Search

The use of composite materials for structures subjected to impacts requires a deep understanding about the dynamic behaviour of the material. To this end, a physically-based computational micromechanics simulation tool has been developed to predict failure initiation in a composite ply over a wide range of strain rates. The computational micromechanics framework incorporates constitutive models for the fibre, matrix and fibre-matrix interface, which are partly calibrated with novel micromechanical testing techniques. The simulation tool was applied to two matrix-dominated deformation modes of the ply: transverse compression and in-plane shear. The comparison of simulation and experimental results at coupon level have revealed a change in failure initiation mechanism of the composite ply with strain rate, which was then corroborated through observation of the fracture surfaces on the samples.

A natural embodiment for multifunctional materials combining energy-storing capabilities and structural mechanical properties are layered structures, similar to both laminate structural composites and electrochemical energy storage devices. A structural composite with integrated electric double layer capacitive storage is produced by resin infusion of a lay up including woven glass fabric used as mechanical reinforcement, carbon nanotube non-woven fabrics as electrodes/current collectors and a polymer electrolyte. The energy-storing layer is patterned with holes, which after integration form resin plugs for mechanical interconnection between layers, similar to rivets. Finite element modelling is used to optimise rivet shape and areal density on interlaminar shear properties. Galvanostatic charge discharge tests during three point bending show no degradation of properties after large deflections or repeated load/unload cycling at 3.5 V.This mechanical tolerance is a consequence of the elimination of metallic current collectors and the effective integration of multifunctional materials, as observed by electron microscopy and X-ray computed tomography. In contrast, control samples with metallic current collectors, analogous to embedded devices, rapidly degrade upon repeated bending., Comment: 27 pages, 20 figures

Ductile fracture has been extensively studied in metals with weak mechanical anisotropy such as copper and aluminum. The fracture of more anisotropic metals, especially those with a hexagonal crystal structure (e.g. titanium), remains far less understood. This paper investigates the ductile fracture process in commercially pure titanium (CP-Ti) with particular emphasis on the influence of grain orientation and local state of strain on void growth. An experimental approach was developed to directly relate the growth of a void in three dimensions to its underlying grain orientation. Grain orientation was obtained by electron back scattered diffraction on void-containing CP-Ti sheets prior to their diffusion bonding. Changes in void dimensions were measured during in-situ straining within an x-ray tomography system. The strong influence of the embedded grain orientation and that of its neighbors on void growth rate and coalescence has been experimentally quantified. Finite element crystal plasticity simulations that take into account both grain orientation and the local strain state were found to predict the experimental void growth. Grains where basal slip dominates show the largest void growth rates because they are closer to a plane strain condition that favors void growth and coalescence.

This work presents a method to produce structural composites capable of energy storage. They are produced by integrating thin sandwich structures of CNT fiber veils and an ionic liquid-based polymer electrolyte between carbon fiber plies, followed by infusion and curing of an epoxy resin. The resulting structure behaves simultaneously as an electric double-layer capacitor and a structural composite, with flexural modulus of 60 GPa and flexural strength of 153 MPa, combined with 88 mF/g of specific capacitance and the highest power (30 W/kg) and energy (37.5 mWh/kg) densities reported so far for structural supercapacitors. In-situ electrochemical measurements during 4-point bending show that electrochemical performance is retained up to fracture, with minor changes in equivalent series resistance for interleaves under compressive stress. En route to improving interlaminar properties we produce grid-shaped interleaves that enable mechanical interconnection of plies by the stiff epoxy. Synchrotron 3D X-ray tomography analysis of the resulting hierarchical structure confirms the formation of interlaminar epoxy joints. The manuscript discusses encapsulation role of epoxy, demonstrated by charge-discharge measurements of composites immersed in water, a deleterious agent for ionic liquids. Finally, we show different architectures free of current collector and electrical insulators, in which both CNT fiber and CF act as active electrodes.