Search

The realization of high-efficient digestion in a microfluidic reactor is considered to be advantageous for pretreatment toward online pollutant detection. However, it is difficult to achieve satisfactory device performance due to the gap between the low digestion reaction efficiency and the demand for rapid pretreatment for online detection. Herein, we design and manufacture an optofluidic microreactor combined with a MnO

Planar-type perovskite solar cells (p-PSCs) based on SnO2 have garnered further attention due to their simple and low-temperature fabrication. Improving the critical properties of the electron transport layer (ETL) is an effective way to enhance the performance of p-PSC devices. Here, a brand-new method is developed to relieve the contact recombination caused by the rough fluorine-doped tin oxide (FTO) surface and further boosts the electrical concentration of the ETL. A SnO2-ethylene diamine tetraacetic acid (EDTA) acylamide compound (SEAC) with hydrogen bond-induced adjustable cluster size is reported for the first time. The rational choice of the SEAC cluster size is the key for obtaining the smooth interfacial morphology of the ETL on the rugged FTO substrate. In addition, the energy band gap decreases with the increasing cluster size, and consequently, results in improved electrical conductivity of the SEAC. The upshifted Fermi energy level leads to higher electron concentration, which is an important physical quantity of the ETL. The PSC devices based on the optimized SEAC achieve an improved power conversion efficiency of 21.29% with negligible J-V hysteresis due to significantly enhanced electron transport and reduced contact charge recombination at the ETL/perovskite interface. In general, this paper comes up with a unique strategy to improve the quality of the SnO2-based ETL.

Li metal is considered a highly desirable anode for next-generation high-energy-density rechargeable lithium batteries. However, irregular Li dendrite formation and infinite relative volume changes prevent the commercial adoption of Li-metal anodes. Here, electrophoretic deposition of black phosphorus (BP) on commercial Cu foam (BP@Cu foam) is reported to regulate Li nucleation for the first time. First-principles calculations reveal that the unique two-dimensional (2D) structure of BP is beneficial to Li intercalation and propagation. Compared with the random Li nucleation and growth on bare Cu foam, Li ions are preferably confined into the BP layers, which induces uniform Li nucleation at the early stage of the Li deposition and guides the following lateral Li growth on BP@Cu foam. In addition, the three-dimensional (3D) porous and conductive framework of Cu foams further mitigate the volume change and dissipate the current density. Attributing to these merits, the BP@Cu foam exhibits significantly enhanced Coulombic efficiency and cycling stability compared with bare Cu foam. In the full-cell configuration paired with a Li4Ti5O12 or LiFePO4 cathode, the BP@Cu foam also boosts the battery performances. This work provides new insights into the development of BP and other elaborate 2D materials for achieving dendrite-free Li-metal anodes.

Three-dimensional branched TiO2 architectures (3D BTA) with controllable morphologies were synthesized via a facile template-free one-pot solvothermal route. The volume ratio of deionized water (DI water) and diethylene glycol in solvothermal process is key to the formation of 3D BTA assembled by nanowire-coated TiO2 dendrites, which combines the advantages of 3D hierarchical structure and 1D nanoscale building blocks. Benefiting from such unique structural features, the BTA in full bloom achieved significantly increased specific surface areas and shortened Li(+) ion/electrons diffusion pathway. The lithium-ion batteries based on BTA in full bloom exhibited remarkably enhanced reversible specific capacity and rate performance, attributing to the high contact area with the electrolyte and the short solid state diffusion pathway for Li(+) ion/electrons promoting lithium insertion and extraction.

Novel architectured LiFePO4 (LFP) that consisted of ordered LFP nanocubes was prepared through a facile hydrothermal method using polyethylene glycol (PEG) as a surfactant. The micro/nanostructured LFP with various morphologies ranging from cube cluster to rugby-like structure was synthesized via controlling the pH values of the precursor. A reasonable assembly process elucidating the formation of the hierarchical structure is also provided based on the experimental results. After a combination of carbon (C) coating and reduced graphene oxide (RGO) wrapping, the obtained LFP/C/RGO composites exhibit enhanced electrochemical performance compared to that of blank LFP synthesized under the same condition. Among as-synthesized cube-cluster-like, dumbbell-like, rod-like, and rugby-like composites, the rugby-like LFP/C/RGO reveal the best electrochemical properties with the discharge specific capacity of ∼150 mA h g(-1) after 100 cycles and a high reversible specific capacity of 152 mA h g(-1) at 0.1 C. The prepared LFP/C/RGO composite can be a promising cathode material for high energy, low cost, and environmentally friendly lithium-ion batteries.