Search

Neuromorphic computing aims to revolutionize large-scale data processing by developing efficient methods and devices inspired by neural networks. Among these, the control of magnetism through ion migration has emerged as a promising approach due to the inherent memory and nonlinearity of ionically conducting and magnetic materials. In this work, we present a lithium-ion-based magneto-ionic device that uses applied voltages to control the magnetic domain state of a perpendicularly magnetized ferromagnetic layer. This behavior emulates the analog and non-volatile properties of biological synapses and enables the creation of a simple reservoir computing system. To illustrate its capabilities, the device is used in a waveform classification task, where the voltage amplitude range and magnetic bias field are tuned to optimize the recognition accuracy., Comment: 11 pages, 7 figures

The electric-field control of magnetism is a highly promising and potentially effective approach for achieving energy-efficient applications. In recent times, there has been significant interest in the magneto-ionic effect in synthetic antiferromagnets, primarily due to its strong potential in the realization of high-density storage devices with ultra-low power consumption. However, the underlying mechanism responsible for the magneto-ionic effect on the interlayer exchange coupling (IEC) remains elusive. In this study, we have successfully identified that the magneto-ionic control of the properties of the top ferromagnetic layer of the synthetic antiferromagnet (SyAFM), which is in contact with the high ion mobility oxide, plays a pivotal role in driving the observed gate-induced changes to the IEC. Our findings provide crucial insights into the intricate interplay between stack structure and magnetoionic-field effect on magnetic properties in synthetic antiferromagnetic thin film systems.

Permalloy, despite being a widely utilized soft magnetic material, still calls for optimization in terms of magnetic softness and magnetostriction for its use in magnetoresistive sensor applications. Conventional annealing methods are often insufficient to locally achieve the desired properties for a narrow parameter range. In this study, we report a significant improvement of the magnetic softness and magnetostriction in a 30 nm Permalloy film after He$^+$ irradiation. Compared to the as-deposited state, the irradiation treatment reduces the induced anisotropy by a factor ten and the hard axis coercivity by a factor five. In addition, the effective magnetostriction of the film is significantly reduced by a factor ten - below $1\times10^{-7}$ - after irradiation. All the above mentioned effects can be attributed to the isotropic crystallite growth of the Ni-Fe alloy and to the intermixing at the magnetic layer interfaces under light ion irradiation. We support our findings with X-ray diffraction analysis of the textured Ni$_{81}$Fe$_{19}$ alloy. Importantly, the sizable magnetoresistance is preserved after the irradiation. Our results show that compared to traditional annealing methods, the use of He$^+$ irradiation leads to significant improvements in the magnetic softness and reduces strain cross sensitivity in Permalloy films required for 3D positioning and compass applications. These improvements, in combination with the local nature of the irradiation process make our finding valuable for the optimization of monolithic integrated sensors, where classic annealing methods cannot be applied due to complex interplay within the components in the device.

This study reports the effects of post-growth He$^+$ irradiation on the magneto-elastic properties of a $Ni$ /$Fe$ multi-layered stack. The progressive intermixing caused by He$^+$ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He$^+$ fluences, and even to induce a reversal of the sign of the magnetostrictive effect. Additionally, the critical fluence at which the absolute value of the magnetostriction is dramatically reduced is identified. Therefore insensitivity to strain of the magnetic stack is nearly reached, as required for many applications. All the above mentioned effects are attributed to the combination of the negative saturation magnetostriction of sputtered Ni, Fe layers and the positive magnetostriction of the Ni$_{x}$Fe$_{1-x}$ alloy at the intermixed interfaces, whose contribution is gradually increased with irradiation. Importantly the irradiation does not alter the layers polycrystalline structure, confirming that post-growth He$^+$ ion irradiation is an excellent tool to tune the magneto-elastic properties of magnetic samples. A new class of spintronic devices can be envisioned with a material treatment able to arbitrarily change the magnetostriction with ion-induced "magnetic patterning".

Materials with significant spin-orbit coupling enable efficient spin-to-charge interconversion, which can be utilized in novel spin electronic devices. A number of elements, mainly heavy-metals (HM) have been identified to produce a sizable spin current ($j_\mathrm{s}$), while supplied with a charge current ($j$), detected mainly in the neighbouring ferromagnetic (FM) layer. Apart from the spin Hall angle $\theta_\mathrm{SH}$ = $j_\mathrm{s}$/$j$, spin Hall conductivity ($\sigma_\mathrm{SH}$) is an important parameter, which takes also the resistivity of the material into account. In this work, we present a measurement protocol of the HM/FM bilayers, which enables for a precise $\sigma_\mathrm{SH}$ determination. Static transport measurements, including resistivity and magnetization measurements are accompanied by the angular harmonic Hall voltage analysis in a dedicated low-noise rotating probe station. Dynamic characterization includes effective magnetization and magnetization damping measurement, which enable HM/FM interface absorption calculation. We validate the measurement protocol in Pt and Pt-Ti underlayers in contact with FeCoB and present the $\sigma_\mathrm{SH}$ of up to 3.3$\times$10$^5$ S/m, which exceeds the values typically measured in other HM, such as W or Ta., Comment: 7 pages, 5 figures, submitted to IEEE Transaction on Electron Devices

Ta/CoFeB/MgO trilayers with perpendicular magnetic anisotropy are often characterised by vanishing or modest values of interfacial Dzyaloshinskii-Moriya interaction (DMI), which results in purely Bloch or mixed Bloch-N\'eel domain walls (DWs). Here we investigate the creep evolution of the overall magnetic bubble morphology in these systems under the combined presence of in-plane and out-of-plane magnetic fields and we show that He$^+$ ion irradiation induces a transition of the internal DW structure towards a fully N\'eel spin texture. This transition can be correlated to a simultaneous increase in DMI strength and reduction in saturation magnetisation -- which are a direct consequence of the effects of ion irradiation on the bottom and top CoFeB interfaces, respectively. The threshold irradiation dose above which DWs acquire a pure N\'eel character is experimentally found to be between 12 $\times$ 10$^{18}$ He$^+$/m$^2$ and 16 $\times$ 10$^{18}$ He$^+$/m$^2$, matching estimations from the one dimensional DW model based on material parameters. Our results indicate that evaluating the global bubble shape during its expansion can be an effective tool to sense the internal bubble DW structure. Furthermore, we show that ion irradiation can be used to achieve post-growth engineering of a desired DW spin texture.

Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Here, we report spin transfer torque switching in nano-scale perpendicular magnetic tunnel junctions with a magnetoresistance ratio up to 249% and a resistance area product as low as 7.0 {\Omega}.{\mu}m2, which consists of atom-thick W layers and double MgO/CoFeB interfaces. The efficient resonant tunnelling transmission induced by the atom-thick W layers could contribute to the larger magnetoresistance ratio than conventional structures with Ta layers, in addition to the robustness of W layers against high temperature diffusion during annealing. The switching critical current density could be lower than 3.0 MA.cm-2 for devices with a 45 nm radius., Comment: 20 pages, 5 figures

We demonstrate ultra-fast (down to 400 ps) bipolar magnetization switching of a three-terminal perpendicular Ta/FeCoB/MgO/FeCoB magnetic tunnel junction. The critical current density rises significantly as the current pulse shortens below 10 ns, which translates into a minimum in the write energy in the ns range. Our results show that SOT-MRAM allows fast and low power write operations, which renders it promising for non-volatile cache memory applications., Comment: 15 pages, 3 figures

We explore the prospects of wafer scale inductive probing of the critical current density $j^{c0}$ for spin transfer torque switching of a CoFeB/MgO/CoFeB magnetic tunnel junction with varying MgO thickness. From inductive measurements magnetostatic parameters and the effective damping are derived and $j^{c0}$ is calculated based on spin transfer torque equations. The inductive values compare well to the values derived from current induced switching measurements on individual nanopillars. Using a wafer scale inductive probe head could in the future enable wafer probe station based metrology of $j^{c0}$.

Microwave detectors based on the spin-transfer torque diode effect are among the key emerging spintronic devices. By utilizing the spin of electrons in addition to charge, they have the potential to overcome the theoretical performance limits of their semiconductor (Schottky) counterparts, which cannot operate at low input power. Here, we demonstrate nanoscale microwave detectors exhibiting record-high detection sensitivity of 75400 mV mW$^{-1}$ at room temperature, without any external bias fields, for input microwave power down to 10 nW. This sensitivity is 20x and 6x larger than state-of-the-art Schottky diode detectors (3800 mV mW$^{-1}$) and existing spintronic diodes with >1000 Oe magnetic bias (12000 mV mW$^{-1}$), respectively. Micromagnetic simulations supported by microwave emission measurements reveal the essential role of the injection locking to achieve this sensitivity performance. The results enable dramatic improvements in the design of low input power microwave detectors, with wide-ranging applications in telecommunications, radars, and smart networks., Comment: 27 pages, 7 figures

We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and the read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density $5\times10^{11}$ A/m$^2$ in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof of concept of a perpendicular spin-orbit torque magnetic memory cell., Comment: 17 pages, 5 figures

We study the tunneling magneto thermopower and tunneling magneto thermocurrent of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ). The devices show a clear change of the thermoelectric properties upon reversal of the magnetisation of the CoFeB layers from parallel to the antiparallel orientation. When switching from parallel to antiparallel the thermopower increases by up to 55% where as the thermocurrent drops by 45%. These observations can be well explained by the Onsager relations taking into account the tunneling magneto resistance of the MTJ. These findings contrast previous studies on AlO based MTJ systems, revealing tunneling magneto thermo power but no tunneling magneto thermocurrent., Comment: 9 pages, 3 figures

The spin-transfer nano-oscillator (STNO) offers the possibility of using the transfer of spin angular momentum via spin-polarized currents to generate microwave signals. However, at present STNO microwave emission mainly relies on both large drive currents and external magnetic fields. These issues hinder the implementation of STNOs for practical applications in terms of power dissipation and size. Here, we report microwave measurements on STNOs built with MgO-based magnetic tunnel junctions having a planar polarizer and a perpendicular free layer, where microwave emission with large output power, excited at ultralow current densities, and in the absence of any bias magnetic fields is observed. The measured critical current density is over one order of magnitude smaller than previously reported. These results suggest the possibility of improved integration of STNOs with complementary metal-oxide-semiconductor technology, and could represent a new route for the development of the next-generation of on-chip oscillators., Comment: 18 pages, 4 figures

Stochastic dynamics of spin torque oscillators (STOs) can be described in terms of magnetization drift and diffusion over a current-dependent effective energy surface given by the Fokker-Planck equation. Here we present a method that directly probes this effective energy surface via time-resolved measurements of the microwave voltage generated by a STO. We show that the effective energy approach provides a simple recipe for predicting spectral line widths and line shapes near the generation threshold. Our time domain technique also accurately measures the field-like component of spin torque in a wide range of the voltage bias values., Comment: 5 pages, 3 figures. Supplement included: 7 pages, 6 figures

We demonstrate excitation of ferromagnetic resonance in CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) by the combined action of voltage-controlled magnetic anisotropy (VCMA) and spin transfer torque (ST). Our measurements reveal that GHz-frequency VCMA torque and ST in low-resistance MTJs have similar magnitudes, and thus that both torques are equally important for understanding high-frequency voltage-driven magnetization dynamics in MTJs. As an example, we show that VCMA can increase the sensitivity of an MTJ-based microwave signal detector to the sensitivity level of semiconductor Schottky diodes., Comment: 5 pages; supplementary material added