Search

We have numerically studied a mean-field fiber bundle model of fracture at a non-zero temperature and acted by a constant external tensile stress. The individual fibers fail (local damage) due to creep-like dynamics that lead up to a catastrophic breakdown (global failure). We quantify the variations in sizes of the resulting avalanches by calculating the Lorenz function and two inequality indices -- Gini ($g$) and Kolkata ($k$) indices -- derived from the Lorenz function. We show that the two indices cross just prior to the failure point when the dynamics goes through intermittent avalanches. For a continuous failure dynamics (finite numbers of fibers breaking at each time step), the crossing does not happen. However, in that phase, the usual prediction method i.e., linear relation between the time of minimum strain-rate and failure time, holds. The boundary between continuous and intermittent dynamics is very close to the boundary between crossing and non-crossing of the two indices in the temperature-stress phase space., Comment: 5 figures, 6 pages

Through controlled numerical simulations in a one dimensional fiber bundle model with local stress concentration, we established an inverse correlation between the strength of the material and the cracks which grow inside it - both the maximum crack and the one that set in instability within the system, defined to be the critical crack. Through Pearson correlation function as well as probabilistic study of individual configurations, we found that the maximum and the critical crack often differ from each other unless the disorder strength is extremely low. A phase diagram on the plane of disorder vs system size demarcates between the regions where the largest crack is the most vulnerable one and where they differ from each other but still shows moderate correlation., Comment: 7 pages, 7 figures

The immiscible displacement of a fluid by another one inside a porous medium produces different types of patterns depending on the capillary number Ca and viscosity ratio M. At high Ca, viscous fingers resulting from the viscous instability between fluid-fluid interfaces are believed to exhibit the same Laplacian growth behavior as viscously-unstable fingers observed in Hele-Shaw cells by Saffman and Taylor [1], or as diffusion limited aggregates (DLA) [2]. I.e., the interface velocity depends linearly on the local gradient of the physical field that drives the growth process (for two-phase flow, the pressure field). However, steady-state two-phase flow in porous media is known to exhibit a regime for which the flow rate depends as a non-linear power law on the global pressure drop, due to the disorder in the capillary barriers at pore throats. A similar nonlinear growth regime was also evidenced experimentally for viscously-unstable drainage in two-dimensional porous media 20 years ago [3]. Here we revisit this flow regime using dynamic pore-network modeling, and explore the non-linearity in the growth properties. We characterize the previously-unstudied dependencies of the statistical finger width and nonlinear growth law's exponent on Ca, and discuss quantitatively, based on theoretical arguments, how disorder in the capillary barriers controls the growth process' non-linearity, and why the flow regime crosses over to Laplacian growth at sufficiently high Ca. In addition, the statistical properties of the fingering patterns are compared to those of Saffman-Taylor fingers, DLA growth patterns, and the results from the aforementioned previous experimental study., Comment: 18 pages, 13 figures

We study the role of record statistics of damage avalanches in predicting the fracture of a heterogeneous material under tensile loading. The material is modeled using a two-dimensional random spring network where disorder is introduced through randomness in the breakage threshold strains of the springs. It is shown that the waiting time between successive records of avalanches has a maximum for moderate disorder, thus showing an acceleration of records with impending fracture. Such a signature is absent for low disorder strength when the fracture is nucleation-dominated, and high disorder strength when the fracture is percolation type. We examine the correlation between the record with the maximum waiting time and the crossover record at which the avalanche statistics change from off-critical to critical. Compared to the avalanche based predictor for failure, we show that the record statistics have the advantage of both being real-time as well as able to predict final fracture at much smaller strains. We also show that in the avalanche-dominated regime, the failure strain is shown to have a linear relation with the strain at the maximum waiting time, making possible a quantitative prediction., Comment: 9 pages, 7 figures

While the design of blind image quality assessment (IQA) algorithms has improved significantly, the distribution shift between the training and testing scenarios often leads to a poor performance of these methods at inference time. This motivates the study of test time adaptation (TTA) techniques to improve their performance at inference time. Existing auxiliary tasks and loss functions used for TTA may not be relevant for quality-aware adaptation of the pre-trained model. In this work, we introduce two novel quality-relevant auxiliary tasks at the batch and sample levels to enable TTA for blind IQA. In particular, we introduce a group contrastive loss at the batch level and a relative rank loss at the sample level to make the model quality aware and adapt to the target data. Our experiments reveal that even using a small batch of images from the test distribution helps achieve significant improvement in performance by updating the batch normalization statistics of the source model., Comment: Accepted to ICCV 2023

The multiplicity dependence of event-by-event fluctuations in mean transverse momentum, $\langle p_{\rm T} \rangle$, of charged particles has been studied in p$-$p collisions at $\sqrt{s}$ = 7 TeV and 13 TeV using the PYTHIA 8 event generator. The charged particles were selected in kinematic range of $0.15 < p_{\rm T}<2$ GeV$/c$ and $|\eta| < 0.8$. The dynamical fluctuations would indicate towards the correlated emission of particles. The measurements in A$-$A and p$-$p collisions has shown a decrease in the strength of $ \langle p_{\rm T} \rangle$ fluctuations with the average charged particle multiplicity. The effects of various microscopic processes like color reconnection and multi-partonic interactions has been studied. A minimal dependency on the collision energy is also observed. Furthermore, the fluctuation observables are investigated in the intervals of transverse spherocity in order to comprehend the relative contributions resulting from hard scattering and underlying events. The present study would act as a baseline for future measurements in A$-$A as well as p$-$p collisions at the LHC., Comment: 8 pages, 16 figures

The article reports a numerical investigation of the breakdown of a disordered system considering the effect of local stress concentration under the action of an external tensile force. The statistics of the record-breaking magnitudes of emitted energies during the failure process, as well as the waiting time to achieve those record events, show rich behavior. The latter includes information about the acceleration and subsequent catastrophic failure through its non-monotonic behavior. The maximum waiting time is also correlated with the maximum change in elastic energy as the model evolves, a different way of predicting an upcoming failure, which is consistent with our hypothesis as well. At a moderate disorder, such a prediction can be done with higher accuracy while at a low disorder, due to the abrupt nature of the failure process our hypothesis does not hold well., Comment: 4 figures, 9 pages

Various kinds of heterogeneity in solids including atomistic discreteness affect the fracture strength as well as the failure dynamics remarkably. Here we study the effects of an initial crack in a discrete model for fracture in heterogeneous materials, known as the fiber bundle model. We find three distinct regimes for fracture dynamics depending on the initial crack size. If the initial crack is smaller than a certain value, it does not affect the rupture dynamics and the critical stress. While for a larger initial crack, the growth of the crack leads to a breakdown of the entire system, and the critical stress depends on the crack size in a power-law manner with a nontrivial exponent. The exponent, as well as the limiting crack size, depend on the strength of heterogeneity and the range of stress relaxation in the system., Comment: 12 pages, 6 figures

We study here the dynamics of opinion formation in a society where we take into account of the internally held beliefs and externally expressed opinions of the individuals, which are not necessarily the same at all times. While these two components can influence one another, their difference, both in dynamics and in the steady state, poses interesting scenarios in terms of the transition to consensus in the society and characterizations of such consensus. Here we study this public and private opinion dynamics and the critical behavior of the consensus forming transitions, using a kinetic exchange model., Comment: 13 pages, 9 figures, accepted for publication in Phil. Trans. R. Soc. A

We present a continuum (i.e., an effective) description of immiscible two-phase flow in porous media characterized by two fields, the pressure and the saturation. Gradients in these two fields are the driving forces that move the immiscible fluids around. The fluids are characterized by two seepage velocity fields, one for each fluid. Following Hansen et al.\ (Transport in Porous Media, 125, 565 (2018)), we construct a two-way transformation between the velocity couple consisting of the seepage velocity of each fluid, to a velocity couple consisting of the average seepage velocity of both fluids and a new velocity parameter, the co-moving velocity. The co-moving velocity is related but not equal to velocity difference between the two immiscible fluids. The two-way mapping, the mass conservation equation and the constitutive equations for the average seepage velocity and the co-moving velocity form a closed set of equations that determine the flow. There is growing experimental, computational and theoretical evidence that constitutive equation for the average seepage velocity has the form of a power law in the pressure gradient over a wide range of capillary numbers. Through the transformation between the two velocity couples, this constitutive equation may be taken directly into account in the equations describing the flow of each fluid. This is e.g., not possible using relative permeability theory. By reverse engineering relative permeability data from the literature, we construct the constitutive equation for the co-moving velocity. We also calculate the co-moving constitutive equation using a dynamic pore network model over a wide range of parameters, from where the flow is viscosity dominated to where the capillary and viscous forces compete., Comment: 29 pages, 18 figures

We observe the failure process of a fiber bundle model with a variable stress release range, $\gamma$, higher the value of $\gamma$ lower the stress release range. By tuning $\gamma$ from low to high, it is possible to go from the mean-field (MF) limit of the model to local load sharing (LLS) where local stress concentration plays a crucial role. In the MF limit, the avalanche size $s$ and energy $E$ emitted during the avalanche are highly correlated producing the same distribution for both $P(s)$ and $Q(E)$: a scale-free distribution with a universal exponent -5/2. With increasing $\gamma$, the model enters the LLS limit. In this limit, due to the presence of local stress concentration such correlation $C(\gamma)$ between $s$ and $E$ decreases where the nature of the decreases depends highly on the dimension of the bundle. In 1d, the $C(\gamma)$ stars from a high value for low $\gamma$ and decreases towards zero when $\gamma$ is increased. As a result, $Q(E)$ and $P(s)$ are similar at low $\gamma$, an exponential one, and then $Q(E)$ becomes power-law for high-stress release range though $P(s)$ remains exponential. On the other hand, in 2d, the $C(\gamma)$ decreases slightly with $\gamma$ but remains at a high value. Due to such a high correlation, the distribution of both $s$ and $E$ is exponential in the LLS limit independent of how large $\gamma$ is., Comment: 10 pages, 5 figures

A phase diagram for a one-dimensional fiber bundle model is constructed with a continuous variation in two parameters guiding the dynamics of the model: strength of disorder and range of stress relaxation. When the range of stress relaxation is very low, the stress concentration plays a prominent role and the failure process is nucleating where a single crack propagates from a particular nucleus with a very high spatial correlation unless the disorder strength is high. On the other hand, a high range of stress relaxation represents the mean-field limit of the model where the failure events are random in space. At an intermediate disorder strength and stress release range, when these two parameters compete, the failure process shows avalanches and precursor activities. As the size of the bundle is increased, it favors a nucleating failure. In the thermodynamic limit, we only observe a nucleating failure unless either the disorder strength is extremely high or the stress release range is high enough so that the model is in the mean-field limit. A complex phase diagram on the plane of disorder strength, stress release range, and system size is presented showing different failure modes - (I) nucleation, (II) avalanche, and (III) percolation, depending on the spatial correlation observed during the failure process., Comment: 16 pages, 10 figures. arXiv admin note: substantial text overlap with arXiv:2107.09979

A phase diagram for a one dimensional fiber bundle model is constructed with a continuous variation in two parameters guiding dynamics of the model: strength of disorder and system size. We monitor the successive events of fiber rupture in order to understand the spatial correlation associated with it. We observe three distinct regions with increasing disorder strength. (I) Nucleation - a crack propagates from a particular nucleus with very high spatial correlation and causes global failure; (II) Avalanche - the rupture events show precursors activities with a number of bursts. (III) Percolation - the rupture events are spatially uncorrelated like a percolation process. As the size of the bundle is increased, it favors the nucleating failure. In the thermodynamic limit, we only observe a nucleating failure unless the disorder strength is infinitely high., Comment: I have combined this paper with another one and the whole manuscript is uploaded in Arxiv separately titled "From nucleation to percolation: the effect of system size when disorder and stress localization compete"

Immiscible two-phase flow in porous media with mixed wet conditions was examined using a capillary fiber bundle model, which is analytically solvable, and a dynamic pore network model. The mixed wettability was implemented in the models by allowing each tube or link to have a different wetting angle chosen randomly from a given distribution. Both models showed that mixed wettability can have significant influence on the rheology in terms of the dependence of the global volumetric flow rate on the global pressure drop. In the capillary fiber bundle model, for small pressure drops when only a small fraction of the tubes were open, it was found that the volumetric flow rate depended on the excess pressure drop as a power law with an exponent equal to 3/2 or 2 depending on the minimum pressure drop necessary for flow. When all the tubes were open due to a high pressure drop, the volumetric flow rate depended linearly on the pressure drop, independent of the wettability. In the transition region in between where most of the tubes opened, the volumetric flow depended more sensitively on the wetting angle distribution function and was in general not a simple power law. The dynamic pore network model results also showed a linear dependence of the flow rate on the pressure drop when the pressure drop is large. However, out of this limit the dynamic pore network model demonstrated a more complicated behaviour that depended on the mixed wettability condition and the saturation. In particular, the exponent relating volumetric flow rate to the excess pressure drop could take on values anywhere between 1.0 and 1.8. The values of the exponent were highest for saturations approaching 0.5, also, the exponent generally increased when the difference in wettability of the two fluids were larger and when this difference was present for a larger fraction of the porous network., Comment: 23 pages, 9 figures

The flow of immiscible fluids inside a porous medium shows non-linearity in the form of a power law in the rheological properties of the fluids under steady state flow conditions. However, different experimental and numerical studies have reported different values for the exponent related to this power law. Here we explore how the rheological properties of the two-phase flow in porous media depends on the distribution of the pore sizes and how it affects the power-law exponent. The pore-size distribution controls fluctuation in the pore radii and their density in a porous material. We present two approaches, analytical calculations using a capillary bundle model and numerical simulations using dynamic pore-network modeling. We observe crossover from a non-linear to linear rheology when increasing the flow rate where the non-linear part is highly affected by the pore-size distribution. We have also carried out the study for different saturations of the two fluids., Comment: 15 pages, 6 figures

To understand the general properties of creep failure with healing effects, we study a mean-field fiber bundle model with probabilistic rupture and rejoining processes. The dynamics of the model are determined by two factors: bond breaking and the formation of new bonds. Steady states are realized due to the balance between breaking and healing beyond a critical healing factor, below which the bundle breaks completely. Correlation between the fluctuating value of strain generated in the model with time at the steady-state leads to a characteristic time that diverges in a scale-free manner as we approach the critical healing factor. Transient behaviors in strain rate also involve a power law with a non-universal exponent., Comment: 6 pages, 7 figures

We study the local load sharing fiber bundle model and its energy burst statistics. While it is known that the avalanche size distribution of the model is exponential, we numerically show here that the avalanche size ($s$) and the corresponding energy burst ($E$) in this version of the model have a non-linear relation ($E\sim s^{\gamma}$). Numerical results indicate that $\gamma\approx 2.5$ universally for different failure threshold distributions. With this numerical observation, it is then possible to show that the energy burst distribution is a power law, with a universal exponent value of $-(\gamma+1)$., Comment: 7 pages, 7 figures

We study the competition between thermal fluctuations and stress enhancement in the failure process of a disordered system by using a local load sharing fiber bundle model. The thermal noise is introduced by defining a failure probability that constitutes the temperature and elastic energy of the fibers. We observe that at a finite temperature and low disorder strength, the failure process, which nucleate in the absence of any thermal fluctuation, becomes spatially uncorrelated when the applied stress is sufficiently low. The dynamics of the model in this limit lies closely to the universality class of ordinary percolation. When applied stress is increased beyond a threshold value, localized fractures appear in the system that grow with time. We identify the boundary between the localized and random failure process in the space of temperature and applied stress, and find that the threshold of stress corresponding to the onset of localized crack growth increases with the increase of temperature., Comment: 11 pages, 8 figures

We study the effect of the competition between disorder and stress enhancement in fracture processes using the local load sharing fiber bundle model, a model that hovers on the border between analytical tractability and numerical accessibility. We implement a disorder distribution with one adjustable parameter. The model undergoes a localization transition as a function of this parameter. We identify an order parameter for this transition and find that the system is in the localized phase over a finite range of values of the parameter bounded by a transition to the non-localized phase on both sides. The transition is first order at the lower transition and second order at the upper transition. The critical exponents characterizing the second order transition are close to those characterizing the percolation transition. We determine the spatiotemporal correlation function in the localized phase. It is characterized by two power laws as in invasion percolation. We find exponents that are consistent with the values found in that problem., Comment: 8 pages, 5 figures

It is becoming increasingly clear that there is a regime in immiscible two-phase flow in porous media where the flow rate depends of the pressure drop as a power law with exponent different than one. This occurs when the capillary forces and viscous forces both influence the flow. At higher flow rates, where the viscous forces dominate, the flow rate depends linearly on the pressure drop. The question we pose here is what happens to the linear regime when the system size is increased. Based on analytical calculations using the capillary fiber bundle model and on numerical simulations using a dynamical network model, we find that the non-linear regime moves towards smaller and smaller pressure gradients as the system size grows., Comment: 10 pages, 6 figures

We present a theoretical framework for immiscible incompressible two-phase flow in homogeneous porous media that connects the distribution of local fluid velocities to the average seepage velocities. By dividing the pore area along a cross-section transversal to the average flow direction up into differential areas associated with the local flow velocities, we construct a distribution function that allows us not only to re-establish existing relationships between the seepage velocities of the immiscible fluids, but also to find new relations between their higher moments. We support and demonstrate the formalism through numerical simulations using a dynamic pore-network model for immiscible two-phase flow with two- and three-dimensional pore networks. Our numerical results are in agreement with the theoretical considerations., Comment: 12 pages, 5 figures

Creep is a time-dependent deformation of solids at relatively low stresses, leading to the breakdown with time. Here we propose a simple model for creep failure of disordered solids, in which temperature and stress are controllable. Despite its simplicity, this model can reproduce most experimental observations. Time dependence of the strain rate is well fitted with power laws resembling the Omori-Utsu and the inverse Omori laws in the primary and the tertiary creep regimes, respectively. Distribution of the creep lifetime obeys the log-normal distribution, and the average creep lifetime decays in a scale-free manner with the increasing stress. The above results are in good agreement with experiments. Additionally, the mean avalanche size as a function of temperature exhibits a series of jumps, and finite-size scaling implies the existence of phase transitions., Comment: 9 pages, 9 figures

We investigate the effective rheology of two-phase flow in a bundle of parallel capillary tubes carrying two immiscible fluids under an external pressure drop. The diameter of each tube varies along its length and the corresponding capillary threshold pressures are considered to be distributed randomly according to a uniform probability distribution. We demonstrate through analytical calculations that a transition from a linear Darcy regime to a non-linear behavior occurs while decreasing the pressure drop $\Delta P$, where the total flow rate $\langle Q \rangle$ varies with $\Delta P$ with an exponent $2$. This exponent for the non-linear regime changes when a lower cut-off $P_m$ is introduced in the threshold distribution. We demonstrate analytically that, in the limit where $\Delta P$ approaches $P_m$, the flow rate scales as $\langle Q \rangle \sim (|\Delta P|-P_m)^{3/2}$. We have also provided some numerical results in support to our analytical findings., Comment: 6 pages, 2 figures

The present work deals with the behavior of fiber bundle model under heterogeneous loading condition. The model is explored both in the mean-field limit as well as with local stress concentration. In the mean field limit, the failure abruptness decreases with increasing order k of heterogeneous loading. In this limit, a brittle to quasi-brittle transition is observed at a particular strength of disorder which changes with k. On the other hand, the model is hardly affected by such heterogeneity in the limit where local stress concentration plays a crucial role. The continuous limit of the heterogeneous loading is also studied and discussed in this paper. Some of the important results related to fiber bundle model are reviewed and their responses to our new scheme of heterogeneous loading are studied in details. Our findings are universal with respect to the nature of the threshold distribution adopted to assign strength to an individual fiber., Comment: 16 pages, 16 figures

In this paper I have studied the fiber bundle model with a fraction {\alpha} of infinitely strong fibers. Inclusion of such unbreakable fraction has been proven to affect the failure process in early studies, especially around a critical value {\alpha}_c . The present work has a twofold purpose: (i) study of failure abruptness, mainly the brittle to quasi-brittle transition point ({\delta}_c ) with varying {\alpha} and (ii) variation of {\alpha}_c as we change the disorder introduced in the model. The brittle to quasi-brittle transition is confirmed from the failure abruptness. On the other hand, the {\alpha}_c is obtained from the knowledge of failure abruptness and statistics of avalanches. It is observed that {\delta}_c scales to lower values, suggesting more quasi-brittle like continuous failure even at low strength of disorder, when {\alpha} is increased. Also, the critical fraction {\alpha}_c, required to make the model deviate from the conventional results, increases with decreasing {\delta} values. The analytical expression for {\alpha}_c shows good agreement with the numerical result. Finally, the findings in the paper are compared with previous results as well as with the real life application of composite materials., Comment: 8 pages, 10 figures

We study the dynamical aspects of a statistical-mechanical model for fracture of heterogeneous media: the fiber bundle model with various interaction range. Although the model does not include any thermal activation process, the system exhibits creep-like behaviors under a constant load being slightly above the critical value. These creep-like behaviors comprise three stages: in the primary and tertiary stages, the strain rate exhibits power-law behaviors with time, which are well described by the Omori-Utsu and the inverse Omori laws, respectively, although the exponents are larger than those typically observed in experiments. A characteristic time that defines the onset of power-law behavior in the Omori-Utsu law is found to decrease with the strength of disorder in the system. The analytical solution, which agrees with the above numerical results, is obtained for the mean-field limit. Beyond the mean-field limit, the exponent for the Omori-Utsu law tends to be even larger but decreases with the disorder in the system. Increasing the spatial range of interactions, this exponent is found to be independent of disorder and to converge to the mean-field value. In contrast, the inverse Omori law remains independent of the spatial range of interaction and the disorder strength., Comment: 11 pages, 9 figures

In this work I have studied the effect of disorder and system size in fiber bundle model with a certain range of stress redistribution. The strength of the bundle as well as the failure abruptness is observed with varying disorder, stress release range and system sizes. With a local stress concentration, the strength of the bundle is observed to decrease with system size. The behavior of such decrement changes drastically as disorder strength is tuned. At moderate disorder, the critical stress scales with system size in an inverse logarithmic manner. In low disorder, where the brittle response is highly expected, the strength decreases in a scale free manner. With increasing system size and stress release range the model approaches thermodynamic limit and the mean field limit respectively. A detail study expresses different limit in the model and the corresponding modes of failure on the plane of above mentioned parameters., Comment: 7 pages, 9 figures

The two principal ingredients determining the failure modes of disordered solids are the level of heterogeneity and the length scale of the region affected in the solid following a local failure. While the latter facilitates damage nucleation, the former leads to diffused damage, the two extreme failure modes. In this study, using the random fiber bundle model as a prototype for disorder solids, we classify every failure modes that are the results of interplay between these two effects. We obtain scaling criteria for the different modes and propose a general phase diagram that provides a framework for understanding previous theoretical and experimental attempts of interpolation between these modes., Comment: 10 pages, 13 figures

We show that the failure time $\tau_f$ in fiber bundle model, taken as a prototype of heterogeneous materials, depends crucially on the strength of the disorder $\delta$ and the stress release range $R$ in the system. For $R$ beyond a critical value $R_c$ the distribution of $\tau_f$ follows Weibull form. In this region, the average $\tau_f$ shows the variation $\tau_f \sim L^{\alpha}$ where $L$ is the system size. For $R

Strengthening of materials and preventing abrupt fracture are really challenging jobs in the field of engineering and material science. Such problems can be resolved by using composite materials. In this work, we have studied the fracture process of a composite material in light of fiber bundle model with different elastic constants as well as different random threshold breaking strength of fibers. The critical width of the threshold distribution ($\delta_c$), for which abrupt failure occurs, is studied both analytically and numerically with increasing number of components $(k)$ in the composite and it is shown that $\delta_c$ is inversely related to $k$. Corresponding phase diagram for the model suggests decrease in the tendency of abrupt fracture as number of components in the composite increase., Comment: 6 pages, 6 figures

We report a novel critical behavior in the breakdown of an equal load sharing fiber bundle model at a dispersion $\delta_c$ of the breaking threshold of the fibers. For $\delta < \delta_c$, there is a finite probability $P_b$, that rupturing of the weakest fiber leads to the failure of the entire system. For $\delta \geq \delta_c$, $P_b = 0$. At $\delta_c, P_b \sim L^{-\eta}$, with $\eta \approx 1/3$, where $L$ is the size of the system. As $\delta \rightarrow \delta_c$, the relaxation time $\tau$ diverges obeying the finite size scaling law: $\tau \sim L^{\beta}(|\delta-\delta_c| L^{\alpha})$ with $\alpha, \beta = 0.33 \pm 0.05$. At $\delta_c$, the system fails, at the critical load, in avalanches (of rupturing fibers) of all sizes $s$ following the distribution $P(s) \sim s^{-\kappa}$, with $\kappa = 0.50 \pm 0.01$. We relate this critical behavior to brittle to quasi-brittle transition., Comment: 4 pages, 5 figures

One of the major factors governing the mode of failure in disordered solids is the effective range $R$, over which the stress field is modified following a local rupture event. In random fiber bundle model, considered as a prototype of disordered solids, we show that the failure mode is nucleation dominated in the large system size limit, as long as $R$ scales slower than $L^{\zeta}$, with $\zeta=2/3$. For a faster increase in $R$, the failure properties are dominated by the mean-field critical point, where the damages are uncorrelated in space. In that limit, the precursory avalanches of all sizes are obtained even in the large system size limit. We expect these results to be valid for systems with finite (normalizable) disorder., Comment: 5 pages, 4 figures