Search

Learning how to safely handle Plasma-Material Interaction (PMI) is a key challenge towards the commercialisation of energy from nuclear fusion. In this respect, linear plasma devices are ideal experimental testbeds, and numerical codes play a crucial complementary role. In this paper, a numerical investigation of PMI-relevant helium plasma experimental discharges in GyM linear device is presented, in which SOLPS-ITER and ERO2.0 codes are coupled for plasma background generation and material erosion investigation respectively, with the aim to support the interpretation and complement the available experimental dataset. On the plasma side, simulated profiles are validated against experimental data to provide a realistic plasma background, and the role of He metastable states is assessed for the first time in SOLPS simulations. On the material side, the erosion and deposition effects due to the introduction of the sample-holder in the simulation volume are investigated, now considering also the real stainless steel composition as wall material.

Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($\lambda/\Delta\lambda$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers., Comment: 16 pages, 8 Figures, accepted for publication in Optics Express

L-mode negative triangularity (NT) operation is a promising alternative to the positive triangularity (PT) H-mode as a high-confinement ELM-free operational regime. In this work, two TCV L-mode lower single null Ohmic discharges with opposite triangularity $\delta \simeq \pm 0.3$ are investigated using SOLPS-ITER modelling. The main focus is the exploration of the reasons behind the experimentally observed feature of NT plasmas being more difficult to detach than similar PT experiments. SOLPS-ITER simulations are performed assuming the same anomalous diffusivity for particles $D_n^{AN}$ and energy $\kappa_{e/i}^{AN}$ in PT and NT. Nonetheless, the results clearly show dissimilar transport and accumulation of neutral particles in the scrape-off layer (SOL) of the two configurations, which consequently gives rise to different ionization sources for the plasma and produces different poloidal and cross-field fluxes. Simulations also recover the experimental feature of the outer target being hotter in the NT scenario (with $T_{e, NT} \gtrsim 5 \, \mathrm{eV}$) than in the PT counterpart., Comment: 18 pages, 8 figures

Laser-driven radiation sources are attracting increasing attention for several materials science applications. While laser-driven ions, electrons and neutrons have already been considered to carry out the elemental characterization of materials, the possibility to exploit high energy photons remains unexplored. Indeed, the electrons generated by the interaction of an ultra-intense laser pulse with a near-critical material can be turned into high energy photons via bremsstrahlung emission when shot into a high-Z converter. These photons could be effectively exploited to perform Photon Activation Analysis (PAA). In the present work, the possibility to perform laser-driven PAA is proposed and investigated. By means of a theoretical and numerical approach, we identify the optimal near-critical material and converter parameters for laser-driven PAA in a wide range of laser intensities. Finally, exploiting the Monte Carlo and Particle-In-Cell tools, we simulate PAA experiments performed with both conventional accelerators and laser-driven sources.

We report on an investigation on the properties of ultra-low density, fractal, Carbon nanofoams fabricated with the nanosecond and femtosecond pulsed-laser deposition (PLD) techniques. We measure through innovative techniques the foam mean density and the properties of the fractal aggregates composing the film (i.e. nanoparticles diameter, fractal dimension, and gyration radius) as a function of several PLD process parameters, namely the background gas pressure and the laser pulse characteristics (energy, time duration, repetition rate). We discuss the experimental observation on the basis of the existing literature, and we propose an analytical equation, based on the fractal scaling law, to predict the foam density from the aggregates properties. Finally, we use analytical arguments to explain the observed trends in the nanofoam density with respect to the process parameters, useful to gain new insights on the nanofoam growth and to guide experimental work in fabricating ultra-low density films with precisely controlled properties., Comment: The publication was flawed with some technical errors which invalidate the main results and conclusions

Titanium (Ti), due to its excellent properties, is widely exploited in thin film technology that usually leads to the production of {\alpha}-phase (hcp) Ti films. In this work, we investigate the phase evolution of Ti films deposited by varying type and energy of the film-forming species. To investigate different plasma species environments, films with different thicknesses are grown by using conventional Direct Current Magnetron Sputtering (DCMS) and High Power Impulse Magnetron Sputtering (HiPIMS). Furthermore, HiPIMS depositions with different substrate bias voltage US (0 V, -300 V and -500 V) are performed to investigate different ion energy ranges. Microstructure, morphology and residual stress of the deposited films, as well as the DCMS and HiPIMS plasma composition, are analysed with different characterization techniques. The DCMS samples exhibit the Ti {\alpha}-phase only and show a tensile residual stress decreasing with thickness. As far as HiPIMS samples are concerned, a compressive-tensile-compressive (CTC) behavior is observed for residual stresses as thickness increases. Specifically, films deposited in low energy ion conditions (US =0 V) show the presence of the Ti fcc phase up to a maximum thickness of about 370 nm. Differently, films deposited under high energy conditions (US = -300 V and -500 V) show the nucleation of the Ti {\omega}-phase for thicknesses greater than 260 and 330 nm, respectively. The formation of these unusual Ti phases is discussed considering the different deposition conditions., Comment: This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (ENSURE grant agreement No. 647554)

Among the existing elemental characterization techniques, Particle Induced X-ray Emission (PIXE) and Energy Dispersive X-ray (EDX) spectroscopy are two of the most widely used in different scientific and technological fields. Here we present the first quantitative laser-driven PIXE and laser-driven EDX experimental investigation performed at the Centro de L\'aseres Pulsados in Salamanca. Thanks to their potential for compactness and portability, laser-driven particle sources are very appealing for materials science applications, especially for materials analysis techniques. We demonstrate the possibility to exploit the X-ray signal produced by the co-irradiation with both electrons and protons to identify the elements in the sample. We show that, using the proton beam only, we can successfully obtain quantitative information about the sample structure through laser-driven PIXE analysis. These results pave the way towards the development of a compact and multi-functional apparatus for the elemental analysis of materials based on a laser-driven particle source., Comment: This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (ENSURE grant agreement No. 647554). Submitted to Science Advances on 20th May 20

Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, porous) and nanoparticles and investigate the influence of their morphology on the measured Raman spectra. The amounts of oxygen and/or nitrogen in the films are also investigated. Comparative data are obtained by X-ray Photoelectrons Spectroscopy, Atomic Force Microscopy, Electron Microscopies (Scanning and Transmission), Energy Dispersive X-ray spectroscopy, Time-of-Flight Elastic Recoil Detection Analysis. The power density of the laser beam used to perform Raman microscopy is varied by up to 4 orders of magnitude (0.01-20 mW/$\mu$m 2) to investigate thermal stability of films and nanoparticles. As a first result, we give evidence that Raman microscopy is sensitive enough to detect surface native oxides. Secondly, more tungsten oxides are detected in porous materials and nanoparticles than in compact films, and the intensities of the Raman band correlate to their oxygen content. Thirdly, thermal stability of these films (i.e. structural and chemical modification under laser heating) is poor when compact films contain a sufficiently large amount of nitrogen. This finding suggests that nitrogen can be substituted by oxygen during Raman laser induced heating occurring in ambient air. Finally, our methodology can be used to rapidly characterize morphology and chemistry of the samples analyzed, and also to create oxides at the micrometer scale. keywords: PLD, Raman spectroscopy, tungsten oxide, tungsten nitride, plasma wall interaction, laser heating, post-mortem analysis 2, Comment: Nuclear Fusion, IOP Publishing, 2020

The polarization- and angle- resolved optical response of the anapole mode in silicon nano-disks array have been experimentally and theoretically investigated. The good agreement betweenmeasured data and simulations yields to a consistent description of the anapole mode behaviorthat exhibits different features for TE or TM polarization excitation. Scattering matrix calculationallows us to disentangle scattered and diffused light contributions and to provide a quantitativeestimation of the absorbance enhancement associated to 2D excitation of the anapole mode. Weperformed the multipolar decomposition of the far-field scattered radiation for both TE and TMpolarizations and unambiguously identified the anapole resonant condition in excellent agreementwith the experimental results over a large range of incident angles. Our findings demonstrate thecontrolled excitation of electromagnetic anapole modes in engineered arrays of silicon nano-disksfor the development of optical nanostructures with enhanced light-matter interaction, Comment: 10 pages, 4 figures and 1 table, submitted to Phys.Rev.B

Ion beam analysis techniques are among the most powerful tools for advanced material characterization. Despite their growing relevance in a widening number of fields, most ion beam analysis facilities still rely on the oldest accelerator technologies, with severe limitations in terms of portability and flexibility. In this work we thoroughly address the potential of superintense laser-driven proton sources for this application. We develop a complete analytical and numerical framework suitable to describe laser-driven ion beam analysis, exemplifying the approach for Proton Induced X-ray/Gamma-ray emission, a technique of widespread interest. This allows us to propose a realistic design for a compact, versatile ion beam analysis facility based on this novel concept. These results can pave the way for ground-breaking developments in the field of hadron-based advanced material characterization., Comment: 12 pages, 5 figures. Submitted to Scientific Reports on 26th April 18. First decision received on 27th September 18. Revised version submitted on 18th October 18

In this paper we report the development of a new method for the evaluation of thin films mass thickness and composition based on the Energy Dispersive X-Ray Spectroscopy (EDS). The method exploits the theoretical calculation of the in-depth characteristic X-ray generation distribution function, $\phi$/($\rho$ z), in multilayer samples, obtained by the numerical solution of the electron transport equation, to achieve reliable measurements without the need of a reference sample and multiple voltages acquisitions. The electron transport model is derived from the Boltzmann transport equation and it exploits the most updated and reliable physical parameters in order to obtain an accurate description of the phenomenon. The method for the calculation of film mass thickness and composition is validated with benchmarks from standard techniques. In addition, a model uncertainty and sensitivity analysis is carried out and it indicates that the mass thickness accuracy is in the order of 10 $\mu$g/cm$^2$, which is comparable to the nuclear standard techniques resolution. We show the technique peculiarities in one example measurement: two-dimensional mass thickness and composition profiles are obtained for a ultra-low density, high roughness, nanostructured film., Comment: This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (ENSURE grant agreement No. 647554)

W-O deposits with complex morphologies and significant He contents will growth on the surface of plasma facing components exposed to He discharges. To mimic the re/co-deposition process, W-O-He coatings were produced by implanting He+ ions on W films grown by pulsed laser deposition (PLD). The use of appropriate PLD experimental parameters such as Ar or He background atmospheres induces the deposition of porous or amorphous-like W-O structures, respectively. After multiple ion implantation stages using 150 keV, 100 keV and 50 keV incident He+ ion beams with a total fluence of 5 x 1017 ion/cm^2, significant amounts of He were identified in porous coatings by Rutherford backscattering (RBS). Time-of-flight elastic recoil detection (TOF-ERDA) measurements showed that most of the implanted He was already released from the porous coatings five month after implantation while for the case of amorphous ones the He content remains significant at deeper layers and smoothly decrease towards the surface, as result of a different morphology and nanostructure. The proposed method involving PLD and ion implantation seems adequate to produce W-O-He reference samples for fusion investigations., Comment: This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement n. 633053

Hybrid organic-inorganic perovskites have emerged as very promising materials for photonic applications, thanks to the great synthetic versatility that allows to tune their optical properties. In the two-dimensional (2D) crystalline form, these materials behave as multiple quantum-well heterostructures with stable excitonic resonances up to room temperature. In this work strong light-matter coupling in 2D perovskite single-crystal flakes is observed, and the polarization-dependent exciton-polariton response is used to disclose new excitonic features. For the first time, an out-of-plane component of the excitons is observed, unexpected for such 2D systems and completely absent in other layered materials, such as transition-metal dichalcogenides. By comparing different hybrid perovskites with the same inorganic layer but different organic interlayers, it is shown how the nature of the organic ligands controllably affects the out-of-plane exciton-photon coupling. Such vertical dipole coupling is particularly sought in those systems, e.g. plasmonic nanocavities, in which the direction of the field is usually orthogonal to the material sheet. Organic interlayers are shown to affect also the strong birefringence associated to the layered structure, which is exploited in this work to completely rotate the linear polarization degree in only few microns of propagation, akin to what happens in metamaterials., Comment: 11 pages, 14 figures (included supporting info)

In this work, we investigate the correlation between morphology, composition, and the mechanical properties of metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films deposited by Pulsed Laser Deposition. This correlation is investigated by the combined use of Brillouin Spectroscopy and the substrate curvature method. The stiffness of the films is strongly affected by both the oxygen content and the mass density. The elastic moduli show a decreasing trend as the mass density decreases and the oxygen-tungsten ratio increases. A plateaux region is detected in correspondence of the transition between metallic and oxide films. The compressive residual stresses, moderate stiffness and high local ductility that characterize compact amorphous tungsten-oxide films make them promising for applications involving thermal or mechanical loads. The coefficient of thermal expansion is quite high (i.e. 8.9 $\cdot$ 10$^{-6}$ K$^{-1}$), being strictly correlated to the amorphous structure and stoichiometry of the films. Under thermal treatments they show a quite low relaxation temperature (i.e. 450 K). They crystallize into the $\gamma$ monoclinic phase of WO$_3$ starting from 670 K, inducing an increase by about 70\% of material stiffness., Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554). The views and opinions expressed herein do not necessarily reflect those of the European Commission

Laser interaction with uniform and nanostructured near-critical plasmas has been investigated by means of 2D particle-in-cell simulations. The effect of a nanostructure (modeled as a collection of solid-density nanospheres) on energy absorption and radiative losses has been assessed in a wide range of laser intensities and average densities of the target. The nanostructure was found to affect mainly the conversion efficiency of laser energy into ion kinetic energy and radiative losses for the highest simulated intensities., Comment: The research leading to these results has received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554)

The in plane coefficient of thermal expansion (CTE) and the residual stress of nanostructured W based coatings are extensively investigated. The CTE and the residual stresses are derived by means of an optimized ad-hoc developed experimental setup based on the detection of the substrate curvature by a laser system. The nanostructured coatings are deposited by Pulsed Laser Deposition. Thanks to its versatility, nanocrystalline W metallic coatings, ultra-nano-crystalline pure W and W-Tantalum coatings and amorphous-like W coatings are obtained. The correlation between the nanostructure, the residual stress and the CTE of the coatings are thus elucidated. We find that all the samples show a compressive state of stress that decreases as the structure goes from columnar nanocrystalline to amorphous-like. The CTE of all the coatings is higher than the one of the corresponding bulk W form. In particular, as the grain size shrinks, the CTE increases from 5.1 10$^{-6}$ K$^{-1}$ for nanocrystalline W to 6.6 10$^{-6}$ K$^{-1}$ in the ultra-nano-crystalline region. When dealing with amorphous W, the further increase of the CTE is attributed to a higher porosity degree of the samples. The CTE trend is also investigated as function of materials stiffness. In this case, as W coatings become softer, the easier they thermally expand., Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554)

Pulsed Laser Deposition allows to obtain W and W-Ta alloy coatings with different nanostructures, monitored by X-ray diffraction. The correlation between such structures and the elastic properties is investigated for amorphous-like, ultra-nano- and nano-crystalline coatings obtained by tuning the gas pressure during deposition, annealing temperature and Ta concentration. The full elastic characterization is achieved by surface Brillouin spectroscopy, interpreted by isotropic and anisotropic film models. Amorphous like coatings are obtained with He pressures of tens of Pa. In comparison with bulk W, they have lower stiffness, by about 60\%, closely correlated to the mass density (lower by about 40\%). In the nanocrystalline regime the stiffness is more correlated to the average grain size, approaching the bulk values for increasing crystallite size. Vacuum annealing of amorphous like coatings leads to the nucleation of ultra-nano crystalline seeds, embedded in an amorphous matrix with intermediate values for mass density and stiffness. Here, the stiffness results from an interplay between the crystal size and the density. Alloying with Ta leads to properties which are consistent with the lever rule in the nanocrystalline regime, and deviate from it when the higher Ta concentration, interfering with crystal growth, induces an ultra-nano crystalline structure., Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554)

Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at base pressures of 10$^{-4}$ - 10$^{-3}$ Pa. A detailed structural analysis, by X-Ray Diffraction and Raman, allowed to assess the amorphous nature of the deposited films as well as to determine the base pressure that prevents boron oxide formation. In addition the crystallization dynamics has been characterized showing that film crystallinity already improves at relatively low temperatures (800 {\deg}C). Elastic properties of the boron films have been determined by Brillouin spectroscopy. Finally, micro-hardness tests have been used to explore cohesion and hardness of B films deposited on aluminum, silicon and alumina. The reported deposition strategy allows the growth of reliable boron coatings paving the way for their use in many technology fields., Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554)

We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiO\sub{x} phases were identified: the \emph{honeycomb} and \emph{pinwheel} phases appear as monolayer films wetting the gold surface, while nanocrystallites of the \emph{triangular}, \emph{row} and \emph{needle} phases grow mainly over the honeycomb or pinwheel layers. Density Functional Theory (DFT) investigation of the honeycomb structure supports a $(2\times 2)$ structural model based on a Ti-O bilayer having $\text{Ti}_2\text{O}_3$ stoichiometry. The pinwheel phase was observed to evolve, for increasing coverage, from single triangular crystallites to a well-ordered film forming a $(4\sqrt{7}\times 4\sqrt{7})R19.1^\circ$ superstructure, which can be interpreted within a moir\~A\c{opyright}-like model. Structural characteristics of the other three phases were disclosed from the analysis of high-resolution STM measurements. STS measurements revealed a partial metallization of honeycomb and pinwheel and a semiconducting character of row and triangular phases., Comment: 13 pages, 10 figures

The generation of energetic electron bunches by the interaction of a short, ultra-intense ($I>10^{19} \textrm{W/cm}^2$) laser pulse with "grating" targets has been investigated in a regime of ultra-high pulse-to-prepulse contrast ($10^{12}$). For incidence angles close to the resonant condition for Surface Plasmon (SP) excitation, a strong electron emission was observed within a narrow cone along the target surface, with energies exceeding 10 MeV. Both the energy and the number of emitted electrons were strongly enhanced with respect to simple flat targets. The experimental data are closely reproduced by three-dimensional particle-in-cell simulations, which provide evidence for the generation of relativistic SPs and for their role in driving the acceleration process. Besides the possible applications of the scheme as a compact, ultra-short source of MeV electrons, these results are a step forward the development of high field plasmonics.

Tunable, battery free light emission is demonstrated in a solid state device that is compatible with lab on a chip technology and easily fabricated via solution processing techniques. A porous one dimensional (1D) photonic crystal (also called Bragg stack or mirror) is infiltrated by chemiluminescence rubrene-based reagents. The Bragg mirror has been designed to have the photonic band gap overlapping with the emission spectrum of rubrene. The chemiluminescence reaction occurs in the intrapores of the photonic crystal and the emission spectrum of the dye is modulated according to the photonic band gap position. This is a compact, powerless emitting source that can be exploited in disposable photonic chip for sensing and point of care applications., Comment: 8 pages, 3 figures

The characterization of dynamic phenomena using laser speckle has been studied in several applications and many descriptors have been developed to analyze the resulting images. In this work we compare the performance of a set of dynamic speckle descriptors by applying them to carefully controlled numerical simulations in order to explore their linearity, robustness, sensitivity related to the samples quantity, as well as also by their computing time. Results are shown as plots together with discussions about the corresponding advantages and shortcomings. Also the robustness to inhomogeneous spatial intensity was evaluated in an experiment performed with the illuminated surface of an actual biological object Keywords: biospeckle, dynamic speckle simulation, statistical descriptors, frequency descriptors, temporal descriptors

This paper proposes the design of decision models based on Computational Intelligence techniques applied to image sequences of dynamic laser speckle. These models aim to identify image regions of biological specimens illuminated by a coherent beam coming from a laser. The field image is pseudo colored using a Self Organizing Map projection. This process is carried out using a set of descriptors applied to the intensity variations along time in every pixel of an image sequence. The models use descriptors selected to improve effectiveness, depending on the specific application. We present two examples of the application of the proposed techniques to assess biological tissues. The results obtained are encouraging and significantly improve those obtained using a single descriptor.

The interaction of laser pulses with thin grating targets, having a periodic groove at the irradiated surface, has been experimentally investigated. Ultrahigh contrast ($\sim 10^{12}$) pulses allowed to demonstrate an enhanced laser-target coupling for the first time in the relativistic regime of ultra-high intensity $>10^{19} \mbox{W/cm}^{2}$. A maximum increase by a factor of 2.5 of the cut-off energy of protons produced by Target Normal Sheath Acceleration has been observed with respect to plane targets, around the incidence angle expected for resonant excitation of surface waves. A significant enhancement is also observed for small angles of incidence, out of resonance., Comment: 5 pages, 5 figures, 2nd version implements final corrections

A short overview of laser-plasma acceleration of ions is presented. The focus is on some recent experimental results and related theoretical work on advanced regimes. These latter include in particular target normal sheath acceleration using ultrashort low-energy pulses and structured targets, radiation pressure acceleration of both thick and ultrathin targets, and collisionless shock acceleration in moderate density plasmas. For each approach, open issues and the need and potential for further developments are briefly discussed., Comment: Invited paper from plenary talk at the 40th European Physical Society Conference on Plasma Physics (Espoo, Finland, July 1-5, 2013). To be submitted to Plasma Physics and Controlled Fusion (special EPS issue). 4 figures. 2nd version implements corrections

Ion acceleration driven by superintense laser pulses is attracting an impressive and steadily increasing effort. Motivations can be found in the potential for a number of foreseen applications and in the perspective to investigate novel regimes as far as available laser intensities will be increasing. Experiments have demonstrated in a wide range of laser and target parameters the generation of multi-MeV proton and ion beams with unique properties such as ultrashort duration, high brilliance and low emittance. In this paper we give an overview of the state-of-the art of ion acceleration by laser pulses as well as an outlook on its future development and perspectives. We describe the main features observed in the experiments, the observed scaling with laser and plasma parameters and the main models used both to interpret experimental data and to suggest new research directions., Comment: 58 pages, 36 figures, accepted for publication on Reviews of Modern Physics (2013)

During May 2012, the CERN-CNGS neutrino beam has been operated for two weeks for a total of 1.8 10^17 pot in bunched mode, with a 3 ns narrow width proton beam bunches, separated by 100 ns. This tightly bunched beam structure allows a very accurate time of flight measurement of neutrinos from CERN to LNGS on an event-by-event basis. Both the ICARUS-T600 PMT-DAQ and the CERN-LNGS timing synchronization have been substantially improved for this campaign, taking ad-vantage of additional independent GPS receivers, both at CERN and LNGS as well as of the deployment of the "White Rabbit" protocol both at CERN and LNGS. The ICARUS-T600 detector has collected 25 beam-associated events; the corresponding time of flight has been accurately evaluated, using all different time synchronization paths. The measured neutrino time of flight is compatible with the arrival of all events with speed equivalent to the one of light: the difference between the expected value based on the speed of light and the measured value is tof_c - tof_nu = (0.10 \pm 0.67stat. \pm 2.39syst.) ns. This result is in agreement with the value previously reported by the ICARUS collaboration, tof_c - tof_nu = (0.3 \pm 4.9stat. \pm 9.0syst.) ns, but with improved statistical and systematic errors., Comment: 21 pages, 13 figures, 1 table

We investigate by particle-in-cell simulations in two and three dimensions the laser-plasma interaction and the proton acceleration in multilayer targets where a low density "near-critical" layer of a few micron thickness is added on the illuminated side of a thin, high density layer. This target design can be obtained by depositing a "foam" layer on a thin metallic foil. The presence of the near-critical plasma strongly increases both the conversion efficiency and the energy of electrons and leads to enhanced acceleration of proton from a rear side layer via the Target Normal Sheath Acceleration mechanism. The electrons of the foam are strongly accelerated in the forward direction and propagate on the rear side of the target building up a high electric field with a relatively flat longitudinal profile. In these conditions the maximum proton energy is up to three times higher than in the case of the bare solid target., Comment: 9 pages, 11 figures. Submitted to Physical Review E

The formation mechanisms of evaporated Pd islands on the reconstructed Au(111) $22 /times /sqrt{3}$ herringbone surface have been here studied by Scanning Tunneling Microscopy (STM) at room temperature. Atomically resolved STM images at the very early stages of growth provide a direct observation of the mechanisms involved in preferential Pd islands nucleation at the elbows of the herringbone structure. At low Pd coverage the Au(111) herringbone structure remains substantially unperturbed and isolated Pd atoms settled in hollow sites between Au atoms are found nearby the elbows and the distortions of the reconstructed surface. In the same regions, at extremely low coverage (0.003 ML), substituted Pd atoms in lattice sites of the Au(111) surface are also observed, revealing the occurrence of a place exchange mechanism. Substitution seems to play a fundamental role in the nucleation process, forming aggregation centers for incoming atoms and thus leading to the ordered growth of Pd islands on Au(111). Atomically resolved STM images of Pd islands reveal a close-packed arrangement with lattice parameter close to the interatomic distance between gold atoms in the fcc regions of the Au(111) surface. Distortion of the herringbone structure for Pd coverages higher than 0.25 ML indicates strong interaction between the growing islands and the topmost Au(111) layer., Comment: 25 pages, 10 figures

A simple, reliable method for preparation of bulk Cr tips for Scanning Tunneling Microscopy (STM) is proposed and its potentialities in performing high-quality and high-resolution STM and Spin Polarized-STM (SP-STM) are investigated. Cr tips show atomic resolution on ordered surfaces. Contrary to what happens with conventional W tips, rest atoms of the Si(111)-7x7 reconstruction can be routinely observed, probably due to a different electronic structure of the tip apex. SP-STM measurements of the Cr(001) surface showing magnetic contrast are reported. Our results reveal that the peculiar properties of these tips can be suited in a number of STM experimental situations.

We report on how different cluster deposition regimes can be obtained and observed by in situ Scanning Tunneling Microscopy (STM) by exploiting deposition parameters in a pulsed laser deposition (PLD) process. Tungsten clusters were produced by nanosecond Pulsed Laser Ablation in Ar atmosphere at different pressures and deposited on Au(111) and HOPG surfaces. Deposition regimes including cluster deposition-diffusion-aggregation (DDA), cluster melting and coalescence and cluster implantation were observed, depending on background gas pressure and target-to-substrate distance which influence the kinetic energy of the ablated species. These parameters can thus be easily employed for surface modification by cluster bombardment, deposition of supported clusters and growth of films with different morphologies. The variation in cluster mobility on different substrates and its influence on aggregation and growth mechanisms has also been investigated., Comment: 12 pages (3 figures); Surface Science (accepted)