Search

Effective remediation of produced water requires separating crude oil-water mixture and removing the dissolved organic pollutants. Membranes with selective wettability for water over oil enable the gravity-driven separation of an oil-water mixture by allowing water to permeate through while repelling oil. However, these membranes are often limited by their inability to remove the dissolved organic pollutants. In this work, a membrane with in-air superhydrophilic and underwater superoleophobic wettability is fabricated by thermal annealing of a stainless steel mesh. The resulting membrane possesses a hierarchical surface texture covered with a photocatalytic oxide layer composed of iron oxide and chromium oxide. The membrane exhibits chemical and mechanical robustness, which makes it suitable for remediation of crude oil and water mixture. Further, after being fouled by crude oil, the membrane can recover its inherent water-rich permeate flux upon visible light irradiation. Finally, the membrane demonstrates that it can separate surfactant-stabilized crude oil-in-water emulsion under gravity and decontaminate water-rich permeate by photocatalytic degradation of dissolved organic pollutants upon continuous irradiation of visible light.

Precise control over the geometry and chemistry of multiphasic particles is of significant importance for a wide range of applications. In this work, we have developed one of the simplest methodologies for fabricating monodisperse, multiphasic micro- and nanoparticles possessing almost any composition, projected shape, modulus, and dimensions as small as 25 nm. The synthesis methodology involves the fabrication of a nonwettable surface patterned with monodisperse, wettable domains of different sizes and shapes. When such patterned templates are dip-coated with polymer solutions or particle dispersions, the liquids, and consequently the polymer or the particles, preferentially self-assemble within the wettable domains. Utilizing this phenomenon, we fabricate multiphasic assemblies with precisely controlled geometry and composition through multiple, layered depositions of polymers and/or particles within the patterned domains. Upon releasing these multiphasic assemblies from the template using a sacrificial layer, we obtain multiphasic particles. The templates can then be readily reused (over 20 times in our experiments) for fabricating a new batch of particles, enabling a rapid, inexpensive, and easily reproducible method for large-scale manufacturing of multiphasic particles.