Search

It is evident that the exhaustive use of fossil fuels for decades has significantly contributed to global warming and environmental pollution. To mitigate the harm on the environment, lithium-oxygen batteries (LOBs) with a high theoretical energy density (3458 Wh kg -1 Li 2 O 2 ) compared to that of Li-ion batteries (LIBs) have been considered as an attractive alternative to fossil fuels. For this purpose, porous carbon materials have been utilized as promising air cathodes owing to their low cost, lightness, easy fabrication process, and high performance. However, the challenge thus far lies in the uncontrollable formation of Li 2 CO 3 at the interface between carbon and Li 2 O 2 , which is detrimental to the stable electrochemical performance of carbon-based cathodes in LOBs. In this work, we successfully protected the surface of the free-standing carbon nanofibers (CNFs) by coating it with a layer of iridium metal through direct sputtering (CNFs@Ir), which significantly improved the lifespan of LOBs. Moreover, the Ir would play a secondary role as an electrochemical catalyst. This all-in-one cathode was evaluated for the formation and decomposition of Li 2 O 2 during (dis)charging processes. Compared with bare CNFs, the CNFs@Ir cathode showed two times longer lifespan with 0.2 V Li lower overpotentials for the oxygen evolution reaction. We quantitatively calculated the contents of CO 3 2- in Li 2 CO 3 formed on the different surfaces of the bare CNFs (63% reduced) and the protected CNFs@Ir (78% reduced) cathodes after charging. The protective effects and the reaction mechanism were elucidated by ex situ analyses, including scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy.

A relatively low compressive strength significantly limits the practical application of sponges made from electrospun fibers because of an ultralow density <10 mg/cm 3 . To solve this problem, fibrous polyimide sponges with high density (HDPISG) were prepared using a "self-gluing" concept. The HDPISG have a density of up to 280 mg/cm 3 and porosity >80%, and showed good breathability. The compressive strength increased significantly as the sponge densities increased. The HDPISG with a density of 280 mg/cm 3 has the highest compressive strength of 5190 and 35,900 kPa under 50 and 80% compression, respectively. The small HDPISG can even hold weights more than ten thousand times of the weight of the sponge. The HDPISG also possess excellent mechanical properties after thermal treatments and no loss of compressive strength can be seen after heating at 300 °C for 30 h. Further study indicates that the HDPISG can maintain their main shape after carbonization.