Search

A hollow indented anode is proposed for increasing the neutral gas density in a discharge channel, in order to improve the performance of the thruster. The experimental results show that a hollow indented anode structure can effectively improve the performance, compared to a hollow straight anode under similar operating conditions, in terms of thrust, propellant utilization, ionization rate, and anode efficiency. Furthermore, simulations show that the indented anode can effectively increase the neutral gas density in a discharge channel and on the centerline of the channel, compared to a hollow straight anode. In addition, it can increase the ionization rate in the channel and the pre-ionization in the anode. Therefore, the hollow indented anode could be considered as an important design idea for improving thruster performance. [ABSTRACT FROM AUTHOR]

The theoretical specific impulse of Hall thrusters using a krypton propellant is much higher than that of those using xenon. However, the actual benefits of this improvement are limited by the difficulty in achieving krypton atom ionization, and its efficiency is much lower than that of xenon. In this study, the anode specific impulse and anode efficiency of Hall thrusters using krypton propellant were improved by adding a small quantity of xenon. A dual-channel supply of xenon and krypton was achieved by optimizing the discharge channel structure based on the design of the aft-loaded magnetic field. The effects of the xenon and krypton supply method and xenon fraction on the discharge characteristics of the Hall thruster were investigated by conducting discharge experiments using the mixed propellant. The results indicated that injecting a small quantity of xenon significantly improved the ionization of krypton, improved the ionization and acceleration efficiency of the thruster, and fully utilized the high specific impulse characteristics of krypton. Furthermore, the addition of a small quantity of xenon also significantly increased the upper limit of the discharge voltage for stable operation using krypton from 500 V. At the maximum tested xenon fraction, the maximum discharge voltage was loaded to 900 V. At a discharge voltage of 800 V, the optimal anode efficiency and anode specific impulse increased by 4.5 % and 534 s, respectively, compared with those for pure xenon propellant (with an anode efficiency of 54 % and anode specific impulse of 3034 s). The results of this study are of great significance for the design of high-efficiency, high-specific-impulse, and low-cost Hall thrusters. • A dual-channel gas supply structure is proposed, which can supply two kinds of gases into the discharge channel individually. • Thruster performance is optimal when krypton is supplied downstream and auxiliary xenon is supplied upstream. • High-voltage operating ability under krypton is greatly improved with the assistance of a small quantity of xenon. [ABSTRACT FROM AUTHOR]

Using a permanent magnet to realize a design with a large height-radius ratio can effectively reduce the radial size of the thruster. The experimental results show that a Hall thruster with a large height-radius ratio also has significant advantages in its discharge performance. Taking the 1.35 kW Hall thruster HEP-1350PM, which has a large height-radius ratio, as an example, the thrust, specific impulse, and efficiency of HEP-1350PM are increased by up to 4.3%, 10.4%, and 7%, respectively, as compared to SPT-100, while its weight is only 56% of that of SPT-100. Numerical simulations were performed to understand the discharge characteristics of a Hall thruster with a large height-radius ratio and the internal mechanism of its performance improvement. The results show that the small middle diameter and wide channel structure concentrate the distribution of the neutral gas in the channel, accelerate the decrease of the propellant density along the axial direction, and move the main ionization zone closer to the channel upstream. These factors increase the ionization concentration, ionization rate peak, working medium utilization rate, and voltage utilization rate. They also reduce the ion loss on the wall surface and plume divergence, thereby improving the comprehensive discharge performance. This study verifies the feasibility of a large height-radius ratio in the design of a Hall thruster, and demonstrates that the design would not only be valuable for reducing the volume and weight of the thruster, but also has the advantages of enhancing its discharge performance and prolonging its working life. • Large height-radius ratio design can reduce the volume and weight of the thruster. • A large height-radius ratio can improve the discharge performance of the thruster. • Hall thruster with a large height-radius ratio has a higher acceleration efficiency. [ABSTRACT FROM AUTHOR]

The use of krypton in the field of electric propulsion has become a key research topic owing to its high specific impulse and high reserves. However, because krypton has features such as a small ionization cross section and high ionization energy, its ionization performance is relatively low, thereby increasing the actual specific impulse loss of the krypton Hall thruster in comparison with its theoretical value. Therefore, to use of krypton as the propellant of the Hall thruster instead of xenon, it is necessary to study the optimization of its ionization process. In this study, a gas distributor with a rotating propellant supply mode is designed, considering factors such as the velocity and density of the velocity of neutral atoms, which affects the ionization process. The distribution of neutral atom parameters in the discharge channel is changed by the rotation; and its influences on the propellant ionization and other performance parameters of the Hall thruster are experimentally analyzed with respect to the magneto-ampere, volt-ampere, and flow rate-ampere characteristics. The results demonstrate that the rotating propellant supply reduces the axial velocity of neutral atoms, increases the density and circumferential motion distance, and thus improves the ionization efficiency of the krypton Hall thruster. Furthermore, the performance parameters, such as thrust and efficiency, are also improved, and the plume divergence angle is reduced. When the discharge voltage is 450 V and the anode flow rate is 60 sccm, the rotating propellant supply can increase the anode efficiency of the axial propellant supply mode from 46.2% to 53.2%. However, the plume divergence half-angle reduces from 39.2° to 35.5°. In addition, an increase in the anode flow rate and discharge voltage continuously increases the performance promotion in the rotating propellant supply mode. • Rotating propellant supply is achieved by a particular gas distributor design. • Rotating propellant supply slows down krypton neutrals inside the channel and improves ionization efficiency. • Performance increment under rotating propellant supply increases with both discharge voltage and krypton flow rate. [ABSTRACT FROM AUTHOR]

Hall thrusters generally use a U-shaped insulated wall to form an annular discharge channel. As high-power and high-specific-impulse Hall thrusters develop, the disadvantages of this conventional topology—in terms of material and mechanical strength, processing, and manufacturing—are gradually being exposed. Therefore, in this study, a new wall material was employed, and its effects were investigated numerically and experimentally. A boron nitride ceramic wall was retained in the strong discharge area owing to its excellent secondary electron emission characteristics; while a metallic wall was applied upstream of the channel, forming a segmented hybrid wall. A Hall thruster with an aft-loaded magnetic field, which offers a long lifetime, was adopted for this study. The particle-in-cell simulation shows that the length of the metallic wall has a significant impact on thruster performance. The same trend was observed in the experiments. Under the optimal metallic wall length, the anode efficiency is improved by approximately 4% compared to that of the ceramic-wall-only case. The physics involved is analyzed and qualified by comparing the simulated and measured results. The findings of this study provide valuable guidance for the optimal design of high-power, high-specific-impulse Hall thrusters. • Metal-ceramic hybrid channel wall improves high-voltage performance of Hall thrusters. • Optimal length of metallic segment exists and is strongly related to magnetic field. • Too long metallic segment augments electron wall loss and then ionization loss. [ABSTRACT FROM AUTHOR]