Search

We present evidence for strong radiative cooling in a pulsed-power-driven magnetic reconnection experiment. Two aluminum exploding wire arrays, driven by a 20 MA peak current, 300 ns rise time pulse from the Z machine (Sandia National Laboratories), generate strongly-driven plasma flows ($M_A \approx 7$) with anti-parallel magnetic fields, which form a reconnection layer ($S_L \approx 120$) at the mid-plane. The net cooling rate far exceeds the Alfv\'enic transit rate ($\tau_{\text{cool}}^{-1}/\tau_{\text{A}}^{-1} > 100$), leading to strong cooling of the reconnection layer. We determine the advected magnetic field and flow velocity using inductive probes positioned in the inflow to the layer, and inflow ion density and temperature from analysis of visible emission spectroscopy. A sharp decrease in X-ray emission from the reconnection layer, measured using filtered diodes and time-gated X-ray imaging, provides evidence for strong cooling of the reconnection layer after its initial formation. X-ray images also show localized hotspots, regions of strong X-ray emission, with velocities comparable to the expected outflow velocity from the reconnection layer. These hotspots are consistent with plasmoids observed in 3D radiative resistive magnetohydrodynamic simulations of the experiment. X-ray spectroscopy further indicates that the hotspots have a temperature (170 eV) much higher than the bulk layer ($\leq$ 75 eV) and inflow temperatures (about 2 eV), and that these hotspots generate the majority of the high-energy (> 1 keV) emission.

We present results from the first experimental study of strongly radiatively-cooled magnetic reconnection. Two exploding aluminum wire arrays, driven simultaneously by the Z machine ($I_{max} = 20 \, \text{MA}$, $t_{\text{rise}} = 300 \, \text{ns}$), generate a radiatively-cooled reconnection layer ($S_L \approx 120$) in which the total cooling rate exceeds the hydrodynamic transit rate ($\tau_{\text{hydro}}/\tau_{\text{cool}} > 100$). Measurements of X-ray emission from the reconnection layer using a filtered diode ($>1$ keV) show a narrow (50 ns FWHM) burst of emission at 220 ns after current start, consistent with the formation and subsequent rapid cooling of the reconnection layer. Time-gated X-ray images of the reconnection layer show fast-moving (up to 50 km/s) hotspots inside the layer, consistent with the presence of plasmoids observed in 3D resistive magnetohydrodynamic simulations. X-ray spectroscopy shows that these hotspots generate the majority of Al K-shell emission (at around 1.6 keV) prior to the onset of cooling, and exhibit temperatures of 170 eV, much greater than the temperature of the plasma inflows and the rest of the reconnection layer.

We present the results of the first Charged-Particle Transport Coefficient Code Comparison Workshop, which was held in Albuquerque, NM October 4-6, 2016. In this first workshop, scientists from eight institutions and four countries gathered to compare calculations of transport coefficients including thermal and electrical conduction, electron-ion coupling, inter-ion diffusion, ion viscosity, and charged particle stopping powers. Here, we give general background on Coulomb coupling and computational expense, review where some transport coefficients appear in hydrodynamic equations, and present the submitted data. Large variations are found when either the relevant Coulomb coupling parameter is large or computational expense causes difficulties. Understanding the general accuracy and uncertainty associated with such transport coefficients is important for quantifying errors in hydrodynamic simulations of inertial confinement fusion and high-energy density experiments., Comment: 45 pages, 17 figures

We report on the results of the 10th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At this workshop, fifteen codes from eleven institutions contributed results for steady-state and time-dependent neon, aluminum, silicon, and chlorine cases relevant to a variety of high-density experimental and radiation-driven astrophysical systems. This report focuses on differences in the predictions from codes with different internal structure, completeness, density effects, and rate fidelity and the impact of those differences on hot, dense plasma diagnostics., Comment: submitted to HEDP

Recent R-matrix calculations claim to produce a significant enhancement in the opacity of Fe XVII due to atomic core excitations [S. N. Nahar & A.K. Pradhan, Phys. Rev. Letters 116, 235003 (2016), arXiv:1606.02731] and assert that this enhancement is consistent with recent measurements of higher-than-predicted iron opacities [J. E. Bailey et al., Nature 517, 56 (2015)]. This comment shows that the standard opacity models which have already been directly compared with experimental data produce photon absorption cross-sections for Fe XVII that are effectively equivalent to (and in fact larger than) the new R-matrix opacities. Thus, the new R-matrix results cannot be expected to significantly impact the existing discrepancies between theory and experiment because they produce neither a "large enhancement" nor account for "missing continuum plasma opacity" relative to standard models., Comment: three pages, one table, one figure

In this paper, we explore magnetized liner inertial fusion (MagLIF) [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)] using a semi-analytic model [R. D. McBride and S. A. Slutz, Phys. Plasmas 22, 052708 (2015)]. Specifically, we present simulation results from this model that: (a) illustrate the parameter space, energetics, and overall system efficiencies of MagLIF; (b) demonstrate the dependence of radiative loss rates on the radial fraction of the fuel that is preheated; (c) explore some of the recent experimental results of the MagLIF program at Sandia National Laboratories [M. R. Gomez et al., Phys. Rev. Lett. 113, 155003 (2014)]; (d) highlight the experimental challenges presently facing the MagLIF program; and (e) demonstrate how increases to the preheat energy, fuel density, axial magnetic field, and drive current could affect future MagLIF performance., Comment: Published in Physics of Plasmas [http://dx.doi.org/10.1063/1.4939479]

Experimental tests are in progress to evaluate the accuracy of the modeled iron opacity at solar interior conditions, in particular to better constrain the solar abundance problem [S. Basu and H.M. Antia, Physics Reports 457, 217 (2008)]. Here we describe measurements addressing three of the key requirements for reliable opacity experiments: control of sample conditions, independent sample condition diagnostics, and verification of sample condition uniformity. The opacity samples consist of iron/magnesium layers tamped by plastic. By changing the plastic thicknesses, we have controlled the iron plasma conditions to reach i) Te=167+/-3 eV and ne=(7.1+/-1.5)e21 e/cc, ii) Te=170+/-2 eV and ne=(2.0+/-0.2)e22 e/cc, and iii) Te=196+/-6 eV and ne=(3.8+/-0.8)e22 e/cc, which were measured by magnesium tracer K-shell spectroscopy. The opacity sample non-uniformity was directly measured by a separate experiment where Al is mixed into the side of the sample facing the radiation source and Mg into the other side. The iron condition was confirmed to be uniform within their measurement uncertainties by Al and Mg K-shell spectroscopy. The conditions are suitable for testing opacity calculations needed for modeling the solar interior, other stars, and high energy density plasmas., Comment: Published online 14 May 2014

We have studied the propagation of fast electrons through laser irradiated Ti foils by monitoring the emission of hard X-rays and K-{\alpha} radiation from bare foils and foils backed by a thick epoxy layer. Key observations include strong refluxing of electrons and divergence of the electron beam in the foil with evidence of magnetic field collimation. Our diagnostics have allowed us to estimate the fast electron temperature and fraction of laser energy converted to fast electrons. We have observed clear differences between the fast electron temperatures observed with bare and epoxy backed targets which may be due to the effects of refluxing.