Search

The chemical stability and energy density of redox couples are crucial factors in enhancing the durability and cost competitiveness of aqueous flow batteries. This study proposed integrating functional groups to viologen anolyte to increase its solubility and, consequently, energy density and stability for prolonged performance. Specifically, sulfonate and ester groups were selectively incorporated at the nitrogen sites of viologen to enhance solubility, leveraging their asymmetry and double hydrophilicity. Furthermore, an alpha-methyl group was introduced between the bipyridine and ester groups to enhance the chemical stability by preventing stacking and dimerization that can lead to irreversible degradation. The modified viologen demonstrated a remarkable solubility of 3.0 M in deionized water, corresponding to a volumetric capacity of 80.404 Ah L -1 . Additionally, the designed viologen exhibits outstanding retention of 92.4% after 200 cycles with a minimal capacity fading rate of 0.055% per cycle in a 0.1 M flow cell test.

Due to its huge capacity, Si is a promising anode material for practical applications in lithium-ion batteries. Here, using first-principles calculations, we study the applicability of the amorphous Si anode in multivalent-ion batteries, which are of great interest as candidates for post-lithium-ion batteries. Of the multivalent Mg 2+ , Ca 2+ , Zn 2+ , and Al 3+ ions, only Mg 2+ and Ca 2+ are able to form Mg 2.3 Si and Ca 2.5 Si by alloying with Si, delivering very high capacities of 4390 and 4771 mA h g -1 , respectively. Mg 2.3 Si has an 8% smaller capacity than Ca 2.5 Si, but its volume expansion ratio and ion diffusivity are ∼200% smaller and 3 orders of magnitude higher than those of Ca 2.5 Si, respectively. The capacity, volume expansion, and ion diffusion of Mg 2.3 Si are excellently high, moderately small, and fairly fast, respectively, when compared to those of Li 3.7 Si, Na 0.75 Si, and K 1.1 Si. The high performance of Mg 2.3 Si can be understood in terms of the coordination numbers of Si and the atomic size of Mg. This work suggests that, as a carrier ion for the amorphous Si anode, Mg 2+ is the most competitive among the multivalent ions and is at least as good as monovalent ions.

Selenium-enriched nickel selenide (NiSe-Se) nanotubes supported on highly conductive nickel foam (NiSe-Se@Ni foam) were synthesized using chemical bath deposition with the aid of lithium chloride as a shape-directing agent. The uniformly grown NiSe-Se@Ni foam, with its large number of electroactive sites, facilitated rapid diffusion and charge transport. The NiSe-Se@Ni foam electrode exhibited a superior specific capacitance value of 2447.46 F g -1 at a current density value of 1 A g -1 in 1 M aqueous KOH electrolyte. Furthermore, a high-energy-density pouch-type hybrid supercapacitor (HSC) device was fabricated using the proposed NiSe-Se@Ni foam as the positive electrode, activated carbon on Ni foam as the negative electrode, and a filter paper separator soaked in 1 M KOH electrolyte solution. The HSC delivered a specific capacitance of 84.10 F g -1 at a current density of 4 mA cm -2 with an energy density of 29.90 W h kg -1 at a power density of 594.46 W kg -1 for an extended operating voltage window of 1.6 V. In addition, the HSC exhibited excellent cycling stability with a capacitance retention of 95.09% after 10,000 cycles, highlighting its excellent potential for use in the hands-on applications. The real-life practicality of the HSC was tested by using it to power a red light-emitting diode.

A graphene aerogel (GA) with a three-dimensional (3D) structure, ultra-lightweight nature, and high hydrophobicity was simply fabricated by the one-step pyrolysis of glucose and ammonium chloride. The as-synthesized GA exhibited a 3D interconnected microporous architecture with a high surface area of ∼2860 m 2 g -1 and pore volume of 2.24 cm 3 g -1 . The hydrophobic GA (10 mg 100 mL -1 ) demonstrated rapid and excellent adsorption performance for the removal of food toxins such as various biogenic amines (histamine, cadaverine, and spermine) and the hazardous bacterium Staphylococcus aureus (a food contaminant and a cause of poor wound healing) from a liquid matrix with a maximum simultaneous adsorption capacity for multiple biogenic amines of >85.19% (histamine), 74.1% (cadaverine), and 70.11% (spermidine) and a 100% reduction in the viable cell count of S. aureus within 80 min of interaction. The outstanding adsorption capacity can be attributed to a highly interconnected porous network in the 3D architecture and a high surface-to-volume ratio. A case study using soy sauce spiked with multiple biogenic amines showed successful removal of toxins with excellent recyclability without any loss in absorption performance. Biocompatibility of the GA in terms of cell viability was observed even at high concentrations (83.46% and 75.28% at 25 and 50 mg mL -1 , respectively). Confirmatory biocompatibility testing was conducted via live/dead cell evaluation, and the morphology of normal lung epithelial cells was examined via scanning electron microscopy showed no cellular shrinkage. Moreover, GA showed excellent removal of live colonies of S. aureus from the food matrix and immunoblotting analysis showed elevated protein expression levels of β-catenin and α-SMA (α-smooth muscle actin). The biocompatible sugar-based GA could simultaneously adsorb multiple biogenic amines and live bacteria and was easy to regenerate via simple separation due to its high floatability, hydrophobicity, surface area, and porosity without any structural and functional loss, making it especially relevant for food safety and biomedical applications.

The utilization of a sustainable and lightweight graphene aerogel (GA), synthesized from crude biomass, as a cell growth promoter and an adsorbent for the efficient removal of histamine (HIS), a food toxicant, from the real food matrix has been explored. Due to the self-supported three-dimensional nanoporous honeycomb-like structure of the graphene framework and the high surface area, the synthesized GA achieved an 80.69 ± 0.89% removal of HIS from red wine (spiked with HIS) after just 60 min under both acidic (3.0) and neutral (7.4) pH conditions. Furthermore, simple cleaning with 50% ethanol and deionized water, without any change in weight, allowed them to be reused more than 10 times with a still significant HIS removal ability (more than 71.6 ± 2.57%). In vitro cell culture experiments demonstrated that the synthesized GA had nontoxic effects on the cell viability (up to 80.35%) even at higher concentrations (10 mg mL -1 ), as determined via the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and lactate dehydrogenase assays using human lung bronchial epithelial cells. Interestingly, GA promotes the wound-healing ability on the scratched epithelial cell surfaces via enhancing the cell migrations as also validated by the western blot analysis via expression levels of epithelial β-catenin and E-cadherin proteins. The distinct structural advantage along with the nontoxicity of the green synthesized GA will not only facilitate the economic feasibility of the synthesized GA for its practical real-life applications in liquid toxin and pollutant removal from the food and environment but also broaden its applicability as a promising biomaterial of choice for biomedical applications.

Metal nanoparticle-containing porous organic polymers have gained great interest in chemical and pharmaceutical applications owing to their high reactivity and good recyclability. In the present work, a palladium nanoparticle-decorated triazine-urea-based porous organic polymer (Pd@TU-POP) was designed and synthesized using 1,3-bis(4-aminophenyl)urea with cyanuric chloride and palladium acetate. The porous structure and physicochemical properties of the electrode material Pd@TU-POP were observed using a range of standard techniques. The Pd@TU-POP material on the electrode surface showed superior sensing ability for rutin (RT) because the Pd dispersion facilitated the electrocatalytic performance of TU-POP by reducing the overpotential of RT oxidation dramatically and improving the stability significantly. Furthermore, TU-POP provides excellent structural features for loading Pd nanoparticles, and the resulting Pd@TU-POP exhibited enhanced electron transfer and outstanding sensing capability in a linear range between 2 and 200 pM having a low detection value of 5.92 × 10 -12 M (S/N = 3). The abundant porous structure of Pd@TU-POP not only provides electron transport channels for RT diffusion but also offers a facile route for quantification sensing of RT with satisfactory recoveries in aqueous electrolyte containing human plasma and red wine. These data reveal that the synthetic Pd@TU-POP is an excellent potential platform for the detection of RT in biological samples.

Tris(trimethylsilyl) phosphite (TMSP) has received considerable attention as a functional additive for various cathode materials in lithium-ion batteries, but the effect of TMSP on the surface stability of a graphite anode has not been studied. Herein, we demonstrate that TMSP serves as an effective solid electrolyte interphase (SEI)-forming additive for graphite anodes in lithium-ion batteries (LIBs). TMSP forms SEI layers by chemical reactions between TMSP and a reductively decomposed ethylene carbonate (EC) anion, which is strikingly different from the widely known mechanism of the SEI-forming additives. TMSP is stable under cathodic polarization, but it reacts chemically with radical anion intermediates derived from the electrochemical reduction of the carbonate solvents to generate a stable SEI layer. These TMSP-derived SEI layers improve the interfacial stability of the graphite anode, resulting in a retention of 96.8% and a high Coulombic efficiency of 95.2%. We suggest the use of TMSP as a functional additive that effectively stabilizes solid electrolyte interfaces of both the anode and cathode in lithium-ion batteries.

Here, we report the fabrication of palladium nanoparticles on porous aromatic frameworks (Pd/PAF-6) using a facile chemical approach, which was characterized by various spectro- and electrochemical techniques. The differential pulse voltammetry (DPV) response of Pd/PAF-6 toward the vanillin (VA) sensor shows a linear relationship over concentrations (10-820 pM) and a low detection limit (2 pM). Pd/PAF-6 also exhibited good anti-interference performance toward 2-fold excess of ascorbic acid, nitrophenol, glutathione, glucose, uric acid, dopamine, ascorbic acid, 4-nitrophenol, glutathione, glucose, uric acid, dopamine, and 100-fold excess of Na(+), Mg(2+), and K(+) during the detection of VA. The developed electrochemical sensor based on Pd/PAF-6 had good reproducibility, as well as high selectivity and stability. The established sensor revealed that Pd/PAF-6 could be used to detect VA in biscuit and ice cream samples with satisfactory results.

A microporous covalent triazine polymer (CTP) network with a high surface area was synthesized via the Friedel-Crafts reaction and employed as a potential transport system for drug delivery and controlled release. The CTP was transformed to the nanoscale region by intense ultrasonication followed by filtration to yield nanoscale CTP (NCTP). This product showed excellent dispersibility in physiological solution while maintaining its chemical structure and porosity. An anticancer drug, doxorubicin (DOX), was loaded onto the NCTP through hydrophobic and π-π interactions, and its release was controlled at pH 4.8 and 7.4. The NCTP showed no toxicity toward cancer or normal cells, but the NCTP-DOX complex showed high efficacy against both types of cells in vitro. In-vitro cell imaging revealed that NCTP is a potential material for bioimaging. The potency of NCTP on cellular senescence was confirmed by the expression of senescence associated marker proteins p53 and p21. These results suggest that NCTP can be used as a new platform for drug delivery and imaging with potential applications in diagnosis and therapy.

Carbon-based electrochemical double-layer capacitors and pseudocapacitors, consisting of a symmetric configuration of electrodes, can deliver much higher power densities than batteries, but they suffer from low energy densities. Herein, we report the development of high energy and power density supercapacitors using an asymmetric configuration of Fe2O3 and MnO2 nanoparticles incorporated into 3D macroporous graphene film electrodes that can be operated in a safe and low-cost aqueous electrolyte. The gap in working potential windows of Fe2O3 and MnO2 enables the stable expansion of the cell voltage up to 1.8 V, which is responsible for the high energy density (41.7 Wh kg(-1)). We employ a household microwave oven to simultaneously create conductivity, porosity, and the deposition of metal oxides on graphene films toward 3D hybrid architectures, which lead to a high power density (13.5 kW kg(-1)). Such high energy and power densities are maintained for over 5000 cycles, even during cycling at a high current density of 16.9 A g(-1).