Search

A comprehensive approach to creating a control system for the shape of the radio-reflecting surface of a large-size space reflector is considered. Large-aperture space antennas are used for satellite communications and space exploration. The design of these structures is one of the most promising areas. Ensuring the specified characteristics of the reflector is directly related to maintaining the specified shape of the radio-reflective netting. Developing a control system for the shape of the active antenna surface is an urgent task. Optimizing this process makes it possible to accomplish the mission during the operational period effectively. The paper evaluates the effects of perturbations on a large-scale structure operating in outer space. A method for adjusting the geometry of the frontal network is proposed. This allows for improved communication between spacecraft and ground stations, which is very important for the safety of space flights. The conductive parts of the reflector are considered to transmit energy and control signals to the actuators. The application results of various control algorithms of the executive device making it possible to correct the netting considering the minimization of energy costs and oscillations of the structure are shown. According to the simulation results, the optimal algorithm of the target criteria hierarchy showed greater stability in terms of convergence in the presence of measurement noise and disturbances, which allows it to be applied in real time. This algorithm is supposed to be used in the future when creating a prototype of the system for controlling the shape of the radio-reflective surface of a large-size space reflector using its current-conducting structural parts. • The design of a system for setting up and maintaining a radio-reflective network fabric has been developed. • Algorithms are developed to minimize energy when setting up a radio-reflective mesh. • The optimal algorithm of the control allows solving the problem in real time. • The method for transmitting energy and control signals through the use of conductive structural parts of the reflector is proposed. [ABSTRACT FROM AUTHOR]