.5Ni7.5Cu30P20 fragile glass
17. Dissimilar Joining of Titanium and Magnesium Entangled by Phase Replacement
18. Fe20Mo20Ni20Rh20Ru20 and Fe14Mo35Ni15Rh15Ru21 Ultrahigh-Mixing-Entropy Alloys with Single Hexagonal Close-Packed Structure
19. Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys
20. Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects
21. Microstructure evolution and deformation mechanism of α+β dual-phase Ti-xNb-yTa-2Zr alloys with high performance
22. Mechanical behaviors of equiatomic and near-equiatomic face-centered-cubic phase high-entropy alloys probed using in situ neutron diffraction
23. Relationship between atomic structure and excellent glass forming ability in Pd42.5Ni7.5Cu30P20 metallic glass
24. Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis
25. Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production
26. Role of Fe substitution for Co on thermal stability and glass-forming ability of soft magnetic Co-based Co-Fe-B-P-C metallic glasses
27. Regulation of strength and ductility of single-phase twinning-induced plasticity high-entropy alloys
28. Effect of physical aging and cyclic loading on power-law creep of high-entropy metallic glass
29. Dealloying Toxic Ni from SUS316L Surface
30. Harnessing elastic anisotropy to achieve low-modulus refractory high-entropy alloys for biomedical applications
31. Fundamentals and Applications of Metallic Glasses, Nano-crystalline Materials and High Entropy Alloys
32. Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys
33. Solid solution induced back-stress in multi-principal element alloys: Experiment and modeling
34. Development of Porous Metals by Liquid Metal Dealloying
35. Nanoimprinting of magnetic FeCo-based metallic glass thin films
36. Evolution of microstructural complex transitions in low-modulus β-type Ti-35Nb-2Ta-3Zr alloy manufactured by laser powder bed fusion
37. A Fabry-Pérot cavity coupled surface plasmon photodiode for electrical biomolecular sensing
38. Superior phase transformation-assisted mechanical properties of a metastable medium-entropy ferrous alloy with heterogeneous microstructure
39. Hierarchical heterostructured FeCr–(Mg–Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying
40. Surface Modification by Liquid Metal Dealloying
41. Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying
42. 2.3 GPa cryogenic strength through thermal-induced and deformation-induced body-centered cubic martensite in a novel ferrous medium entropy alloy
43. Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying
44. Surface Improvement for Biocompatibility of Biomedical Ti Alloy by Dealloying in Metallic Melt
45. Surface Improvement for Biocompatibility of Ti-6Al-4V by Dealloying in Metallic Melt
46. Identifying the high entropy characteristic in La-based metallic glasses
47. New Ti/β-Ti alloy laminated composite processed by powder metallurgy: Microstructural evolution and mechanical property
48. In situ observation of liquid metal dealloying and etching of porous FeCr by X-ray tomography and X-ray diffraction
49. A strategy for enhancing the mechanical property of the precipitation-strengthened medium-entropy alloy
50. Temperature- and strain-dependent thermally-activated deformation mechanism of a ferrous medium-entropy alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.