Search

The Tianyu Cu‐Ni sulfide deposit occurs in the north margin of the Central Tianshan Arc in East Tianshan orogenic belt, Xinjiang, NW China. The intrusions consist of gabbro, peridotite, and olivine pyroxenite. The peridotite and pyroxenite are the main host rock for the Cu‐Ni ores. Rhenium and osmium isotopic analyses of Ni‐ and Cu‐bearing sulfide minerals from the deposit have been used to determine the source of osmium, and by inference, the sources of ore metals. Sulfide ore samples have Os and Re concentrations varying in the ranges 1.85 to 4.58 ppb and 93.56 to 146.00 ppb, respectively. An initial 187Os/188Os ratio ranges from 0.86 to 1.23 for the ores and the γOs values from 592 to 2227. Osmium isotopic data suggest that the Tianyu intrusion and associated Cu‐Ni mineralization has derived from crustal‐contaminated mantle melts. The intrusions early show island‐arc geochemical signatures, which indicate that the Hulu mafic–ultramafic intrusions, along with the Cu‐Ni deposit, formed as a result of subduction of oceanic crust in the Early Permian. [ABSTRACT FROM AUTHOR]

Basic characteristics of Ordovician carbonate reservoir beds in the Lungudong region of northeastern part of the Tarim Basin are described in detail and the reservoir-forming conditions of oil and gas are preliminarily discussed in this paper by collecting and sorting out a large amount of data. The carbonate reservoir beds are mainly developed in open-platform and platform marginal facies; the reservoir beds have large changes in and low average values of physical property; the main type is fractured reservoir beds with the fracture-porous type second. The reservoir bed development is chiefly controlled by the distribution of sedimentary facies, tectonic activity and karstification. Whereas the accumulation and distribution of hydrocarbons in the region are controlled by an advantageous structural location, a good reservoir-caprock combination and a favorable transporting system, with the distribution characterized by zones horizontally and belts vertically, the oil and gas are mainly concentrated in areas with structural uplift, densely developed fractures, and surface karst, a vertical vadose zone, and a horizontal undercurrent belt of palaeokarst. [ABSTRACT FROM AUTHOR]

During the Late Paleozoic, West Junggar (Xinjiang, NW China) experienced a shift in tectonic setting from compression to extension. Ha'erjiao is an important area for investigating collisional structures, post–collisional structures, and magmatic activities. Based on the petrological and geochemical characteristics of pyroclastic and other volcanic rocks in the Permian Kalagang Formation from the borehole ZKH1205 in the Jimunai Basin, the main types of source rock for the pyroclastic rocks deposited in the basin are identified and their implications for the Early Permian tectonic setting examined. The abundance of basalt and andesite lithic fragments in the pyroclastic rocks, together with the REE characteristics and the contents of transition and high field strength elements show that the source rocks were chiefly intermediate–basic volcanic rocks. High ICV values, low CIA values, low Rb/Sr ratios, low Th/U ratios and the mineralogical features suggest weak chemical weathering of the source rocks; the geochemical patterns of the pyroclastic rocks might not only have been impacted by crustal contamination but also might be related to the nature of the magma from the source area. The geochemical properties of the pyroclastic rocks distinguish them from arc‐related ones, and such samples plot in the within‐plate basalt (WPB) field in some diagrams. This is consistent with the formation background of the Early Permian volcanic rocks in this region. [ABSTRACT FROM AUTHOR]

Two Upper Devonian to Lower Carboniferous sections, namely the Bulongguoer and Haer (Gennaren area) in the Junggar Basin, Central Asian Orogenic Belt, in northwestern China were examined with regard to ichnology and palynology. The deposits of the Hongguleleng Formation and Namu Member of the Heishantou Formation, respectively, are mostly unbioturbated or poorly bioturbated, with poorly diversified trace fossils, which indicate unfavourable conditions for the burrowing benthic community during the Late Devonian and Early Carboniferous. The main factor governing the growth of the bioturbating population was the rapid sedimentation of fine‐grained, volcanic material documented as tempestites, which buried the benthic fauna. In the Bulongguoer section, the presence of miospores Teichertospora torquata and Grandispora gracilis enabled identification of the broad Teichertospora torquata‐Grandispora gracilis Miospore Zone from the transitional Frasnian/Famennian interval. More accurate identification of palynostratigraphical levels (DE and CZ Miospore zones) is only tentative. On the basis of palynofacies analysis, samples from the lower Bulongguoer section indicate deposition in more proximal conditions, whereas samples from the top of the section indicate deposition in a more distal environment. In the Haer section, only a general biostratigraphic indication for the Tournaisian was possible, owing to poor preservation of organic matter. [ABSTRACT FROM AUTHOR]

The Gas Hure Salt Lake (GHSL) in the northwestern Qaidam Basin, western China, is rich in boron (B) resources, but its B‐resource origin is hardly known. Hydrochemical compositions and B isotope characteristics of different waters were collected around the GHSL, including the river water, stream water, spring water, salt‐lake brine, intercrystalline brine, well water, drilling brine, and solar pond brine. The hydrochemical signatures suggest that silicates, carbonates and evaporates are the main B‐bearing rocks during the water dynamic. The reservoir estimation of B resources shows that the Kulamulekesay River (KLMR) and the Atekan River (ATKR) contribute annually 18.3 tons and 22.84 tons of B, respectively, with a total amount of 11.72 × 104 tons of B during the past 5.7 ka. In comparison with the known B reservoir (32.96 × 104 tons) in the GHSL, a significant amount of B in the GHSL was probably recharged from deep fluids and sediments around the GHSL. The B concentration and B‐enrichment degree are shaped by the evaporation process, which are highly elevated at the carnallite and bischofite stages. [ABSTRACT FROM AUTHOR]

The micro‐nano pore structure of conglomerate in the Lower Karamay Formation of the Xinjiang Oilfield, Junggar Basin, northern China is characterized to predict its impact on fluid reserves and seepage. Authigenic clay minerals are mainly kaolinite (67%), followed by an illite/smectite mixed layer (18%), illite (10%), and chlorite (5%). For kaolinite, pore throats between 0–200 nm are dominant, accounting for 90% of the total pore throats. For illite/smectite mixed layer, pore throats also between 0–200 nm account for nearly 80%, while pore throats between 200‐500 nm only account for 15%. For illite, pore throats below 100 nm account for about 80%, while pore throats in the range of 100–500 nm only account for 20%. For chlorite, most throats are below 200 nm. The pore roundness of illite is the highest, while the pore roundness of chlorite is relatively lower. The lower limits of the dynamic and static pore throat radii are 42.128 nm and 72.42 nm, respectively. The theoretical contribution rates of the illite/smectite mixed layer, kaolinite, illite and chlorite to storage/seepage are 60%/45.86%, 52.72%/38.18%, 37.07%/28.78% and 32.97%/26.3%, respectively. Therefore, the contribution rates of clay minerals in the study area are as follows: illite/smectite mixed layer, kaolinite, illite and chlorite. [ABSTRACT FROM AUTHOR]

On 21 March 2008, a Ms7.3 earthquake occurred at Quickbird, Yutian County, Xinjiang. We attempt to reveal the features of the causative fault of this shock and its coseismic deformation field. Our work is based on analysis and interpretation to high-resolution satellite images as well as differential interferometric synthetic aperture radar (D-InSAR) data from the satellite Envisat SAR, coupled with seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 40 km-long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in Qira County. It is characterized by distinct linear traces and simple structure with 1-3-m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone many secondary fractures and fault-bounded blocks are seen, exhibiting remarkable extension. The coseismic deformation affected a large area 100 × 100 km2. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. Because of the big deformation gradients near the seismogenic fault, no interference fringes are seen on images, and what can be determined is a vertical displacement 70 cm or more between the two fault walls. According to the epicenter and differential occurrence times from the National Earthquake Information Center, China Earthquake Network Center, Harvard and USGS, it is suggested that the seismic fault ruptured from north to south. [ABSTRACT FROM AUTHOR]