Search

Current meniscus tissue repairing strategies involve partial or total meniscectomy, followed by allograft transplantation or synthetic material implantation. However, allografts and synthetic implants have major drawbacks such as the limited supply of grafts and lack of integration into host tissue, respectively. In this study, we investigated the effects of conditioned medium (CM) from meniscal fibrochondrocytes and TGF-β3 on tonsil-derived mesenchymal stem cells (T-MSCs) for meniscus tissue engineering. CM-expanded T-MSCs were encapsulated in riboflavin-induced photocrosslinked collagen-hyaluronic acid (COL-RF-HA) hydrogels and cultured in chondrogenic medium containing TGF-β3. In vitro results indicate that CM-expanded cells followed by TGF-β3 exposure stimulated the expression of fibrocartilage-related genes (COL2, SOX9, ACAN, COL1) and production of extracellular matrix components. Histological assessment of in vitro and subcutaneously implanted in vivo constructs demonstrated that CM-expanded cells followed by TGF-β3 exposure resulted in highest cell proliferation, GAG accumulation, and collagen deposition. Furthermore, when implanted into meniscus defect model, CM treatment amplified the potential of TGF-β3 and induced complete regeneration., Statement of Significance: Conditioned medium derived from chondrocytes have been reported to effectively prime mesenchymal stem cells toward chondrogenic lineage. Type I collagen is the main component of meniscus extracellular matrix and hyaluronic acid is known to promote meniscus regeneration. In this manuscript, we investigated the effects of conditioned medium (CM) and transforming growth factor-β3 (TGF-β3) on tonsil-derived mesenchymal stem cells (T-MSCs) encapsulated in riboflavin-induced photocrosslinked collagen-hyaluronic acid (COL-RF-HA) hydrogel. We employed a novel source of conditioned medium, derived from meniscal fibrochondrocytes. Our in vitro and in vivo results collectively illustrate that CM-expanded cells followed by TGF-β3 exposure have the best potential for meniscus regeneration. This manuscript highlights a novel stem cell commitment strategy combined with biomaterials designs for meniscus regeneration., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

In this study, gelatin-based 3D conduits with three different microstructures (nanofibrous, macroporous and ladder-like) were fabricated for the first time via combined molding and thermally induced phase separation (TIPS) technique for peripheral nerve regeneration. The effects of conduit microstructure and mechanical properties on the transdifferentiation of bone marrow-derived mesenchymal stem cells (MSCs) into Schwann cell (SC) like phenotypes were examined to help facilitate neuroregeneration and understand material-cell interfaces. Results indicated that 3D macroporous and ladder-like structures enhanced MSC attachment, proliferation and spreading, creating interconnected cellular networks with large numbers of viable cells compared to nanofibrous and 2D-tissue culture plate counterparts. 3D-ladder-like conduit structure with complex modulus of ∼0.4×10 6 Pa and pore size of ∼150μm provided the most favorable microenvironment for MSC transdifferentiation leading to ∼85% immunolabeling of all SC markers. On the other hand, the macroporous conduits with complex modulus of ∼4×10 6 Pa and pore size of ∼100μm showed slightly lower (∼65% for p75, ∼75% for S100 and ∼85% for S100β markers) immunolabeling. Transdifferentiated MSCs within 3D-ladder-like conduits secreted significant amounts (∼2.5pg/mL NGF and ∼0.7pg/mL GDNF per cell) of neurotrophic factors, while MSCs in macroporous conduits released slightly lower (∼1.5pg/mL NGF and 0.7pg/mL GDNF per cell) levels. PC12 cells displayed enhanced neurite outgrowth in media conditioned by conduits with transdifferentiated MSCs. Overall, conduits with macroporous and ladder-like 3D structures are promising platforms in transdifferentiation of MSCs for neuroregeneration and should be further tested in vivo., Statement of Significance: This manuscript focuses on the effect of microstructure and mechanical properties of gelatin-based 3D conduits on the transdifferentiation of mesenchymal stem cells to Schwann cell-like phenotypes. This work builds on our recently accepted manuscript in Acta Biomaterialia focused on multifunctional 2D films, and focuses on 3D microstructured conduits designed to overcome limitations of current strategies to facilitate peripheral nerve regeneration. The comparison between conduits fabricated with nanofibrous, macroporous and ladder-like microstructures showed that the ladder-like conduits showed the most favorable environment for MSC transdifferentiation to Schwann-cell like phenotypes, as seen by both immunolabeling as well as secretion of neurotrophic factors. This work demonstrates the importance of controlling the 3D microstructure to facilitate tissue engineering strategies involving stem cells that can serve as promising approaches for peripheral nerve regeneration., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Recently, hyaluronic acid (HA) hydrogels have been extensively researched for delivering cells and drugs to repair damaged tissues, particularly articular cartilage. However, the in vivo degradation of HA is fast, thus limiting the clinical translation of HA hydrogels. Furthermore, HA cannot bind proteins with high affinity because of the lack of negatively charged sulfate groups. In this study, we conjugated tunable amount of sulfate groups to HA. The sulfated HA exhibits significantly slower degradation by hyaluronidase compared to the wild type HA. We hypothesize that the sulfation reduces the available HA octasaccharide substrate needed for the effective catalytic action of hyaluronidase. Moreover, the sulfated HA hydrogels significantly improve the protein sequestration, thereby effectively extending the availability of the proteinaceous drugs in the hydrogels. In the following in vitro study, we demonstrate that the HA hydrogel sulfation exerts no negative effect on the viability of encapsulated human mesenchymal stem cells (hMSCs). Furthermore, the sulfated HA hydrogels promote the chondrogenesis and suppresses the hypertrophy of encapsulated hMSCs both in vitro and in vivo. Moreover, intra-articular injections of the sulfated HA hydrogels avert the cartilage abrasion and hypertrophy in the animal osteoarthritic joints. Collectively, our findings demonstrate that the sulfated HA is a promising biomaterial for the delivery of therapeutic agents to aid the regeneration of injured or diseased tissues and organs., Statement of Significance: In this paper, we conjugated sulfate groups to hyaluronic acid (HA) and demonstrated the slow degradation and growth factor delivery of sulfated HA. Furthermore, the in vitro and in vivo culture of hMSCs laden HA hydrogels proved that the sulfation of HA hydrogels not only promotes the chondrogenesis of hMSCs but also suppresses hypertrophic differentiation of the chondrogenically induced hMSCs. The animal OA model study showed that the injected sulfated HA hydrogels significantly reduced the cartilage abrasion and hypertrophy in the animal OA joints. We believe that this study will provide important insights into the design and optimization of the HA-based hydrogels as the scaffold materials for cartilage regeneration and OA treatment in clinical setting., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Due to avascular and hypocellular nature of cartilage, repair of articular cartilage defects within synovial joints still poses a significant clinical challenge. To promote neocartilage properties, we established a functional scaffold named APM-E7 by conjugating a bone marrow-derived mesenchymal stem cell (BM-MSC) affinity peptide (E7) onto the acellular peritoneum matrix (APM). During in vitro culture, the APM-E7 scaffold can support better proliferation as well as better differentiation into chondrocytes of BM-MSCs. After implanting into cartilage defects in rabbits for 24weeks, compared with microfracture and APM groups, the APM-E7 scaffolds exhibited superior quality of neocartilage without transplant rejection, according to general observations, histological assessment, synovial fluid analysis, magnetic resonance imaging (MRI) and nanomechanical properties. This APM-E7 scaffold provided a scaffold for cell attachment, which was crucial for cartilage regeneration. Overall, the APM-E7 is a promising biomaterial with low immunogenicity for one-step cartilage repair by promoting autologous connective tissue progenitor (CTP) attachment., Statement of Significance: We report the one-step transplantation of functional acellular peritoneum matrix (APM-E7) with specific mesenchymal stem cell recruitment to repair rabbit cartilage injury. The experimental results illustrated that the APM-E7 scaffold was successfully fabricated, which could specifically recruit MSCs and fill the cartilage defects in the femoral trochlear of rabbits at 24weeks post-surgery. The repaired tissue was hyaline cartilage, which exhibited ideal mechanical stability. The APM-E7 biomaterial could provide scaffold for MSCs and improve cell homing, which are two key factors required for cartilage tissue engineering, thereby providing new insights into cartilage tissue engineering., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Despite recent progress in enhancing axonal growth in the injured spinal cord, the guidance of regenerating axons across an extended lesion site remains a major challenge. To determine whether regenerating axons can be guided in rostrocaudal direction, we implanted 2mm long alginate-based anisotropic capillary hydrogels seeded with bone marrow stromal cells (BMSCs) expressing brain-derived neurotrophic factor (BDNF) or green fluorescent protein (GFP) as control into a C5 hemisection lesion of the rat spinal cord. Four weeks post-lesion, numerous BMSCs survived inside the scaffold channels, accompanied by macrophages, Schwann cells and blood vessels. Quantification of axons growing into channels demonstrated 3-4 times more axons in hydrogels seeded with BMSCs expressing BDNF (BMSC-BDNF) compared to control cells. The number of anterogradely traced axons extending through the entire length of the scaffold was also significantly higher in scaffolds with BMSC-BDNF. Increasing the channel diameters from 41μm to 64μm did not lead to significant differences in the number of regenerating axons. Lesions filled with BMSC-BDNF without hydrogels exhibited a random axon orientation, whereas axons were oriented parallel to the hydrogel channel walls. Thus, alginate-based scaffolds with an anisotropic capillary structure are able to physically guide regenerating axons., Statement of Significance: After injury, regenerating axons have to extend across the lesion site in the injured spinal cord to reestablish lost neuronal connections. While cell grafting and growth factor delivery can promote growth of injured axons, without proper guidance, axons rarely extend across the lesion site. Here, we show that alginate biomaterials with linear channels that are filled with cells expressing the growth-promoting neurotrophin BDNF promote linear axon extension throughout the channels after transplantation to the injured rat spinal cord. Animals that received the same cells but no alginate guidance structure did not show linear axonal growth and axons did not cross the lesion site. Thus, alginate-based scaffolds with a capillary structure are able to physically guide regenerating axons., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Tissue engineering promises to restore or replace diseased or damaged tissue by creating functional and transplantable artificial tissues. The development of artificial tissues with large dimensions that exceed the diffusion limitation will require nutrients and oxygen to be delivered via perfusion instead of diffusion alone over a short time period. One approach to perfusion is to vascularize engineered tissues, creating a de novo three-dimensional (3D) microvascular network within the tissue construct. This significantly shortens the time of in vivo anastomosis, perfusion and graft integration with the host. In this study, we aimed to develop injectable allogeneic collagen-phenolic hydroxyl (collagen-Ph) hydrogels that are capable of controlling a wide range of physicochemical properties, including stiffness, water absorption and degradability. We tested whether collagen-Ph hydrogels could support the formation of vascularized engineered tissue graft by human blood-derived endothelial colony-forming cells (ECFCs) and bone marrow-derived mesenchymal stem cells (MSC) in vivo. First, we studied the growth of adherent ECFCs and MSCs on or in the hydrogels. To examine the potential formation of functional vascular networks in vivo, a liquid pre-polymer solution of collagen-Ph containing human ECFCs and MSCs, horseradish peroxidase and hydrogen peroxide was injected into the subcutaneous space or abdominal muscle defect of an immunodeficient mouse before gelation, to form a 3D cell-laden polymerized construct. These results showed that extensive human ECFC-lined vascular networks can be generated within 7 days, the engineered vascular density inside collagen-Ph hydrogel constructs can be manipulated through refinable mechanical properties and proteolytic degradability, and these networks can form functional anastomoses with the existing vasculature to further support the survival of host muscle tissues. Finally, optimized conditions of the cell-laden collagen-Ph hydrogel resulted in not only improving the long-term differentiation of transplanted MSCs into mineralized osteoblasts, but the collagen-Ph hydrogel also improved an increased of adipocytes within the vascularized bioengineered tissue in a mouse after 1 month of implantation., Statement of Significance: We reported a method for preparing autologous extracellular matrix scaffolds, murine collagen-Ph hydrogels, and demonstrated its suitability for use in supporting human progenitor cell-based formation of 3D vascular networks in vitro and in vivo. Results showed extensive human vascular networks can be generated within 7 days, engineered vascular density inside collagen-Ph constructs can be manipulated through refinable mechanical properties and proteolytic degradability, and these networks can form functional anastomoses with existing vasculature to further support the survival of host muscle tissues. Moreover, optimized conditions of cell-laden collagen-Ph hydrogel resulted in not only improving the long-term differentiation of transplanted MSCs into mineralized osteoblasts, but the collagen-Ph hydrogel also improved an increased of adipocytes within the vascularized bioengineered tissue in a mouse., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

A critical challenge in tissue regeneration is to develop constructs that effectively integrate with the host tissue. Here, we describe a composite, laser micromachined, collagen-alginate construct containing human mesenchymal stem cells (hMSCs) for tissue repair applications. Collagen type I was fashioned into laminated collagen sheets to form a mechanically robust fascia that was subsequently laser micropatterned with pores of defined dimension and spatial distribution as a means to modulate mechanical behavior and promote tissue integration. Significantly, laser micromachined patterned constructs displayed both substantially greater compliance and suture retention strength than non-patterned constructs. hMSCs were loaded in an RGD-functionalized alginate gel modified to degrade in vivo. Over a 7 day observation period in vitro, high cell viability was observed with constant levels of VEGF, PDGF-β and MCP-1 protein expression. In a full thickness abdominal wall defect model, the composite construct prevented hernia recurrence in Wistar rats over an 8-week period with de novo tissue and vascular network formation and the absence of adhesions to underlying abdominal viscera. As compared to acellular constructs, constructs containing hMSCs displayed greater integration strength (cell seeded: 0.92 ± 0.19 N/mm vs. acellular: 0.59 ± 0.25 N/mm, p=0.01), increased vascularization (cell seeded: 2.7-2.1/hpf vs. acellular: 1.7-2.1/hpf, p<0.03), and increased infiltration of macrophages (cell seeded: 2021-3630 μm(2)/hpf vs. acellular: 1570-2530 μm(2)/hpf, p<0.05). A decrease in the ratio of M1 macrophages to total macrophages was also observed in hMSC-populated samples. Laser micromachined collagen-alginate composites containing hMSCs can be used to bridge soft tissue defects with the capacity for enhanced tissue repair and integration., Statement of Significance: Effective restoration of large soft tissue defects caused by trauma or treatment complications represents a critical challenge in the clinic. In this study, a novel composite construct was engineered and evaluated for stem cell delivery and tissue repair. Laser micromachining was used to fabricate patterned, microporous constructs designed with pores of defined size and distribution as a means to tune mechanical responses, accommodate and protect incorporated cells, and enhance tissue integration. The construct was embedded within an engineered alginate gel containing hMSCs. Upon repair of a full thickness abdominal wall defect in a rat model, the composite construct modulated host innate immunity towards a reparative phenotypic response, promoted neovascularization and associated matrix production, and increased the strength of tissue integration., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Clinical translation of tissue engineered therapeutics is hampered by the significant logistical and regulatory challenges associated with such products, prompting increased interest in the use of decellularized extracellular matrix (ECM) to enhance endogenous regeneration. Most bones develop and heal by endochondral ossification, the replacement of a hypertrophic cartilaginous intermediary with bone. The hypothesis of this study is that a porous scaffold derived from decellularized tissue engineered hypertrophic cartilage will retain the necessary signals to instruct host cells to accelerate endogenous bone regeneration. Cartilage tissue (CT) and hypertrophic cartilage tissue (HT) were engineered using human bone marrow derived mesenchymal stem cells, decellularized and the remaining ECM was freeze-dried to generate porous scaffolds. When implanted subcutaneously in nude mice, only the decellularized HT-derived scaffolds were found to induce vascularization and de novo mineral accumulation. Furthermore, when implanted into critically-sized femoral defects, full bridging was observed in half of the defects treated with HT scaffolds, while no evidence of such bridging was found in empty controls. Host cells which had migrated throughout the scaffold were capable of producing new bone tissue, in contrast to fibrous tissue formation within empty controls. These results demonstrate the capacity of decellularized engineered tissues as 'off-the-shelf' implants to promote tissue regeneration., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Pelvic organ prolapse is a major hidden burden affecting almost one in four women. It is treated by reconstructive surgery, often augmented with synthetic mesh. To overcome the growing concerns of using current synthetic meshes coupled with the high risk of reoperation, a tissue engineering strategy has been developed, adopting a novel source of mesenchymal stem cells. These cells are derived from the highly regenerative endometrial lining of the uterus (eMSCs) and will be delivered in vivo using a new gelatin-coated polyamide scaffold. In this study, gelatin properties were optimized by altering the gelatin concentration and extent of crosslinking to produce the desired gelation and degradation rate in culture. Following cell seeding of uncoated polyamide (PA) and gelatin-coated meshes (PA+G), the growth rate of eMSCs on the PA+G scaffolds was more than that on the PA alone, without compromising cell shape. eMSCs cultured on the PA+G scaffold retained their phenotype, as demonstrated by W5C5/SUSD2 (eMSC-specific marker) immunocytochemistry. Additionally, eMSCs were induced to differentiate into smooth muscle cells (SMC), as shown by immunofluorescence for smooth muscle protein 22 and smooth muscle myosin heavy chain. eMSCs also differentiated into fibroblast-like cells when treated with connective tissue growth factor with enhanced detection of Tenascin-C and collagen type I as well as new tissue formation, as seen by Masson's trichrome. In summary, it was demonstrated that the PA+G scaffold is an appropriate platform for eMSC delivery, proliferation and differentiation into SMC and fibroblasts, with good biocompatibility and the capacity to regenerate neo-tissue., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The transplantation of cells, such as mesenchymal stem cells (MSCs), has numerous applications in the field of regenerative medicine. For cell transplantation strategies to be successful therapeutically, cellular localization and persistence must be controlled to maximize cell-mediated contributions to healing. Herein, we demonstrate that hydrolytic degradation of poly(ethylene glycol) (PEG) hydrogels can be used to spatiotemporally control encapsulated MSC localization to decellularized bone allografts, both in vitro and in vivo. By altering the number of hydrolytically degradable lactide repeat units within PEG-d,l-lactide-methacrylate macromers, a series of hydrogels was synthesized that degraded over ∼1, 2 and 3weeks. MSCs were encapsulated within these hydrogels formed around decellularized bone allografts, and non-invasive, longitudinal fluorescence imaging was used to track cell persistence both in vitro and in vivo. Spatiotemporal localization of MSCs to the exterior of bone allograft surfaces was similar to in vitro hydrogel degradation kinetics despite hydrogel mesh sizes being ∼2-3 orders of magnitude smaller than MSC size throughout the degradation process. Thus, localized, cell-mediated degradation and MSC migration from the hydrogels are suspected, particularly as ∼10% of the total transplanted MSC population was shown to persist in close proximity (within ∼650μm) to grafts 7weeks after complete hydrogel degradation. This work demonstrates the therapeutic utility of PEG-based hydrogels for controlling spatiotemporal cell transplantation for a myriad of regenerative medicine strategies., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Nucleus pulposus (NP) tissue damage can induce detrimental mechanical stresses and strains on the intervertebral disc, leading to disc degeneration. This study demonstrates the potential of a novel, photo-curable, injectable, synthetic polymer hydrogel (pHEMA-co-APMA grafted with polyamidoamine (PAA)) to encapsulate and differentiate human mesenchymal stem cells (hMSC) towards a NP phenotype under hypoxic conditions which could be used to restore NP tissue function and mechanical properties. Encapsulated hMSC cultured in media (hMSC and chondrogenic) displayed good cell viability up to day 14. The genotoxicity effects of ultraviolet (UV) on hMSC activity confirmed the acceptability of 2.5min of UV light exposure to cells. Cytotoxicity investigations revealed that hMSC cultured in media containing p(HEMA-co-APMA) grafted with PAA degradation product (10% and 20%v/v concentration) for 14days significantly decreased the initial hMSC adhesion ability and proliferation rate from 24hrs to day 14. Successful differentiation of encapsulated hMSC within hydrogels towards chondrogenesis was observed with elevated expression levels of aggrecan and collagen II when cultured in chondrogenic media under hypoxic conditions, in comparison with culture in hMSC media for 14days. Characterization of the mechanical properties revealed a significant decrease in stiffness and modulus values of cellular hydrogels in comparison with acellular hydrogels at both day 7 and day 14. These results demonstrate the potential use of an in vivo photo-curable injectable, synthetic hydrogel with encapsulated hMSC for application in the repair and regeneration of NP tissue., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Synthetic bone substitutes are attractive materials for repairing a variety of bone defects. They are readily available in unlimited quantities, have a defined composition without batch variability and bear no risk of disease transmission. When combined with mesenchymal stem cells (MSCs), bone healing can be further enhanced due to the osteogenic potential of these cells. However, human MSCs showed considerable donor variability in ectopic bone formation assays on synthetic bone substitutes, which may limit clinical success. This study addresses whether bone formation variability of MSCs is cell-intrinsic or biomaterial-dependent and may be improved using biological bone substitutes with and without collagen. Ectopic bone formation of MSCs from nine donors was tested in immune-deficient mice on biological bone substitutes of bovine and equine origin, containing collagen (bHA-C; eHA-C) or not (bHA; eHA). Synthetic β-TCP was used for comparison. Histology of 8-week explants demonstrated a significant influence of the bone graft substitute (BGS) on donor variability of ectopic bone formation with best results seen for eHA-C (15/17) and β-TCP (16/18). Bone was of human origin in all groups according to species-specific in situ hybridization, but MSCs from one donor formed no bone with any bone substitute. According to histomorphometry, most neo-bone was formed on eHA-C with significant differences to bHA, eHA and β-TCP (p<0.001). Collagen-free biological BGSs were inferior to biological BGSs with collagen (p<0.001), while species-origin was of little influence. In conclusion, BGS composition had a strong influence on ectopic bone formation ability of MSCs, and biological BGSs with a collagen component seem most promising to display the strong osteogenic potential of MSCs., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

An optimal scaffold is crucial for osteochondral regeneration. Collagen and electrospun nanofibers have been demonstrated to facilitate cartilage and bone regeneration, respectively. However, the effect of combining collagen and electrospun nanofibers on osteochondral regeneration has yet to be evaluated. Here, we report that the combination of collagen and electrospun poly-l-lactic acid nanofibers synergistically promotes osteochondral regeneration. We first fabricated bi-layer microporous scaffold with collagen and electrospun poly-l-lactic acid nanofibers (COL-nanofiber). Mesenchymal stem cells were cultured on the bi-layer scaffold and their adhesion, proliferation and differentiation were examined. Moreover, osteochondral defects were created in rabbits and implanted with COL-nanofiber scaffold. Cartilage and subchondral bone regeneration were evaluated at 6 and 12weeks after surgery. Compared with COL scaffold, cells on COL-nanofiber scaffold exhibited more robust osteogenic differentiation, indicated by higher expression levels of OCN and runx2 genes as well as the accumulation of calcium nodules. Furthermore, implantation of COL-nanofiber scaffold seeded with cells induced more rapid subchondral bone emergence, and better cartilage formation, which led to better functional repair of osteochondral defects as manifested by histological staining, biomechanical test and micro-computed tomography data. Our study underscores the potential of using the bi-layer microporous COL-nanofiber scaffold for the treatment of deep osteochondral defects., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Outcomes after tendon repair are often unsatisfactory, despite improvements in surgical techniques and rehabilitation methods. Recent studies aimed at enhancing repair have targeted the paucicellular nature of tendon for enhancing repair; however, most approaches for delivering growth factors and cells have not been designed for dense connective tissues such as tendon. Therefore, we developed a scaffold capable of delivering growth factors and cells in a surgically manageable form for tendon repair. Platelet-derived growth factor BB (PDGF-BB), along with adipose-derived mesenchymal stem cells (ASCs), were incorporated into a heparin/fibrin-based delivery system (HBDS). This hydrogel was then layered with an electrospun nanofiber poly(lactic-co-glycolic acid) (PLGA) backbone. The HBDS allowed for the concurrent delivery of PDGF-BB and ASCs in a controlled manner, while the PLGA backbone provided structural integrity for surgical handling and tendon implantation. In vitro studies verified that the cells remained viable, and that sustained growth factor release was achieved. In vivo studies in a large animal tendon model verified that the approach was clinically relevant, and that the cells remained viable in the tendon repair environment. Only a mild immunoresponse was seen at dissection, histologically, and at the mRNA level; fluorescently labeled ASCs and the scaffold were found at the repair site 9days post-operatively; and increased total DNA was observed in ASC-treated tendons. The novel layered scaffold has the potential for improving tendon healing due to its ability to deliver both cells and growth factors simultaneously in a surgically convenient manner., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)