Search

The exterior application of fire-retardant (FR) timber necessitates it to have high durability because of the possibility to be exposed to rainfall. In this study, water-leaching resistance of FR wood has been imparted by grafting phosphate and carbamate groups of the water-soluble FR additives ammonium dihydrogen phosphate (ADP)/urea onto the hydroxyl groups of wood polymers via vacuum-pressure impregnation, followed by drying/heating in hot air. A darker and more reddish wood surface was observed after the modification. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, solid-state 13C cross-polarization magic-angle-spinning nuclear magnetic resonance (13C CP-MAS NMR), and direct-excitation 31P MAS NMR suggested the formation of C–O–P covalent bonds and urethane chemical bridges. Scanning electron microscopy/energy-dispersive X-ray spectrometry suggested the diffusion of ADP/urea into the cell wall. The gas evolution analyzed by thermogravimetric analysis coupled with quadrupole mass spectrometry revealed a potential grafting reaction mechanism starting with the thermal decomposition of urea. Thermal behavior showed that the FR-modified wood lowered the main decomposition temperature and promoted the formation of char residues at elevated temperatures. The FR activity was preserved even after an extensive water-leaching test, confirmed by the limiting oxygen index (LOI) and cone calorimetry. The reduction of fire hazards was achieved through the increase of the LOI to above 80%, reduction of 30% of the peak heat release rate (pHRR2), reduction of smoke production, and a longer ignition time. The modulus of elasticity of FR-modified wood increased by 40% without significantly decreasing the modulus of rupture. Validerad;2023;Nivå 2;2023-04-21 (joosat);Funder: OP RDE (Grant no.CZ.02.1.01/0.0/0.0/16_019/0000803); CT WOOD, Luleå University of TechnologyLicens fulltext: CC BY License

This work presents a rapid and facile way to access the cell wall of wood with magnetic nanoparticles (NPs), providing insights into a method of wood modification to prepare hybrid bio-based functional materials. Diffusion-driven infiltration into Scots pine (Pinus sylvestris L.) sapwood was achieved using colloidal Fe3O4 nanoparticles. Optical microscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy, transmission electron microscopy, and X-ray powder diffraction analyses were used to detect and assess the accessibility of the cell wall to Fe3O4. The structural changes, filling of tracheids (cell lumina), and NP infiltration depth were further evaluated by performing X-ray microcomputed tomography analysis. Fourier transform infrared spectroscopy was used to assess the chemical changes in Scots pine induced by the interaction of the wood with the solvent. The thermal stability of Fe3O4-modified wood was studied by thermogravimetric analysis. Successful infiltration of the Fe3O4 NPs was confirmed by measuring the magnetic properties of cross-sectioned layers of the modified wood. The results indicate the feasibility of creating multiple functionalities that may lead to many future applications, including structural nanomaterials with desirable thermal properties, magnetic devices, and sensors., The work has been supported by the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (FORMAS) in the Project “Utilization of solid inorganic waste from the aquaculture industry as wood reinforcement material for flame retardancy” (Grant No. 2018-01198). Magnetic characterization at G.U. has been supported by the US NSF (ECCS-1933527). The acquisition of a Magnetic Property Measurement System (MPMS3, Quantum Design) at G.U. used here was supported by the US NSF (DMR-1828420). We acknowledge Dr. Agnieszka Ziolkowska at the Umeå Centre for Electron Microscopy (UCEM), Sweden, and the National Microscopy Infrastructure, NMI (VR-RFI 2019-00217) for providing assistance in TEM microscopy.

The objective of the work was to improve the leaching resistance of fire-retardant (FR) modified wood by the incorporation of a thermoset resin. Here, Scots pine (Pinus sylvestris L.) sapwood was impregnated with melamine formaldehyde (MF) resin and hydrophilic FRs guanyl-urea phosphate/boric acid by a vacuum-pressure treatment. Resistance to leaching of FR-modified wood was evaluated, after conducting an accelerated aging test according to European standard EN 84. Inductively coupled plasma analysis showed that the incorporation of MF resin significantly reduced the leachability of FRs. Scanning electron microscopy/energy-dispersive X-ray spectrometry revealed that the mechanism of water resistance was by doping the FRs into MF resin microspheres. Fourier transform infrared spectra showed the chemical functionality changes of FR-modified wood such as the formation of methylene bridges by drying the modified wood specimens. An increase in the thermal stability of FR-modified wood was confirmed by thermal gravimetric analysis. Excellent fire performance of FR-modified wood after leaching was affirmed by the limiting oxygen index and cone calorimeter tests. Validerad;2021;Nivå 2;2021-05-21 (alebob);Finansiär: Slovak Research and Development Agency (APVV-16-0223); Czech Republic’s funding office (CZ.02.1.01/0.0/0.0/16_019/0000803); Swedish wood industry