Search

Due to their energy-efficient flight characteristics, fixed-wing type UAVs are useful robotic tools for long-range and duration flight applications in large-scale environments. However, flying fixed-wing UAV in confined environments, such as mountainous regions, can be challenging due to their limited maneuverability and sensitivity to uncertain wind conditions. In this work, we first analyze periodic trochoidal paths that can be used to define wind-aware terminal loitering states. We then propose a wind-invariant safe set of trochoidal paths along with a switching strategy for selecting the corresponding minimum-extent periodic path type. Finally, we show that planning with this minimum-extent set allows us to safely reach up to 10 times more locations in mountainous terrain compared to planning with a single, conservative loitering maneuver., Comment: 7 pages, 9 figures

ALICE records Pb-Pb collisions in Run 3 at an unprecedented rate of 50 kHz, storing all data in continuous readout (triggerless) mode. The main purpose of the ALICE online computing farm is the calibration of the detectors and the compression of the recorded data. The detector with the largest data volume by far is the TPC, and the online farm is thus optimized for fast and efficient processing of TPC data during data taking. For this, ALICE leverages heavily the compute power of GPUs. When there is no beam in the LHC, the GPU-equipped farm performs the offline reconstruction of the recorded data, in addition to the GRID. Since the majority of the compute capacity of the farm is in the GPUs, and meanwhile also some GRID sites begin to offer GPU resources, ALICE has started to offload other parts of the offline reconstruction to GPUs as well. The talk will present the experience and processing performance with GPUs in the Run 3 Pb-Pb and pp online and offline processing in ALICE., Comment: 6 pages, 2 figures, Proceedings of ICHEP 2024

Due to the increase of data volumes expected for the LHC Run 3 and Run 4, the ALICE Collaboration designed and deployed a new, energy efficient, computing model to run Online and Offline O$^2$ data processing within a single software framework. The ALICE O$^2$ Event Processing Nodes (EPN) project performs online data reconstruction using GPUs (Graphic Processing Units) instead of CPUs and applies an efficient, entropy-based, online data compression to cope with PbPb collision data at a 50 kHz hadronic interaction rate. Also, the O$^2$ EPN farm infrastructure features an energy efficient, environmentally friendly, adiabatic cooling system which allows for operational and capital cost savings.

ALICE has upgraded many of its detectors for LHC Run 3 to operate in continuous readout mode recording Pb--Pb collisions at 50 kHz interaction rate without trigger. This results in the need to process data in real time at rates 100 times higher than during Run 2. In order to tackle such a challenge we introduced O2, a new computing system and the associated infrastructure. Designed and implemented during the LHC long shutdown 2, O2 is now in production taking care of all the data processing needs of the experiment. O2 is designed around the message passing paradigm, enabling resilient, parallel data processing for both the synchronous (to LHC beam) and asynchronous data taking and processing phases. The main purpose of the synchronous online reconstruction is detector calibration and raw data compression. This synchronous processing is dominated by the TPC detector, which produces by far the largest data volume, and TPC reconstruction runs fully on GPUs. When there is no beam in the LHC, the powerful GPU-equipped online computing farm of ALICE is used for the asynchronous reconstruction, which creates the final reconstructed output for analysis from the compressed raw data. Since the majority of the compute performance of the online farm is in the GPUs, and since the asynchronous processing is not dominated by the TPC in the way the synchronous processing is, there is an ongoing effort to offload a significant amount of compute load from other detectors to the GPU as well., Comment: 12 pages, 4 figures, Proceedings of CHEP 2023

The ALICE experiment has undergone a major upgrade for LHC Run 3 and will collect data at an interaction rate 50 times larger than before. The new computing scheme for Run 3 replaces the traditionally separate online and offline frameworks by a unified one, which is called O2. Processing will happen in two phases. During data taking, a synchronous processing phase performs data compression, calibration, and quality control on the online computing farm. The output is stored on an onsite disk buffer. When there is no beam in the LHC, the same computing farm is used for the asynchronous reprocessing of the data which yields the final reconstruction output. The O2 project consists of three main parts:. The Event Processing Nodes (EPN) equipped with GPUs deliver the bulk of the computing capacity and perform the majority of the reconstruction and the calibration. The First Level Processors (FLP) receive the data via optical links from the detectors and perform local processing where it is needed, which can optionally happen in the user logic of the FPGA based readout card. Between the FLP and the EPN farms the data is distributed in the network such that the EPNs receive complete collision data for the processing. The Physics and Data Processing (PDP) group develops the software framework and the reconstruction and calibration algorithms. The current O2 setup is capable of handling in real time the peak data rate foreseen for data taking of Pb--Pb collisions at 50 kHz interaction rate.., Comment: Proceedings of VCI 2022 Conference

ALICE will significantly increase its Pb--Pb data taking rate from the 1\,kHz of triggered readout in Run 2 to 50 kHz of continuous readout for LHC Run 3. Updated tracking detectors are installed for Run 3 and a new two-phase computing strategy is employed. In the first synchronous phase during the data taking, the raw data is compressed for storage to an on-site disk buffer and the required data for the detector calibration is collected. In the second asynchronous phase the compressed raw data is reprocessed using the final calibration to produce the final reconstruction output. Traditional CPUs are unable to cope with the huge data rate and processing demands of the synchronous phase, therefore ALICE employs GPUs to speed up the processing. Since the online computing farm performs a part of the asynchronous processing when there is no beam in the LHC, ALICE plans to use the GPUs also for this second phase. This paper gives an overview of the GPU processing in the synchronous phase, the full system test to validate the reference GPU architecture, and the prospects for the GPU usage in the asynchronous phase., Comment: 11 pages, 8 figures, proceedings for vCHEP 2021

ALICE will increase the data-taking rate for Run 3 significantly to 50 kHz continuous readout of minimum bias Pb--Pb collisions. The foreseen reconstruction strategy consists of 2 phases: a first synchronous online reconstruction stage during data-taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The main challenges include processing and compression of 50 times more events per second than in Run 2, sophisticated compression and removal of TPC data not use for physics, tracking of TPC data in continuous readout, the TPC space-charge distortion calibrations, and in general running more reconstruction steps online compared to Run 2. ALICE will leverage GPUs to facilitate the synchronous processing with the available resources. In order to achieve the best utilization of the computing farm, we plan to offload also several steps of the asynchronous reconstruction to the GPU. This paper gives an overview of the important processing steps during synchronous and asynchronous reconstruction and of the required computing capabilities., Comment: 4 pages, 2 figures, proceedings of LHCP2020

In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous readout of minimum bias Pb--Pb collisions. The reconstruction strategy of the online-offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The main challenges include processing and compression of 50 times more events per second than in Run 2, identification of removable TPC tracks and hits not used for physics, tracking of TPC data in continuous readout, the TPC space-charge distortion calibrations, and in general running more reconstruction steps online compared to Run 2. ALICE will leverage GPUs to facilitate the synchronous processing with the available resources. For the best GPU resource utilization, we plan to offload also several steps of the asynchronous reconstruction to the GPU. In order to be vendor independent, we support CUDA, OpenCL, and HIP, and we maintain a common C++ source code that also runs on the CPU. We will give an overview of the global reconstruction and tracking strategy, a comparison of the performance on CPU and different GPU models. We will discuss the scaling of the reconstruction with the input data size, as well as estimates of the required resources in terms of memory and processing power., Comment: 8 pages, 3 figures, proceedings of Connecting the Dots 2020 Workshop

In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous read out of minimum bias Pb-Pb collisions. The reconstruction strategy of the online offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The significant increase in the data rate poses challenges for online and offline reconstruction as well as for data compression. Compared to Run 2, the online farm must process 50 times more events per second and achieve a higher data compression factor. ALICE will rely on GPUs to perform real time processing and data compression of the Time Projection Chamber (TPC) detector in real time, the biggest contributor to the data rate. With GPUs available in the online farm, we are evaluating their usage also for the full tracking chain during the asynchronous reconstruction for the silicon Inner Tracking System (ITS) and Transition Radiation Detector (TRD). The software is written in a generic way, such that it can also run on processors on the WLCG with the same reconstruction output. We give an overview of the status and the current performance of the reconstruction and the data compression implementations on the GPU for the TPC and for the global reconstruction., Comment: 7 pages, 4 figures, proceedings of CHEP 2019 conference

We present a hierarchical whole-body controller leveraging the full rigid body dynamics of the wheeled bipedal robot Ascento. We derive closed-form expressions for the dynamics of its kinematic loops in a way that readily generalizes to more complex systems. The rolling constraint is incorporated using a compact analytic solution based on rotation matrices. The non-minimum phase balancing dynamics are accounted for by including a linear-quadratic regulator as a motion task. Robustness when driving curves is increased by regulating the lean angle as a function of the zero-moment point. The proposed controller is computationally lightweight and significantly extends the rough-terrain capabilities and robustness of the system, as we demonstrate in several experiments., Comment: 8 pages, 10 figures, RA-L/ICRA 2020

In LHC Run 3, ALICE will increase the data taking rate significantly, from an approximately 1 kHz trigger readout in minimum-bias Pb--Pb collisions to a 50 kHz continuous readout rate. The reconstruction strategy of the online-offline computing upgrade foresees a synchronous online reconstruction stage during data taking, which generates the detector calibration, and a posterior calibrated asynchronous reconstruction stage. The huge amount of data requires a significant compression in order to store all recorded events. The aim is a factor 20 compression of the TPC data, which is one of the main challenges during synchronous reconstruction. In addition, the reconstruction will run online, processing 50 times more collisions than at present, yielding results comparable to current offline reconstruction. These requirements pose new challenges for the tracking, including the continuous TPC readout, more overlapping collisions, no a priori knowledge of the primary vertex position and of location-dependent calibration during the synchronous phase, identification of low-momentum looping tracks, and a distorted refit to improve track model entropy coding. At the 2018 workshop, the TPC tracking for Run 3 was presented, which matches the physics performance of the Run 2 offline tracking. It leverages the potential of hardware accelerators via the OpenCL and CUDA APIs in a shared source code for CPUs and GPUs for both reconstruction stages. Porting more reconstruction steps like the remainder of the TPC reconstruction and tracking for other detectors to GPU will shift the computing balance from traditional processors towards GPUs. These proceedings focus on the global tracking strategy, including the ITS and TRD detectors, offloading more reconstruction steps onto GPU, and the approaches taken to achieve the necessary data compression., Comment: 8 pages, 7 figures, proceedings to Connecting the Dots 2019 conference

In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous read-out of minimum bias Pb-Pb collisions. The reconstruction strategy of the online-offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration and data compression, and a posterior calibrated asynchronous reconstruction stage. Many new challenges arise, among them continuous TPC read-out, more overlapping collisions, no a priori knowledge of the primary vertex and of location-dependent calibration in the synchronous phase, identification of low-momentum looping tracks, and sophisticated raw data compression. The tracking algorithm for the Time Projection Chamber (TPC) will be based on a Cellular Automaton and the Kalman filter. The reconstruction shall run online, processing 50 times more collisions per second than today, while yielding results comparable to current offline reconstruction. Our TPC track finding leverages the potential of hardware accelerators via the OpenCL and CUDA APIs in a shared source code for CPUs and GPUs for both reconstruction stages. We give an overview of the status of Run 3 tracking including performance on processors and GPUs and achieved compression ratios., Comment: 8 pages, 7 figures, contribution to CHEP 2018 conference

This paper presents the mathematical modeling, controller design, and flight-testing of an over-actuated Vertical Take-off and Landing (VTOL) tiltwing Unmanned Aerial Vehicle (UAV). Based on simplified aerodynamics and first-principles, a dynamical model of the UAV is developed which captures key aerodynamic effects including propeller slipstream on the wing and post-stall characteristics of the airfoils. The model-based steady-state flight envelope and the corresponding trim-actuation is analyzed and the overactuation of the UAV solved by optimizing for, e.g., power-optimal trims. The developed control system is composed of two controllers: First, a low-level attitude controller based on dynamic inversion and a daisy-chaining approach to handle allocation of redundant actuators. Secondly, a higher-level cruise controller to track a desired vertical velocity. It is based on a linearization of the system and look-up tables to determine the strong and nonlinear variation of the trims throughout the flight-envelope. We demonstrate the performance of the control-system for all flight phases (hover, transition, cruise) in extensive flight-tests., Comment: 8 pages

In LHC Run 3, ALICE will increase the data taking rate significantly to continuous readout of 50 kHz minimum bias Pb-Pb collisions. The reconstruction strategy of the online offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. We present a tracking algorithm for the Time Projection Chamber (TPC), the main tracking detector of ALICE. The reconstruction must yield results comparable to current offline reconstruction and meet the time constraints like in the current High Level Trigger (HLT), processing 50 times as many collisions per second as today. It is derived from the current online tracking in the HLT, which is based on a Cellular automaton and the Kalman filter, and we integrate missing features from offline tracking for improved resolution. The continuous TPC readout and overlapping collisions pose new challenges: conversion to spatial coordinates and the application of time- and location dependent calibration must happen in between of track seeding and track fitting while the TPC occupancy increases five-fold. The huge data volume requires a data reduction factor of 20, which imposes additional requirements: the momentum range must be extended to identify low-pt looping tracks and a special refit in uncalibrated coordinates improves the track model entropy encoding. Our TPC track finding leverages the potential of hardware accelerators via the OpenCL and CUDA APIs in a shared source code for CPUs, GPUs, and both reconstruction stages. Porting more reconstruction steps like the remainder of the TPC reconstruction and tracking for other detectors will shift the computing balance from traditional processors to GPUs., Comment: 13 pages, 10 figures, proceedings to Connecting The Dots Workshop, Seattle, 2018

In the upcoming upgrades for Run 3 and 4, the LHC will significantly increase Pb--Pb and pp interaction rates. This goes along with upgrades of all experiments, ALICE, ATLAS, CMS, and LHCb, related to both the detectors and the computing. The online processing farms must employ faster, more efficient reconstruction algorithms to cope with the increased data rates, and data compression factors must increase to fit the data in the affordable capacity for permanent storage. Due to different operating conditions and aims, the experiments follow different approaches, but there are several common trends like more extensive online computing and the adoption of hardware accelerators. This paper gives an overview and compares the data processing approaches and the online computing farms of the LHC experiments today in Run 2 and for the upcoming LHC Run 3 and 4., Comment: 6 pages, 0 figures, contribution to LHCP2018 conference

The L-CSC (Lattice Computer for Scientific Computing) is a general purpose compute cluster built with commodity hardware installed at GSI. Its main operational purpose is Lattice QCD (LQCD) calculations for physics simulations. Quantum Chromo Dynamics (QCD) is the physical theory describing the strong force, one of the four known fundamental interactions in the universe. L-CSC leverages a multi-GPU design accommodating the huge demand of LQCD for memory bandwidth. In recent years, heterogeneous clusters with accelerators such as GPUs have become more and more powerful while supercomputers in general have shown enormous increases in power consumption making electricity costs and cooling a significant factor in the total cost of ownership. Using mainly GPUs for processing, L-CSC is very power-efficient, and its architecture was optimized to provide the greatest possible power efficiency. This paper presents the cluster design as well as optimizations to improve the power efficiency. It examines the power measurements performed for the Green500 list of the most power-efficient supercomputers in the world which led to the number 1 position as the greenest supercomputer in November 2014., Comment: 7 pages, 2 figures

ALICE (A Large Ion Collider Experiment) is one of four major experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is a compute cluster, which reconstructs collisions as recorded by the ALICE detector in real-time. It employs a custom online data-transport framework to distribute data and workload among the compute nodes. ALICE employs subdetectors sensitive to environmental conditions such as pressure and temperature, e.g. the Time Projection Chamber (TPC). A precise reconstruction of particle trajectories requires the calibration of these detectors. Performing the calibration in real time in the HLT improves the online reconstructions and renders certain offline calibration steps obsolete speeding up offline physics analysis. For LHC Run 3, starting in 2020 when data reduction will rely on reconstructed data, online calibration becomes a necessity. Reconstructed particle trajectories build the basis for the calibration making a fast online-tracking mandatory. The main detectors used for this purpose are the TPC and ITS (Inner Tracking System). Reconstructing the trajectories in the TPC is the most compute-intense step. We present several improvements to the ALICE High Level Trigger developed to facilitate online calibration. The main new development for online calibration is a wrapper that can run ALICE offline analysis and calibration tasks inside the HLT. On top of that, we have added asynchronous processing capabilities to support long-running calibration tasks in the HLT framework, which runs event-synchronously otherwise. In order to improve the resiliency, an isolated process performs the asynchronous operations such that even a fatal error does not disturb data taking. We have complemented the original loop-free HLT chain with ZeroMQ data-transfer components. [...], Comment: 8 pages, 10 figures, proceedings to 2016 IEEE-NPSS Real Time Conference

ALICE (A Large Heavy Ion Experiment) is one of the four major experiments at the Large Hadron Collider (LHC) at CERN, which is today the most powerful particle accelerator worldwide. The High Level Trigger (HLT) is an online compute farm of about 200 nodes, which reconstructs events measured by the ALICE detector in real-time. The HLT uses a custom online data-transport framework to distribute data and workload among the compute nodes. ALICE employs several calibration-sensitive subdetectors, e.g. the TPC (Time Projection Chamber). For a precise reconstruction, the HLT has to perform the calibration online. Online-calibration can make certain Offline calibration steps obsolete and can thus speed up Offline analysis. Looking forward to ALICE Run III starting in 2020, online calibration becomes a necessity. The main detector used for track reconstruction is the TPC. Reconstructing the trajectories in the TPC is the most compute-intense step during event reconstruction. Therefore, a fast tracking implementation is of great importance. Reconstructed TPC tracks build the basis for the calibration making a fast online-tracking mandatory. We present several components developed for the ALICE High Level Trigger to perform fast event reconstruction and to provide features required for online calibration. As first topic, we present our TPC tracker, which employs GPUs to speed up the processing, and which bases on a Cellular Automaton and on the Kalman filter. Our TPC tracking algorithm has been successfully used in 2011 and 2012 in the lead-lead and the proton-lead runs. We have improved it to leverage features of newer GPUs and we have ported it to support OpenCL, CUDA, and CPUs with a single common source code. This makes us vendor independent. As second topic, we present framework extensions required for online calibration. ..., Comment: 8 pages, 6 figures, contribution to CHEP 2015 conference

ALICE (A Large Heavy Ion Experiment) is one of the four large scale experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is an online computing farm, which reconstructs events recorded by the ALICE detector in real-time. The most compute-intense task is the reconstruction of the particle trajectories. The main tracking devices in ALICE are the Time Projection Chamber (TPC) and the Inner Tracking System (ITS). The HLT uses a fast GPU-accelerated algorithm for the TPC tracking based on the Cellular Automaton principle and the Kalman filter. ALICE employs gaseous subdetectors which are sensitive to environmental conditions such as ambient pressure and temperature and the TPC is one of these. A precise reconstruction of particle trajectories requires the calibration of these detectors. As first topic, we present some recent optimizations to our GPU-based TPC tracking using the new GPU models we employ for the ongoing and upcoming data taking period at LHC. We also show our new approach for fast ITS standalone tracking. As second topic, we present improvements to the HLT for facilitating online reconstruction including a new flat data model and a new data flow chain. The calibration output is fed back to the reconstruction components of the HLT via a feedback loop. We conclude with an analysis of a first online calibration test under real conditions during the Pb-Pb run in November 2015, which was based on these new features., Comment: 13 pages, 7 figures, proceedings to Connecting The Dots Workshop, Vienna, 2016

ALICE (A Large Heavy Ion Experiment) is one of the four major experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is an online compute farm which reconstructs events measured by the ALICE detector in real-time. The most compute-intensive part is the reconstruction of particle trajectories called tracking and the most important detector for tracking is the Time Projection Chamber (TPC). The HLT uses a GPU-accelerated algorithm for TPC tracking that is based on the Cellular Automaton principle and on the Kalman filter. The GPU tracking has been running in 24/7 operation since 2012 in LHC Run 1 and 2. In order to better leverage the potential of the GPUs, and speed up the overall HLT reconstruction, we plan to bring more reconstruction steps (e.g. the tracking for other detectors) onto the GPUs. There are several tasks running so far on the CPU that could benefit from cooperation with the tracking, which is hardly feasible at the moment due to the delay of the PCI Express transfers. Moving more steps onto the GPU, and processing them on the GPU at once, will reduce PCI Express transfers and free up CPU resources. On top of that, modern GPUs and GPU programming APIs provide new features which are not yet exploited by the TPC tracking. We present our new developments for GPU reconstruction, both with a focus on the online reconstruction on GPU for the online offline computing upgrade in ALICE during LHC Run 3, and also taking into account how the current HLT in Run 2 can profit from these improvements., Comment: 8 pages, 7 figures, contribution to CHEP 2016 conference

The ALICE HLT uses a data transport framework based on the publisher-subscriber message principle, which transparently handles the communication between processing components over the network and between processing components on the same node via shared memory with a zero copy approach. We present an analysis of the performance in terms of maximum achievable data rates and event rates as well as processing capabilities during Run 1 and Run 2. Based on this analysis, we present new optimizations we have developed for ALICE in Run 2. These include support for asynchronous transport via Zero-MQ which enables loops in the reconstruction chain graph and which is used to ship QA histograms to DQM. We have added asynchronous processing capabilities in order to support long-running tasks besides the event-synchronous reconstruction tasks in normal HLT operation. These asynchronous components run in an isolated process such that the HLT as a whole is resilient even to fatal errors in these asynchronous components. In this way, we can ensure that new developments cannot break data taking. On top of that, we have tuned the processing chain to cope with the higher event and data rates expected from the new TPC readout electronics (RCU2) and we have improved the configuration procedure and the startup time in order to increase the time where ALICE can take physics data. We analyze the maximum achievable data processing rates taking into account processing capabilities of CPUs and GPUs, buffer sizes, network bandwidth, the incoming links from the detectors, and the outgoing links to data acquisition., Comment: 8 pages, 6 figures, contribution to CHEP 2016 conference

The online event reconstruction for the ALICE experiment at CERN requires processing capabilities to process central Pb-Pb collisions at a rate of more than 200 Hz, corresponding to an input data rate of about 25 GB/s. The reconstruction of particle trajectories in the Time Projection Chamber (TPC) is the most compute intensive step. The TPC online tracker implementation combines the principle of the cellular automaton and the Kalman filter. It has been accelerated by the usage of graphics cards (GPUs). A pipelined processing allows to perform the tracking on the GPU, the data transfer, and the preprocessing on the CPU in parallel. In order for CPU pre- and postprocessing to keep step with the GPU the pipeline uses multiple threads. A splitting of the tracking in multiple phases searching for short local track segments first improves data locality and makes the algorithm suited to run on a GPU. Due to special optimizations this course of action is not second to a global approach. Because of non-associative floating-point arithmetic a binary comparison of GPU and CPU tracker is infeasible. A track by track and cluster by cluster comparison shows a concordance of 99.999%. With current hardware, the GPU tracker outperforms the CPU version by about a factor of three leaving the processor still available for other tasks., Comment: 8 pages, 12 figures, contribution to CHEP2012 conference

In LHC Run 3, ALICE will increase the data taking rate significantly to 50\,kHz continuous read out of minimum bias Pb-Pb events. This challenges the online and offline computing infrastructure, requiring to process 50 times as many events per second as in Run 2, and increasing the data compression ratio from 5 to 20. Such high data compression is impossible by lossless ZIP-like algorithms, but it must use results from online reconstruction, which in turn requires online calibration. These important online processing steps are the most computing-intense ones, and will use GPUs as hardware accelerators. The new online features are already under test during Run 2 in the High Level Trigger (HLT) online processing farm. The TPC (Time Projection Chamber) tracking algorithm for Run 3 is derived from the current HLT online tracking and is based on the Cellular Automaton and Kalman Filter. HLT has deployed online calibration for the TPC drift time, which needs to be extended to space charge distortions calibration. This requires online reconstruction for additional detectors like TRD (Transition Radiation Detector) and TOF (Time Of Flight). We present prototypes of these developments, in particular a data compression algorithm that achieves a compression factor of~9 on Run 2 TPC data, and the efficiency of online TRD tracking. We give an outlook to the challenges of TPC tracking with continuous read out., Comment: 6 pages, 8 figures, contribution to LHCP2017 conference

In cryo-electron microscopy (EM), molecular structures are determined from large numbers of projection images of individual particles. To harness the full power of this single-molecule information, we use the Bayesian inference of EM (BioEM) formalism. By ranking structural models using posterior probabilities calculated for individual images, BioEM in principle addresses the challenge of working with highly dynamic or heterogeneous systems not easily handled in traditional EM reconstruction. However, the calculation of these posteriors for large numbers of particles and models is computationally demanding. Here we present highly parallelized, GPU-accelerated computer software that performs this task efficiently. Our flexible formulation employs CUDA, OpenMP, and MPI parallelization combined with both CPU and GPU computing. The resulting BioEM software scales nearly ideally both on pure CPU and on CPU+GPU architectures, thus enabling Bayesian analysis of tens of thousands of images in a reasonable time. The general mathematical framework and robust algorithms are not limited to cryo-electron microscopy but can be generalized for electron tomography and other imaging experiments.