Search

Piezoelectric organic–inorganic lead halide perovskites have recently attracted much attention in the field of optoelectronic devices. However, their piezoelectric properties as a possible way to modulate device performances have rarely been reported. Here, we study experimentally a photodetector based on CH3NH3PbI3(MAPbI3) single crystals, whose performance is effectively modulated viaan emerging effect—the piezo-phototronic effect, which is to use the piezoelectric polarization charges to tune the optoelectronic processes at the interface. A piezoelectric coefficient of 10.81 pm/V of the CH3NH3PbI3single crystal is obtained. Under 680 nm laser illumination with a power density of 3.641 mW/cm2and at an external bias of 2 V, compared to the case without straining, the light current of the photodetector is enhanced by ∼120% when a 43.48 kPa compressive pressure is applied. The response speed of the photocurrent is 3 and 2 times faster than the cases without applying pressure for the light-on and light-off states, respectively. This work proves that the performance of the photodetector based on MAPbI3single crystals can be effectively enhanced by the piezo-phototronic effect, providing a good method for optimizing the performance of future perovskite-based optoelectronic devices.

Electroadhesion generates an adhesion force using an externally applied power source, which has versatile applications in robotics and material handling. In this study, a self-powered electroadhesion system using enhanced triboelectric nanogenerators (TENGs) to supply power for electroadhesion is presented. By introducing a triboelectric charge supplement channel, the open circuit voltage of the TENG can be significantly boosted by over 10 times, from ∼230 V to more than 3300 V for a single TENG unit, providing sufficiently high voltage for an electroadhesive patch to generate enough adhesion for practical use. The charge supplement channel takes effect through a replenishing mechanism for dissipated charges, maintaining an optimal charge distribution throughout TENG electrodes, which enables the highest open circuit voltage under given surface charge density and device configuration. The fabricated self-powered electroadhesion system shows the ability to manipulate objects of various materials viaeasy and straightforward operations, demonstrating a great potential for applications in material handling and robotics. Moreover, the voltage enhancement mechanism by the charge supplement channel could be extended to TENGs of other modes, which can provide reliable power sources for various applications that require a high voltage.