Search

For the drag and heat flux reduction of hypersonic blunt body, a novel combinational spike-aerodisk and channel concept has been proposed. The high pressure air behind the bow shock flows into the channel at the head of the aerodisk, and then sprays out through the lateral jet in the middle of the spike. The Reynolds-averaged Navier-Stokes (RANS) equations coupled with the shear stress transport (SST) k - ω turbulence model have been employed to simulate the flow field. The numerical results reveal that compared with the spike-aerodisk, with the application of the channel, the lateral jet pushes the separated shock wave away from the spike. The range of the recirculation zone between the shear layer and the spike is increased, and the intensity of the reattached shock wave is significantly weakened, so the drag and heat flux reduction properties of the combinational configuration are significantly improved. The influences of the channel convergent half angle and lateral jet location on the flow field, drag and heat flux reduction properties are investigated thoroughly. When the channel convergent half angle is appropriate and the location of the lateral jet is close to the middle of the spike, the drag and heat flux reduction effect becomes better. Besides, with the increase of the Mach number and the decrease of the flying height, the drag and heat flux reduction performance become more significant. In the research range, the combinational configuration in which the convergent half angle is 60° and the lateral jet is located in the middle of the spike has a better overall effect of drag and heat flux reduction, and the effect reaches the best when the Mach number is 6 and the flying height is 20 km. Compared with the spike-aerodisk, the total drag coefficient of the configuration is reduced by 12.95%, and the peak value of Stanton number along the blunt body surface is reduced by 35.19%. • A novel combinational spike-aerodisk and channel concept was numerically investigated. • The combinational concept has better performance in both drag and heat flux reduction. • Effects of channel convergent half angle and lateral jet location on drag and heat flux reduction were studied. • Variation laws of drag and heat flux reduction under different Mach numbers and flight altitudes were analyzed. [ABSTRACT FROM AUTHOR]

By slotting an inlet at the head of the aerodisk, a channel through the spike, and the lateral jet outlet at the middle of the spike, the blunt body with spike-aerodisk can further reduce its aeroheating and drag. In this paper, the numerical simulation method was used to analyze the flow field structure of this spike-aerodisk-channel, the effects of the spike length, the aerodisk diameter, and the channel diameter on the drag and aeroheating performance of this spike-aerodisk-channel configuration were studied. In general, the lateral jet introduced by the channel from the stagnation region of the aerodisk leads to the shear layer separation in advance, pushes the separation shock away from the spike, enlarges the recirculation zone near the blunt body, avoids the interaction between the separation shock and the reattachment shock, increases the distance from the reattachment shock to the surface of the blunt body. The reattachment shock strength of the blunt body is weakened. With increased spike length and channel diameter, drag and aeroheating reduction are improved. With the increase of the diameter of the aerodisk, the aeroheating performance is improved, but the drag reduction performance continues to decline. Compared with the plain spike-aerodisk, the spike-aerodisk-channel is generally conducive to further drag and aeroheating reduction. In the range of research parameters, considering the effect of drag and aeroheating reduction and the structural feasibility, the spike-aerodisk-channel has the best drag and aeroheating reduction performance when the spike length is twice the blunt-body diameter, the ratio of the aerodisk diameter to the blunt-body diameter is 0.3, and the ratio of the channel diameter to the blunt-body diameter is 0.075. Compared with the plain spike-aerodisk of the same size, the aeroheating reduction efficiency is increased by 37.9%, and the drag reduction efficiency is increased by 16.0%. • Drag and aeroheating reduction mechanism of the spike-aerodisk and channel concept under hypersonic conditions was investigated by the numerical simulation. • Three influence factors were analyzed and compared comprehensively. • Combined spike-aerodisk and channel concept is a promising drag and aeroheating reduction technique. [ABSTRACT FROM AUTHOR]