Search

Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency band. In this contribution, we focus on the uplink communications of massive cellular-connected UAVs. Different power allocation algorithms are proposed to either maximize the minimal spectrum efficiency (SE) or maximize the overall SE to cope with severe interference based on the successive convex approximation (SCA) principle. One of the challenges is that a UAV can affect a large area meaning that many more UAV-UEs must be considered in the optimization problem, which is essentially different from that for terrestrial UEs. The necessity of single-carrier uplink transmission further complicates the problem. Nevertheless, we find that the special property of large coherent bandwidths and coherent times of the propagation channels can be leveraged. The performances of the proposed algorithms are evaluated via extensive simulations in the full-buffer transmission mode and bursty-traffic mode. Results show that the proposed algorithms can effectively enhance the uplink SEs. This work can be considered the first attempt to deal with the interference among massive cellular-connected UAV-UEs with optimized power allocations., Comment: The final version can be found in IEEE Transactions on Vehicular Technology

Cellular-connected unmanned aerial vehicles (UAVs) have recently attracted a surge of interest in both academia and industry. Understanding the air-to-ground (A2G) propagation channels is essential to enable reliable and/or high-throughput communications for UAVs and protect the ground user equipments (UEs). In this contribution, a recently conducted measurement campaign for the A2G channels is introduced. A uniform circular array (UCA) with 16 antenna elements was employed to collect the downlink signals of two different Long Term Evolution (LTE) networks, at the heights of 0-40m in three different, namely rural, urban and industrial scenarios. The channel impulse responses (CIRs) have been extracted from the received data, and the spatial/angular parameters of the multipath components in individual channels were estimated according to a high-resolution-parameter estimation (HRPE) principle. Based on the HRPE results, clusters of multipath components were further identified. Finally, comprehensive spatial channel characteristics were investigated in the composite and cluster levels at different heights in the three scenarios., Comment: 17pages. This work has been accepted by IEEE JSAC

Dynamic time division duplexing (TDD) is one of the major novelties of the 5G new radio standard. It notably improves the network resource utilization with sporadic directional packet arrivals. Although, the feasibility of the ultra-reliable and low-latency communications (URLLC) within such deployments is critically challenged, mainly due to the cross-link interference (CLI). In this work, we propose a semi-static and computationally-efficient TDD radio frame adaptation algorithm for 5G macro deployments. Particularly, we first identify the quasi-static variance of the cross-cell traffic buffering performance, with various CLI co-existence conditions. Accordingly, a common radio frame pattern is dynamically estimated based on the filtered multi-cell traffic statistics. Our system-level simulation results show that the proposed solution achieves a highly improved URLLC outage performance, i.e., offering 40% reduction gain of the achievable URLLC outage latency compared to perfect static-TDD, and approaching the optimal interference-free flexible-TDD case; though, with a significantly lower control overhead size.

The fifth generation (5G) mobile technology features the ultra-reliable and low-latency communications (URLLC) as a major service class. URLLC applications demand a tight radio latency with extreme link reliability. In 5G dynamic time division duplexing (TDD) systems, URLLC requirements become further challenging to achieve due to the severe and fast-varying cross link interference (CLI) and the switching time of the radio frame configurations (RFCs). In this work, we propose a quasi-dynamic inter-cell frame coordination algorithm using hybrid frame design and a cyclic-offset-based RFC code-book. The proposed solution adaptively updates the RFCs in time such that both the average CLI and the user-centric radio latency are minimized. Compared to state-of-the-art dynamic TDD studies, the proposed scheme shows a significant improvement in the URLLC outage latency, i.e., 92% reduction gain, while boosting the cell-edge capacity by 189% and with a greatly reduced coordination overhead space, limited to B-bit.