Search

The Off-plane Grating Rocket Experiment (OGRE) is a soft X-ray grating spectrometer to be flown on a suborbital rocket. The payload is designed to obtain the highest-resolution soft X-ray spectrum of Capella to date with a resolution goal of $R(\lambda/\Delta\lambda)>2000$ at select wavelengths in its 10--55 Angstrom bandpass of interest. The optical design of the spectrometer realizes a theoretical maximum resolution of $R\approx5000$, but this performance does not consider the finite performance of the individual spectrometer components, misalignments between components, and in-flight pointing errors. These errors all degrade the performance of the spectrometer from its theoretical maximum. A comprehensive line-spread function (LSF) error budget has been constructed for the OGRE spectrometer to identify contributions to the LSF, to determine how each of these affects the LSF, and to inform performance requirements and alignment tolerances for the spectrometer. In this document, the comprehensive LSF error budget for the OGRE spectrometer is presented, the resulting errors are validated via raytrace simulations, and the implications of these results are discussed., Comment: 26 pages, 9 figures, preprint of a manuscript accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)

The soft X-ray grating spectrometer on board the Off-plane Grating Rocket Experiment (OGRE) hopes to achieve the highest resolution soft X-ray spectrum of an astrophysical object when it is launched via suborbital rocket. Paramount to the success of the spectrometer are the performance of the $>250$ reflection gratings populating its reflection grating assembly. To test current grating fabrication capabilities, a grating prototype for the payload was fabricated via electron-beam lithography at The Pennsylvania State University's Materials Research Institute and was subsequently tested for performance at Max Planck Institute for Extraterrestrial Physics' PANTER X-ray Test Facility. Bayesian modeling of the resulting data via Markov chain Monte Carlo (MCMC) sampling indicated that the grating achieved the OGRE single-grating resolution requirement of $R_{g}(\lambda/\Delta\lambda)>4500$ at the 94% confidence level. The resulting $R_g$ posterior probability distribution suggests that this confidence level is likely a conservative estimate though, since only a finite $R_g$ parameter space was sampled and the model could not constrain the upper bound of $R_g$ to less than infinity. Raytrace simulations of the system found that the observed data can be reproduced with a grating performing at $R_g=\infty$. It is therefore postulated that the behavior of the obtained $R_g$ posterior probability distribution can be explained by a finite measurement limit of the system and not a finite limit on $R_g$. Implications of these results and improvements to the test setup are discussed., Comment: 25 pages, 16 figures, preprint of an article accepted for publication in the Journal of Astronomical Instrumentation \copyright 2020 [copyright World Scientific Publishing Company] [https://www.worldscientific.com/worldscinet/jai]

Gratings enable dispersive spectroscopy from the X-ray to the optical, and feature prominently in proposed flagships and SmallSats alike. The exacting performance requirements of these future missions necessitate assessing whether the present state-of-the-art in grating manufacture will limit spectrometer performance. In this work, we manufacture a 1.5 mm thick, 1000 nm period at grating using electron-beam lithography (EBL), a promising lithographic technique for patterning gratings for future astronomical observatories. We assess the limiting spectral resolution of this grating by interferometrically measuring the diffracted wavefronts produced in +/-1st order. Our measurements show this grating has a performance of at least R ~ 14,600, and that our assessment is bounded by the error of our interferometric measurement. The impact of EBL stitching error on grating performance is quantifed, and a path to measuring the period error of customized, curved gratings is presented.

Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be used to achieve excellent throughput into orders achieving high resolutions. We have fabricated two off-plane gratings with blazed groove profiles via a technique which uses commonly available microfabrication processes, is easily scaled for mass production, and yields gratings customized for a given mission architecture. Both fabricated gratings were tested in the Littrow mounting at the Max-Planck-Institute for extraterrestrial Physics PANTER X-ray test facility to assess their performance. The line spread functions of diffracted orders were measured, and a maximum resolution of 800 $\pm$ 20 is reported. In addition, we also observe evidence of a `blaze' effect from measurements of relative efficiencies of the diffracted orders., Comment: 25 pages including references

An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane gratings were actively aligned to each other and with a SPO to produce an overlapped spectrum. The gratings were aligned using an active alignment module which allows for the independent manipulation of subsequent gratings to a reference grating in three degrees of freedom using picomotor actuators which are controllable external to the test chamber. We report the line spread functions of the spectrograph and the actively aligned gratings, and plans for future development., Comment: Draft Version March 19, 2015