Search

Genome length varies widely among organisms, from compact genomes of prokaryotes to vast and complex genomes of eukaryotes. In this study, we theoretically identify the evolutionary pressures that may have driven this divergence in genome length. We use a parameter-free model to study genome length evolution under selection pressure to minimize replication time and maximize information storage capacity. We show that prokaryotes tend to reduce genome length, constrained by a single replication origin, while eukaryotes expand their genomes by incorporating multiple replication origins. We propose a connection between genome length and cellular energetics, suggesting that endosymbiotic organelles, mitochondria and chloroplasts, evolutionarily regulate the number of replication origins, thereby influencing genome length in eukaryotes. We show that the above two selection pressures also lead to strict equalization of the number of purines and their corresponding base-pairing pyrimidines within a single DNA strand, known as Chagraff's second parity rule, a hitherto unexplained observation in genomes of nearly all known species. This arises from the symmetrization of replichore length, another observation that has been shown to hold across species, which our model reproduces. The model also reproduces other experimentally observed phenomena, such as a general preference for deletions over insertions, and elongation and high variance of genome lengths under reduced selection pressure for replication rate, termed the C-value paradox. We highlight the possibility of regulation of the firing of latent replication origins in response to cues from the extracellular environment leading to the regulation of cell cycle rates in multicellular eukaryotes.

Partitioning is a fundamental challenge for non-centralized control of large-scale systems, such as hierarchical, decentralized, distributed, and coalitional strategies. The problem consists of finding a decomposition of a network of dynamical systems into system units for which local controllers can be designed. Unfortunately, despite its critical role, a generalized approach to partitioning applicable to every system is still missing from the literature. This paper introduces a novel partitioning framework that integrates an algorithmic selection of fundamental system units (FSUs), considered indivisible entities, with an aggregative procedure, either algorithmic or optimization-based, to select composite system units (CSUs) made of several FSUs. A key contribution is the introduction of a global network metric, the partition index, which quantitatively balances intra- and inter-CSU interactions, with a granularity parameter accounting for the size of CSUs, allowing for their selection at different levels of aggregation. The proposed method is validated through case studies in distributed model predictive control (DMPC) for linear and hybrid systems, showing significant reductions in computation time and cost while maintaining or improving control performance w.r.t. conventional strategies., Comment: 15 pages, contains additional appendix with extra material

FeSe(11) family has a simple crystal structure belonging to iron-based superconductors (FBS) and has many stable phases including hexagonal and tetragonal structures, but only the tetragonal phase exhibits the superconductivity. In this study, we have investigated the effects of chemical pressure induced by As-doping at Se-sites in the FeSe system by preparing a series of FeSe1-xAsx (x = 0.005, 0.01, 0.02, 0.05, 0.1, and 0.2) bulks. A broad characterization has been performed on these samples using structural, microstructural, transport, and magnetic measurements. The obtained lattice parameters are increased by As-doping, which suggests the successful insertion of As at Se-sites into the tetragonal lattice for low doping contents up to 5%, whereas the higher As-substitution appears in the form of the FeAs impurity phase. The temperature dependence of the resistivity of all samples has similar behaviour and depicts the highest onset transition temperature of around 11.5 K, but the zero resistivity is not reached until the measured temperature of 7 K, which could be due to the presence of the impurity phases. Our study suggests that a dopant with a large ionic radius, i.e., Arsenic, promotes the formation of the hexagonal phase of the 11 family and is effective for a small amount of doping level for the superconducting properties, whereas higher As-doping levels reduce the superconducting properties., Comment: 18 pages, 6 figures

The challenging applications envisioned for the future Internet of Things networks are making it urgent to develop fast and scalable resource allocation algorithms able to meet the stringent reliability and latency constraints typical of the Ultra Reliable, Low Latency Communications (URLLC). However, there is an inherent tradeoff between complexity and performance to be addressed: sophisticated resource allocation methods providing optimized spectrum utilization are challenged by the scale of applications and the concomitant stringent latency constraints. Whether non-trivial resource allocation approaches can be successfully applied in large-scale network instances is still an open question that this paper aims to address. More specifically, we consider a scenario in which Channel State Information (CSI) is used to improve spectrum allocation in a radio environment that experiences channel time correlation. Channel correlation allows the usage of CSI for longer time before an update, thus lowering the overhead burden. Following this intuition, we propose a dynamic pilot transmission allocation scheme in order to adaptively tune the CSI age. We systematically analyze the improvement of this approach applied to a sophisticated, recently introduced graph-based resource allocation method that we extend here to account for CSI. The results show that, even in very dense networks and accounting for the higher computational time of the graph-based approach, this algorithm is able to improve spectrum efficiency by over 12% as compared to a greedy heuristic, and that dynamic pilot transmissions allocation can further boost its performance in terms of fairness, while concomitantly further increase spectrum efficiency of 3-5%. \, Comment: 12 pages, 11 figures

Event cameras, with a high dynamic range exceeding $120dB$, significantly outperform traditional embedded cameras, robustly recording detailed changing information under various lighting conditions, including both low- and high-light situations. However, recent research on utilizing event data has primarily focused on low-light image enhancement, neglecting image enhancement and brightness adjustment across a broader range of lighting conditions, such as normal or high illumination. Based on this, we propose a novel research question: how to employ events to enhance and adaptively adjust the brightness of images captured under broad lighting conditions? To investigate this question, we first collected a new dataset, SEE-600K, consisting of 610,126 images and corresponding events across 202 scenarios, each featuring an average of four lighting conditions with over a 1000-fold variation in illumination. Subsequently, we propose a framework that effectively utilizes events to smoothly adjust image brightness through the use of prompts. Our framework captures color through sensor patterns, uses cross-attention to model events as a brightness dictionary, and adjusts the image's dynamic range to form a broad light-range representation (BLR), which is then decoded at the pixel level based on the brightness prompt. Experimental results demonstrate that our method not only performs well on the low-light enhancement dataset but also shows robust performance on broader light-range image enhancement using the SEE-600K dataset. Additionally, our approach enables pixel-level brightness adjustment, providing flexibility for post-processing and inspiring more imaging applications. The dataset and source code are publicly available at:https://github.com/yunfanLu/SEE.

Ensuring trustworthiness in machine learning (ML) systems is crucial as they become increasingly embedded in high-stakes domains. This paper advocates for the integration of causal methods into machine learning to navigate the trade-offs among key principles of trustworthy ML, including fairness, privacy, robustness, accuracy, and explainability. While these objectives should ideally be satisfied simultaneously, they are often addressed in isolation, leading to conflicts and suboptimal solutions. Drawing on existing applications of causality in ML that successfully align goals such as fairness and accuracy or privacy and robustness, this paper argues that a causal approach is essential for balancing multiple competing objectives in both trustworthy ML and foundation models. Beyond highlighting these trade-offs, we examine how causality can be practically integrated into ML and foundation models, offering solutions to enhance their reliability and interpretability. Finally, we discuss the challenges, limitations, and opportunities in adopting causal frameworks, paving the way for more accountable and ethically sound AI systems.

Point defects in solid-state quantum systems are vital for enabling single-photon emission at specific wavelengths, making their precise identification essential for advancing applications in quantum technologies. However, pinpointing the microscopic origins of these defects remains a challenge. In this work, we propose Raman spectroscopy as a robust strategy for defect identification. Using density functional theory, we systematically characterize the Raman signatures of 100 defects in hexagonal boron nitride (hBN) spanning periodic groups III to VI, encompassing around 30,000 phonon modes. Our findings reveal that the local atomic environment plays a pivotal role in shaping the Raman lineshape, enabling the narrowing of potential defect candidates. Furthermore, we demonstrate that Raman spectroscopy can differentiate defects based on their spin and charge states as well as strain-induced variations, implying the versatility of this approach. Therefore, this study not only provides a comprehensive theoretical database of Raman spectra for hBN defects but also establishes a novel experiment framework for using tip-enhanced Raman spectroscopy to identify point defects. More broadly, our approach offers a universal method for defect identification in any quantum materials., Comment: 13 pages, 4 figures

Dust is a fundamental component of the interstellar medium (ISM) within galaxies, as dust grains are highly efficient absorbers of UV and optical photons. Accurately quantifying this obscuration is crucial for interpreting galaxy spectral energy distributions (SEDs). The extinction curves in the Milky Way (MW) and Large Magellanic Cloud (LMC) exhibit a strong feature known as the 2175A UV bump, most often attributed to small carbonaceous dust grains. This feature was recently detected in faint galaxies out to z~7 suggesting rapid formation channels. Here we report the detection of a strong UV bump in a luminous Lyman-break galaxy at z = 7.11235, GNWY-7379420231, through observations taken as part of the NIRSpec Wide GTO survey. We fit a dust attenuation curve that is consistent with the MW extinction curve within 1{\sigma}, in a galaxy just ~700 Myr after the Big Bang. From the integrated spectrum, we infer a young mass-weighted age (t* ~ 22-59 Myr) for this galaxy, however spatially resolved SED fitting unveils the presence of an older stellar population (t* ~ 252 Myr). Furthermore, morphological analysis provides evidence for a potential merger. The underlying older stellar population suggests the merging system could be pre-enriched, with the dust illuminated by a merger-induced starburst. Moreover, turbulence driven by stellar feedback in this bursty region may be driving PAH formation through top-down shattering. The presence of a UV bump in GNWY-7379420231 solidifies growing evidence for the rapid evolution of dust properties within the first billion years of cosmic time., Comment: Submitted to MNRAS

Quantum synchronization has been a subject of intensive research in the last decade. In this work, we propose a quantum Li\'enard system whose classical equivalent features two limit cycles to one of which the system will converge. In the quantum case, both limit cycles coexist in a single steady state. Each of these limit cycles localizes to a distinct phase if coupled to an external drive: one quantum state can thus be assigned two phases. Furthermore, coupling two such oscillators leads to the simultaneous appearance of synchronization and a synchronization blockade. To shed light on this apparent paradoxical result, we introduce finer measures of quantum synchronization., Comment: 6+6 pages, 3+4 figures

Wireless edge networks in smart industrial environments increasingly operate using advanced sensors and autonomous machines interacting with each other and generating huge amounts of data. Those huge amounts of data are bound to make data management (e.g., for processing, storing, computing) a big challenge. Current data management approaches, relying primarily on centralized data storage, might not be able to cope with the scalability and real time requirements of Industry 4.0 environments, while distributed solutions are increasingly being explored. In this paper, we introduce the problem of distributed data access in multi-hop wireless industrial edge deployments, whereby a set of consumer nodes needs to access data stored in a set of data cache nodes, satisfying the industrial data access delay requirements and at the same time maximizing the network lifetime. We prove that the introduced problem is computationally intractable and, after formulating the objective function, we design a two-step algorithm in order to address it. We use an open testbed with real devices for conducting an experimental investigation on the performance of the algorithm. Then, we provide two online improvements, so that the data distribution can dynamically change before the first node in the network runs out of energy. We compare the performance of the methods via simulations for different numbers of network nodes and data consumers, and we show significant lifetime prolongation and increased energy efficiency when employing the method which is using only decentralized low-power wireless communication instead of the method which is using also centralized local area wireless communication., Comment: This work was funded by the EC through the FoF-RIA Project AUTOWARE (No. 723909)

The recent discovery of altermagnetism has sparked renewed interest in the growth of epitaxial films of the NiAs-phase polymorph of CrSb. This paper describes the magnetron sputtering-based fabrication and characterization of high-quality single crystalline CrSb(0001) thin films supported by an isostructural non-magnetic PtSb buffer. X-ray diffraction and scanning transmission electron microscopy show that the films are phase-pure and possess a very high crystalline quality (mosaicity ~0.05 deg), while also being free of extended crystallographic defects. Both scanning electron microscopy and atomic force microscopy confirm their smooth and homogeneous topography. Additionally, the elemental composition of our films was found to be close to stoichiometric via electron probe microanalysis and X-ray fluorescence. Thus, the developed samples represent an ideal platform for further investigation of the material properties of CrSb.

We performed the detailed magnetotransport measurements and first principle calculations to study the electronic properties of the transition metal dipnictides ZrAs2, which is a topological nodal-line semimetal. Extremely large unsaturated magnetoresistance (MR) which is up to 1.9 * 10^4 % at 2 K and 14 T was observed with magnetic field along the c-axis. The nonlinear magnetic field dependence of Hall resistivity indicates the multi-band features, and the electron and hole are nearly compensated according to the analysis of the two-band model, which may account for the extremely large unsaturated MR at low temperatures. The evident Shubnikov-de Haas (SdH) oscillations at low temperatures are observed and four distinct oscillation frequencies are extracted. The first principle calculations and angle-dependent SdH oscillations reveal that the Fermi surface consists of three pockets with different anisotropy. The observed twofold symmetry MR with electric field along the b-axis direction is consistent with our calculated Fermi surface structures. Furthermore, the negative magnetoresistance (NMR) with magnetic field in parallel with electric field is observed, which is an evident feature of the chiral anomaly., Comment: Front. Phys. in press

Soft and future skills are in high demand in the modern job market. These skills are required for both technical and non-technical people. It is difficult to teach these competencies in a classical academic environment. The paper presents a possible approach to teaching in soft and future skills in a short, intensive joint project. In our case, it is a project within the Erasmus+ framework, but it can be organized in many different frameworks. In the project we use problem based learning, active learning and group-work teaching methodologies. Moreover, the approach put high emphasizes diversity. We arrange a set of multidisciplinary students in groups. Each group is working on software development tasks. This type of projects demand diversity, and only a part of the team needs technical skills. In our case less than half of participants had computer science background. Additionally, software development projects are usually interesting for non-technical students. The multicultural, multidisciplinary and international aspects are very important in a modern global working environment. On the other hand, short time of the project and its intensity allow to simulate stressful situations in a real word tasks. The effects of the project on the required competencies are measured using the KYSS method. The results prove that the presented method increased participants soft skills in communication, cooperation, digital skills and self reflection.

Single photon emitters in hexagonal boron nitride are based on fluorescent point-like defects. These defects typically have exceptional photophysical properties and therefore been the focus of extensive research due to their potential to advance photonic quantum technologies. However, achieving scalable integration of these emitters to arbitrary platforms with high yield while retaining their characteristics remains a significant challenge, particularly when the target substrate is not compatible with the fabrication method. In this work, we introduce an all-dry transfer method aimed at addressing these challenges with improved effectiveness compared to existing techniques. This polymer stamp-assisted transfer method maintains high output and preserves the fundamental characteristics of the emitters while eliminating wet chemical processes. A comprehensive post-transfer characterization verified not only the maintenance of the defining characteristic of a single photon emitter, the second-order correlation function $g^{(2)}(0)$, but also showed improvement by about 46%. In contrast, the lifetime, emission spectrum, and the photostability showed only negligible change, demonstrating that the characteristics of the emitters were retained during the transfer process. This transfer technique has success rate of 81.8%, determined by the proportion of single photon emitters that retain their optical and preserve physical structure post-transfer. This high success rate shows the potential to scale the integration of single photon emitters across diverse platforms. We expect that this process contributes to the applications of boron nitride defects in quantum technologies., Comment: 12

The integration of Environmental, Social, and Governance (ESG) factors into corporate decision-making is a fundamental aspect of sustainable finance. However, ensuring that business practices align with evolving regulatory frameworks remains a persistent challenge. AI-driven solutions for automatically assessing the alignment of sustainability reports and non-financial disclosures with specific ESG activities could greatly support this process. Yet, this task remains complex due to the limitations of general-purpose Large Language Models (LLMs) in domain-specific contexts and the scarcity of structured, high-quality datasets. In this paper, we investigate the ability of current-generation LLMs to identify text related to environmental activities. Furthermore, we demonstrate that their performance can be significantly enhanced through fine-tuning on a combination of original and synthetically generated data. To this end, we introduce ESG-Activities, a benchmark dataset containing 1,325 labelled text segments classified according to the EU ESG taxonomy. Our experimental results show that fine-tuning on ESG-Activities significantly enhances classification accuracy, with open models such as Llama 7B and Gemma 7B outperforming large proprietary solutions in specific configurations. These findings have important implications for financial analysts, policymakers, and AI researchers seeking to enhance ESG transparency and compliance through advanced natural language processing techniques.

Increased deployment of autonomous systems in fields like transportation and robotics have seen a corresponding increase in safety-critical failures. These failures can be difficult to model and debug due to the relative lack of data: compared to tens of thousands of examples from normal operations, we may have only seconds of data leading up to the failure. This scarcity makes it challenging to train generative models of rare failure events, as existing methods risk either overfitting to noise in the limited failure dataset or underfitting due to an overly strong prior. We address this challenge with CalNF, or calibrated normalizing flows, a self-regularized framework for posterior learning from limited data. CalNF achieves state-of-the-art performance on data-limited failure modeling and inverse problems and enables a first-of-a-kind case study into the root causes of the 2022 Southwest Airlines scheduling crisis., Comment: Published at ICLR 2025

Accurate tumor detection in digital pathology whole-slide images (WSIs) is crucial for cancer diagnosis and treatment planning. Multiple Instance Learning (MIL) has emerged as a widely used approach for weakly-supervised tumor detection with large-scale data without the need for manual annotations. However, traditional MIL methods often depend on classification tasks that require tumor-free cases as negative examples, which are challenging to obtain in real-world clinical workflows, especially for surgical resection specimens. We address this limitation by reformulating tumor detection as a regression task, estimating tumor percentages from WSIs, a clinically available target across multiple cancer types. In this paper, we provide an analysis of the proposed weakly-supervised regression framework by applying it to multiple organs, specimen types and clinical scenarios. We characterize the robustness of our framework to tumor percentage as a noisy regression target, and introduce a novel concept of amplification technique to improve tumor detection sensitivity when learning from small tumor regions. Finally, we provide interpretable insights into the model's predictions by analyzing visual attention and logit maps. Our code is available at https://github.com/DIAGNijmegen/tumor-percentage-mil-regression.

In this paper, we present a deep-learning method to filter out effects such as ambient noise, reflections, or source directivity from microphone array data represented as cross-spectral matrices. Specifically, we focus on a generative adversarial network (GAN) architecture designed to transform fixed-size cross-spectral matrices. Theses models were trained using sound pressure simulations of varying complexity developed for this purpose. Based on the results from applying these methods in a hyperparameter optimization of an auto-encoding task, we trained the optimized model to perform five distinct transformation tasks derived from different complexities inherent in our sound pressure simulations.

Recent advancements in AI and medical imaging offer transformative potential in emergency head CT interpretation for reducing assessment times and improving accuracy in the face of an increasing request of such scans and a global shortage in radiologists. This study introduces a 3D foundation model for detecting diverse neuro-trauma findings with high accuracy and efficiency. Using large language models (LLMs) for automatic labeling, we generated comprehensive multi-label annotations for critical conditions. Our approach involved pretraining neural networks for hemorrhage subtype segmentation and brain anatomy parcellation, which were integrated into a pretrained comprehensive neuro-trauma detection network through multimodal fine-tuning. Performance evaluation against expert annotations and comparison with CT-CLIP demonstrated strong triage accuracy across major neuro-trauma findings, such as hemorrhage and midline shift, as well as less frequent critical conditions such as cerebral edema and arterial hyperdensity. The integration of neuro-specific features significantly enhanced diagnostic capabilities, achieving an average AUC of 0.861 for 16 neuro-trauma conditions. This work advances foundation models in medical imaging, serving as a benchmark for future AI-assisted neuro-trauma diagnostics in emergency radiology.

When we manually design an evolutionary optimization algorithm, we implicitly or explicitly assume a set of target optimization problems. In the case of automated algorithm design, target optimization problems are usually explicitly shown. Recently, the use of large language models (LLMs) for the design of evolutionary multi-objective optimization (EMO) algorithms have been examined in some studies. In those studies, target multi-objective problems are not always explicitly shown. It is well known in the EMO community that the performance evaluation results of EMO algorithms depend on not only test problems but also many other factors such as performance indicators, reference point, termination condition, and population size. Thus, it is likely that the designed EMO algorithms by LLMs depends on those factors. In this paper, we try to examine the implicit assumption about the performance comparison of EMO algorithms in LLMs. For this purpose, we ask LLMs to design a benchmarking experiment of EMO algorithms. Our experiments show that LLMs often suggest classical benchmark settings: Performance examination of NSGA-II, MOEA/D and NSGA-III on ZDT, DTLZ and WFG by HV and IGD under the standard parameter specifications.

Clinical cohort definition is crucial for patient recruitment and observational studies, yet translating inclusion/exclusion criteria into SQL queries remains challenging and manual. We present an automated system utilizing large language models that combines criteria parsing, two-level retrieval augmented generation with specialized knowledge bases, medical concept standardization, and SQL generation to retrieve patient cohorts with patient funnels. The system achieves 0.75 F1-score in cohort identification on EHR data, effectively capturing complex temporal and logical relationships. These results demonstrate the feasibility of automated cohort generation for epidemiological research., Comment: 7 pages, 1 figure

Finding a positive state-space realization with the minimum dimension for a given transfer function is an open problem in control theory. In this paper, we focus on positive realizations in Markov form and propose a linear programming approach that computes them with a minimum dimension. Such minimum dimension of positive Markov realizations is an upper bound of the minimal positive realization dimension. However, we show that these two dimensions are equal for certain systems.

The increasing demands for high accuracy in mechatronic systems necessitate the incorporation of parameter variations in feedforward control. The aim of this paper is to develop a data-driven approach for direct learning of parameter-varying feedforward control to increase tracking performance. The developed approach is based on kernel-regularized function estimation in conjunction with iterative learning to directly learn parameter-varying feedforward control from data. This approach enables high tracking performance for feedforward control of linear parameter-varying dynamics, providing flexibility to varying reference tasks. The developed framework is validated on a benchmark industrial experimental setup featuring a belt-driven carriage.

Let $E_1, \ldots, E_m$ be (non necessarily Archimedean) Riesz spaces, let $F$ be an Archimedean Riesz space and let $A \colon E_1 \times \cdots \times E_m \to F$ be an order bounded disjointness preserving $m$-linear operator. We prove that all Arens extensions of $A$ are disjointness preserving if either $A$ has finite rank or the spaces are Banach lattices and $F^*$ has a Schauder basis consisting of disjointness preserving functionals., Comment: 14 pages

The OmpSs-2 programming model is used in HPC programs to parallelize code and offload code to accelerators. In this work, we extend the offloading capability to quantum computers. We explain the necessary changes to the Clang compiler and the Nanos6 runtime, which are both part of OmpSs-2. In addition, we develop a simulator that simulates a quantum computer in the network and receives the jobs offloaded by the runtime. Four detailed examples show how our programming model can be used to write hybrid quantum-classical software. The examples are random number generation, a parameter scan using the mean-field ansatz, a variational algorithm using this ansatz, and handwritten digit recognition using a hybrid convolutional neural network.

Generating adversarial safety-critical scenarios is a pivotal method for testing autonomous driving systems, as it identifies potential weaknesses and enhances system robustness and reliability. However, existing approaches predominantly emphasize unrestricted collision scenarios, prompting non-player character (NPC) vehicles to attack the ego vehicle indiscriminately. These works overlook these scenarios' authenticity, rationality, and relevance, resulting in numerous extreme, contrived, and largely unrealistic collision events involving aggressive NPC vehicles. To rectify this issue, we propose a three-layer relative safety region model, which partitions the area based on danger levels and increases the likelihood of NPC vehicles entering relative boundary regions. This model directs NPC vehicles to engage in adversarial actions within relatively safe boundary regions, thereby augmenting the scenarios' authenticity. We introduce AuthSim, a comprehensive platform for generating authentic and effective safety-critical scenarios by integrating the three-layer relative safety region model with reinforcement learning. To our knowledge, this is the first attempt to address the authenticity and effectiveness of autonomous driving system test scenarios comprehensively. Extensive experiments demonstrate that AuthSim outperforms existing methods in generating effective safety-critical scenarios. Notably, AuthSim achieves a 5.25% improvement in average cut-in distance and a 27.12% enhancement in average collision interval time, while maintaining higher efficiency in generating effective safety-critical scenarios compared to existing methods. This underscores its significant advantage in producing authentic scenarios over current methodologies.

A modern smart factory runs a manufacturing procedure using a collection of programmable machines. Typically, materials are ferried between these machines using a team of mobile robots. To embed a manufacturing procedure in a smart factory, a factory operator must a) assign its processes to the smart factory's machines and b) determine how agents should carry materials between machines. A good embedding maximizes the smart factory's throughput; the rate at which it outputs products. Existing smart factory management systems solve the aforementioned problems sequentially, limiting the throughput that they can achieve. In this paper we introduce ACES, the Anytime Cyclic Embedding Solver, the first solver which jointly optimizes the assignment of processes to machines and the assignment of paths to agents. We evaluate ACES and show that it can scale to real industrial scenarios., Comment: Accepted to ICRA 2025

This paper proposes {\sf AAPG-SPIDER}, an Adaptive Accelerated Proximal Gradient (AAPG) method with variance reduction for minimizing composite nonconvex finite-sum functions. It integrates three acceleration techniques: adaptive stepsizes, Nesterov's extrapolation, and the recursive stochastic path-integrated estimator SPIDER. While targeting stochastic finite-sum problems, {\sf AAPG-SPIDER} simplifies to {\sf AAPG} in the full-batch, non-stochastic setting, which is also of independent interest. To our knowledge, {\sf AAPG-SPIDER} and {\sf AAPG} are the first learning-rate-free methods to achieve optimal iteration complexity for this class of \textit{composite} minimization problems. Specifically, {\sf AAPG} achieves the optimal iteration complexity of $\mathcal{O}(N \epsilon^{-2})$, while {\sf AAPG-SPIDER} achieves $\mathcal{O}(N + \sqrt{N} \epsilon^{-2})$ for finding $\epsilon$-approximate stationary points, where $N$ is the number of component functions. Under the Kurdyka-Lojasiewicz (KL) assumption, we establish non-ergodic convergence rates for both methods. Preliminary experiments on sparse phase retrieval and linear eigenvalue problems demonstrate the superior performance of {\sf AAPG-SPIDER} and {\sf AAPG} compared to existing methods.

The anomalous Hall effect (AHE) is an efficient tool for detecting the N\'eel vector in collinear compensated magnets with spin-split bands, known as altermagnets (AMs). Here, we establish design principles for obtaining non-zero anomalous Hall conductivity in the recently proposed two-dimensional (2D) AMs using spin and magnetic group symmetry analysis. We show that only two of the seven nontrivial spin layer groups exhibit an unconventional in-plane AHE in which the N\'eel vector lies within the plane of the Hall current. Through first-principles simulations on bilayers of MnPSe$_3$ and MnSe, we demonstrate the validity of our group theoretic framework for obtaining AHE with $d$ and $i$-wave altermagnetic orders, depending on the stacking of the bilayers. We find that the spin group symmetry is successful in determining the linear and cubic dependence of anomalous Hall conductivity in N\'eel vector space, although AHE is a relativistic effect. This work shows that the AHE in 2D AMs can probe the altermagnetic order and N\'eel vector reversal, thereby facilitating the miniaturization of altermagnetic spintronics.

The question of whether large language models (LLMs) possess Theory of Mind (ToM) -- often defined as the ability to reason about others' mental states -- has sparked significant scientific and public interest. However, the evidence as to whether LLMs possess ToM is mixed, and the recent growth in evaluations has not resulted in a convergence. Here, we take inspiration from cognitive science to re-evaluate the state of ToM evaluation in LLMs. We argue that a major reason for the disagreement on whether LLMs have ToM is a lack of clarity on whether models should be expected to match human behaviors, or the computations underlying those behaviors. We also highlight ways in which current evaluations may be deviating from "pure" measurements of ToM abilities, which also contributes to the confusion. We conclude by discussing several directions for future research, including the relationship between ToM and pragmatic communication, which could advance our understanding of artificial systems as well as human cognition., Comment: under review

Searching for dark matter at high-energy colliders and direct detection experiments can effectively cover nearly the entire mass range from the MeV to the TeV scale. In this paper, we focus on four-fermion contact interactions formulated within the framework of Effective Field Theory. Specifically, we present a detailed analysis of mono-lepton production at the LHC. Our results demonstrate that tensor operators exhibit superior sensitivity in the mono-lepton channel, constraining energy scales up to 3\,TeV for a nearly massless dark fermion using current LHC data. Moreover, these operators mediate both spin-independent and spin-dependent absorption processes in nuclear targets. A systematic comparison of constraints between direct detection experiments and collider measurements reveals the LHC's distinct advantage in exploring sub-GeV dark matter candidates while maintaining competitive sensitivity at the TeV scale. Notably, direct detection experiments such as Super-Kamiokande and Borexino achieve complementary constraints in the 10-100\,TeV mass range through their unique capabilities: utilization of light nuclei targets, large exposure volumes, and distinctive features of the recoil energy spectra., Comment: 31 pages, 20 figures, 4 tables

Driving scene reconstruction and rendering have advanced significantly using the 3D Gaussian Splatting. However, most prior research has focused on the rendering quality along a pre-recorded vehicle path and struggles to generalize to out-of-path viewpoints, which is caused by the lack of high-quality supervision in those out-of-path views. To address this issue, we introduce an Inverse View Warping technique to create compact and high-quality images as supervision for the reconstruction of the out-of-path views, enabling high-quality rendering results for those views. For accurate and robust inverse view warping, a depth bootstrap strategy is proposed to obtain on-the-fly dense depth maps during the optimization process, overcoming the sparsity and incompleteness of LiDAR depth data. Our method achieves superior in-path and out-of-path reconstruction and rendering performance on the widely used Waymo Open dataset. In addition, a simulator-based benchmark is proposed to obtain the out-of-path ground truth and quantitatively evaluate the performance of out-of-path rendering, where our method outperforms previous methods by a significant margin.

Models that contain intersample behavior are important for control design of systems with slow-rate outputs. The aim of this paper is to develop a system identification technique for fast-rate models of systems where only slow-rate output measurements are available, e.g., vision-in-the-loop systems. In this paper, the intersample response is estimated by identifying fast-rate models through least-squares criteria, and the limitations of these models are determined. In addition, a method is developed that surpasses these limitations and is capable of estimating unique fast-rate models of arbitrary order by regularizing the least-squares estimate. The developed method utilizes fast-rate inputs and slow-rate outputs and identifies fast-rate models accurately in a single identification experiment. Finally, both simulation and experimental validation on a prototype wafer stage demonstrate the effectiveness of the framework.

Loday introduced di-associative algebras and tri-associative algebras motivated by periodicity phenomena in algebraic $K$-theory. The purpose of this paper is to study the splittings of operations of di-associative algebras and tri-associative algebras. First, we introduce the notion of a quadri-dendriform algebra, which is a splitting of a di-associative algebra. We show that a relative averaging operator on dendriform algebras gives rise to a quadri-dendriform algebra. Conversely, a quadri-dendriform algebra gives rise to a dendriform algebra and a representation such that the quotient map is a relative averaging operator. Furthermore, any quadri-dendriform algebra can be embedded into an averaging dendriform algebra. Finally, we introduce the notion of six-dendriform algebras, which are a splitting of tri-associative algebras, and demonstrate that homomorphic relative averaging operators induce six-dendriform algebras.

Retrieval in 3D point clouds is a challenging task that consists in retrieving the most similar point clouds to a given query within a reference of 3D points. Current methods focus on comparing descriptors of point clouds in order to identify similar ones. Due to the complexity of this latter step, here we focus on the acceleration of the retrieval by adapting the Differentiable Search Index (DSI), a transformer-based approach initially designed for text information retrieval, for 3D point clouds retrieval. Our approach generates 1D identifiers based on the point descriptors, enabling direct retrieval in constant time. To adapt DSI to 3D data, we integrate Vision Transformers to map descriptors to these identifiers while incorporating positional and semantic encoding. The approach is evaluated for place recognition on a public benchmark comparing its retrieval capabilities against state-of-the-art methods, in terms of quality and speed of returned point clouds., Comment: 8 pages, 1 figures

We introduce a new stable birational invariant, which takes the form of a functor sending a degenerating variety to the homotopy type of a chain complex. Our invariant is a categorification of the motivic volume of Nicaise and Shinder. From the class of the chain complex in a Grothendieck group, we obtain a motivic obstruction to retract rationality, valued in a quotient of the Grothendieck ring of varieties. In addition, we construct a general class of stable birational invariants, with the invariant above as the universal example, given by applying any chosen stable birational invariant (e.g., unramified cohomology) to the strata of a semistable degeneration., Comment: 49 pages, 1 figure. Comments welcome!

The goal of model reference adaptive control (MRAC) is to ensure that the trajectories of an unknown dynamical system track those of a given reference model. This is done by means of a feedback controller that adaptively changes its gains using data collected online from the closed-loop system. One of the approaches to solve the MRAC problem is to impose conditions on the data that guarantee convergence of the gains to a solution of the so-called matching equations. In the literature, various extensions of the concept of persistent excitation have been proposed in an effort to weaken the conditions on the data required for this convergence.Despite these efforts, it is not well-understood what are the weakest possible data requirements ensuring convergence of MRAC. In this paper, we propose a new framework to study the MRAC problem, using the concept of data informativity. Our main contribution is to provide \textit{necessary and sufficient} conditions for the convergence of the adaptive gains to a solution of the matching equations. These necessary and sufficient conditions can be readily checked online as new data are generated by the closed-loop system. Our results reveal that existing excitation conditions impose stronger requirements on the collected data than required. Notably, the necessary and sufficient conditions provided in this paper are weaker than those for unique system identification.

We analyze the spin glass transition in a field in finite dimension $D$ below the upper critical dimension directly at zero temperature using a recently introduced perturbative loop expansion around the Bethe lattice solution. The expansion is generated by the so-called $M$-layer construction, and it has $1/M$ as the associated small parameter. Computing analytically and numerically these non-standard diagrams at first order in the $1/M$ expansion, we construct an $\epsilon$-expansion around the upper critical dimension $D_\text{uc}=8$, with $\epsilon=D_\text{uc}-D$. Following standard field theoretical methods, we can write a $\beta$ function, finding a new zero-temperature fixed-point associated with the spin glass transition in a field in dimensions $D<8$. We are also able to compute, at first order in the $\epsilon$-expansion, the three independent critical exponents characterizing the transition, plus the correction-to-scaling exponent.

This paper presents a first measurement of the cross-section for the charged-current Drell-Yan process $pp\rightarrow W^{\pm} \rightarrow \ell^{\pm} \nu$ above the resonance region, where $\ell$ is an electron or muon. The measurement is performed for transverse masses, $m_{\text{T}}^{\text{W}}$, between 200 GeV and 5000 GeV, using a sample of 140~fb$^{-1}$ of $pp$ collision data at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the LHC during 2015-2018. The data are presented single differentially in transverse mass and double differentially in transverse mass and absolute lepton pseudorapidity. A test of lepton flavour universality shows no significant deviations from the Standard Model. The electron and muon channel measurements are combined to achieve a total experimental precision of 3% at low $m_{\text{T}}^{\text{W}}$. The single- and double differential $W$-boson charge asymmetries are evaluated from the measurements. A comparison to next-to-next-to-leading-order perturbative QCD predictions using several recent parton distribution functions and including next-to-leading-order electroweak effects indicates the potential of the data to constrain parton distribution functions. The data are also used to constrain four fermion operators in the Standard Model Effective Field Theory formalism, in particular the lepton-quark operator Wilson coefficient $c_{\ell q}^{(3)}.$, Comment: 64 pages in total, author list starting page 47, 21 figures, 3 tables, submitted to JHEP. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2018-41

Large language models (LLMs) have shown impressive abilities in answering questions across various domains, but they often encounter hallucination issues on questions that require professional and up-to-date knowledge. To address this limitation, retrieval-augmented generation (RAG) techniques have been proposed, which retrieve relevant information from external sources to inform their responses. However, existing RAG methods typically focus on a single type of external data, such as vectorized text database or knowledge graphs, and cannot well handle real-world questions on semi-structured data containing both text and relational information. To bridge this gap, we introduce PASemiQA, a novel approach that jointly leverages text and relational information in semi-structured data to answer questions. PASemiQA first generates a plan to identify relevant text and relational information to answer the question in semi-structured data, and then uses an LLM agent to traverse the semi-structured data and extract necessary information. Our empirical results demonstrate the effectiveness of PASemiQA across different semi-structured datasets from various domains, showcasing its potential to improve the accuracy and reliability of question answering systems on semi-structured data.

In the metric distortion problem, a set of voters and candidates lie in a common metric space, and a committee of $k$ candidates is to be elected. The goal is to select a committee with a small social cost, defined as an increasing function of the distances between voters and selected candidates, but a voting rule only has access to voters' ordinal preferences. The distortion of a rule is then defined as the worst-case ratio between the social cost of the selected set and the optimal set, over all possible preferences and consistent distances. We initiate the study of metric distortion when voters and candidates coincide, which arises naturally in peer selection, and provide tight results for various social cost functions on the line metric. We consider both utilitarian and egalitarian social cost, given by the sum and maximum of the individual social costs, respectively. For utilitarian social cost, we show that the voting rule that selects the $k$ middle agents achieves a distortion that varies between $1$ and $2$ as $k$ varies from $1$ to $n$ when the cost of an individual is the sum of their distances to all selected candidates (additive aggregation). When the cost of an individual is their distance to their $q$th closest candidate ($q$-cost), we provide positive results for $q=k=2$ but mostly show that negative results for general elections carry over to our setting: No constant distortion is possible when $q\leq k/2$ and no distortion better than $3/2$ is possible for $q\geq k/2+1$. For egalitarian social cost, selecting extreme agents achieves the best-possible distortion of $2$ for additive cost and $q$-cost with $q> k/3$, whereas no constant distortion is possible for $q\leq k/3$. Overall, having a common set of voters and candidates allows for better constants compared to the general setting, but cases in which no constant is possible in general remain hard in this setting.

The success of foundation models in natural language processing and computer vision has motivated similar approaches for general time series analysis. While these models are effective for a variety of tasks, their applicability in medical domains with limited data remains largely unexplored. To address this, we investigate the effectiveness of foundation models in medical time series analysis involving electroencephalography (EEG). Through extensive experiments on tasks such as age prediction, seizure detection, and the classification of clinically relevant EEG events, we compare their diagnostic accuracy with that of specialised EEG models. Our analysis shows that foundation models extract meaningful EEG features, outperform specialised models even without domain adaptation, and localise task-specific biomarkers. Moreover, we demonstrate that diagnostic accuracy is substantially influenced by architectural choices such as context length. Overall, our study reveals that foundation models with general time series understanding eliminate the dependency on large domain-specific datasets, making them valuable tools for clinical practice.

Badminton, known for having the fastest ball speeds among all sports, presents significant challenges to the field of computer vision, including player identification, court line detection, shuttlecock trajectory tracking, and player stroke-type classification. In this paper, we introduce a novel video segmentation strategy to extract frames of each player's racket swing in a badminton broadcast match. These segmented frames are then processed by two existing models: one for Human Pose Estimation to obtain player skeletal joints, and the other for shuttlecock trajectory detection to extract shuttlecock trajectories. Leveraging these joints, trajectories, and player positions as inputs, we propose Badminton Stroke-type Transformer (BST) to classify player stroke-types in singles. To the best of our knowledge, experimental results demonstrate that our method outperforms the previous state-of-the-art on the largest publicly available badminton video dataset, ShuttleSet, which shows that effectively leveraging ball trajectory is likely to be a trend for racket sports action recognition., Comment: 8 pages (excluding references). The code will be released in a few months

Diffraction is a phenomenon, discussed for centuries from various points of view. The very simple principle, proposed by Huygens [1] and then modified by Fresnel[2], Stokes [3] and Kirchoff [4], allows us to make calculations, substituting an incident wave by the multitude of waves, radiated by the number of secondary sources with regard for interference. Besides mentioned scientists, many others have contributed to this theory. A reasonable historical review can reveal a challenging history of the research of this phenomenon with many names and this story is not still ended. A good historical re-view can be seen in [5]. Classical cases of the diffraction by a hole and a disk are included in many text-books for scholars. Nevertheless, there is still some place for discussions. This paper is an attempt to discuss some computational issues, based on the original Huygens-Fresnel-Kirchoff method and apply it to 3D objects., Comment: 10 pages, 20 figures

GUI prototyping serves as one of the most valuable techniques for enhancing the elicitation of requirements and facilitating the visualization and refinement of customer needs. While GUI prototyping has a positive impact on the software development process, it simultaneously demands significant effort and resources. The emergence of Large Language Models (LLMs) with their impressive code generation capabilities offers a promising approach for automating GUI prototyping. Despite their potential, there is a gap between current LLM-based prototyping solutions and traditional user-based GUI prototyping approaches which provide visual representations of the GUI prototypes and direct editing functionality. In contrast, LLMs and related generative approaches merely produce text sequences or non-editable image output, which lacks both mentioned aspects and therefore impede supporting GUI prototyping. Moreover, minor changes requested by the user typically lead to an inefficient regeneration of the entire GUI prototype when using LLMs directly. In this work, we propose GUIDE, a novel LLM-driven GUI generation decomposition approach seamlessly integrated into the popular prototyping framework Figma. Our approach initially decomposes high-level GUI descriptions into fine-granular GUI requirements, which are subsequently translated into Material Design GUI prototypes, enabling higher controllability and more efficient adaption of changes. To efficiently conduct prompting-based generation of Material Design GUI prototypes, we propose a retrieval-augmented generation approach to integrate the component library. Our preliminary evaluation demonstrates the effectiveness of GUIDE in bridging the gap between LLM generation capabilities and traditional GUI prototyping workflows, offering a more effective and controlled user-based approach to LLM-driven GUI prototyping. Video: https://youtu.be/C9RbhMxqpTU

We propose using the wave function generated by the quantum selected configuration interaction (QSCI) method as the trial wave function in phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC). In the QSCI framework, electronic configurations are sampled from the quantum state realized on a quantum computer. These configurations serve as basis states for constructing an effective Hamiltonian, which is then diagonalized to obtain the corresponding eigenstate. Using this wave function, ph-AFQMC is performed to recover the dynamical electron correlation across the whole orbital space. The use of the QSCI trial wave function is expected to improve the feasibility of the quantum-classical (QC) hybrid quantum Monte Carlo approach [Nature, 603, 416 (2022)]. We call this integrated approach QC-QSCI-AFQMC, or QSCI-AFQMC for short. This method is validated across several molecular systems. For H2O and a linear H4 chain, we achieved chemical accuracy in most investigations relative to full configuration interaction while utilizing superconducting quantum computers at Osaka University and RIKEN. Additionally, the application of QSCI-AFQMC to the O-H bond dissociation in an organic molecule highlights the complementary synergy between capturing static correlation on quantum hardware and incorporating dynamical correlation via classical post-processing. For the N2, when QSCI-AFQMC is executed with a noiseless simulator, it ranks among the most accurate methods compared to various multireference electronic structure theories. Although the proposed method is demonstrated using small active spaces on current quantum devices, the concept is not limited to few-qubit problems. The QSCI-AFQMC can compete with state-of-the-art classical computational techniques, particularly in larger active spaces, displaying considerable potential for resolving classically intractable problems in quantum chemistry., Comment: 10 pages, 8 figures

Let $Y$ be an Enriques surface and let $\mathcal{A}$ be an Azumaya algebra corresponding to the non-trivial Brauer class. Let $M$ be the moduli space of stable twisted sheaves on Enriques surfaces with twisted Chern character $M^H_{\mathcal{A}/Y}(2,c_1,\operatorname{ch}_2)$ with virtual dimension $N$. We show that the virtual Euler characteristic $e^\mathrm{vir}(M)$ only depends on $N$, more precisely, $e^\mathrm{vir}(M)=0$ when $N$ is odd and $e^\mathrm{vir}(M)=2\cdot e(Y^{[\frac{N}{2}]})$ when $N$ is even., Comment: 24 pages

Neural synchrony is hypothesized to play a crucial role in how the brain organizes visual scenes into structured representations, enabling the robust encoding of multiple objects within a scene. However, current deep learning models often struggle with object binding, limiting their ability to represent multiple objects effectively. Inspired by neuroscience, we investigate whether synchrony-based mechanisms can enhance object encoding in artificial models trained for visual categorization. Specifically, we combine complex-valued representations with Kuramoto dynamics to promote phase alignment, facilitating the grouping of features belonging to the same object. We evaluate two architectures employing synchrony: a feedforward model and a recurrent model with feedback connections to refine phase synchronization using top-down information. Both models outperform their real-valued counterparts and complex-valued models without Kuramoto synchronization on tasks involving multi-object images, such as overlapping handwritten digits, noisy inputs, and out-of-distribution transformations. Our findings highlight the potential of synchrony-driven mechanisms to enhance deep learning models, improving their performance, robustness, and generalization in complex visual categorization tasks.

The current development trend of wireless communications aims at coping with the very stringent reliability and latency requirements posed by several emerging Internet of Things (IoT) application scenarios. Since the problem of realizing Ultra Reliable Low-Latency Communications (URLLC) is becoming more and more important, it has attracted the attention of researchers, and new efficient resource allocation algorithms are necessary. In this paper, we consider a challenging scenario where the available spectrum might be fragmented across non-adjacent portions of the band, and channels are differently affected by interference coming from surrounding networks. Furthermore, Channel State Information (CSI) is assumed to be unavailable, thus requiring an allocation of resources based only on topology information and channel statistics. To address this challenge in a dense smart factory scenario where devices periodically transmit their data to a common receiver, we present a novel resource allocation methodology based on a graph-theoretical approach originally designed to allocate mobility resources in on-demand, shared transportation. The proposed methodology is compared with two benchmark allocation strategies, showing its ability of increasing spectral efficiency of as much as 50% with respect to the best performing benchmark. Contrary to what happens in many resource allocation settings, this increase in spectrum efficiency does not come at the expense of fairness, which is also increased as compared to benchmark algorithms., Comment: 16 pages, 15 figures

In the finite volume framework, a Lax-Wendrof type second-order flux solver for the compressible Navier-Stokes equations is proposed by utilizing a hyperbolic relaxation model. The flux solver is developed by applying the generalized Riemann problem (GRP) method to the relaxation model that approximates the compressible Navier-Stokes equations. The GRP-based flux solver includes the effects of source terms in numerical fluxes and treats the stiff source terms implicitly, allowing a CFL condition conventionally used for the Euler equations. The trade-off is to solve linear systems of algebraic equations. The resulting numerical scheme achieves second-order accuracy within a single stage, and the linear systems are solved only once in a time step. The parameters to establish the relaxation model are allowed to be locally determined at each cell interface, improving the adaptability to diverse flow regions. Numerical tests with a wide range of flow problems, from nearly incompressible to supersonic flows with strong shocks, for both inviscid and viscous problems, demonstrate the high resolution of the current second-order scheme.