Search

This paper presents the results of field tests performed to investigate the compressive bearing capacity of pre-bored grouted planted (PGP) pile with enlarged grout base focusing on its base bearing capacity. The bi-directional O-cell load test was conducted to evaluate the behavior of full scale PGP piles. The test results show that the pile head displacements needed to fully mobilize the shaft resistance were 5.9% and 6.4% D (D is pile diameter), respectively, of two test piles, owing to the large elastic shortening of pile shaft. Furthermore, the results demonstrated that the PHC nodular pile base and grout body at the enlarged base could act as a unit in the loading process, and the enlarged grout base could effectively promote the base bearing capacity of PGP pile through increasing the base area. The normalized base resistances (unit base resistance/average cone base resistance) of two test piles were 0.17 and 0.19, respectively, when the base displacement reached 5% Db (Db is pile base diameter). The permeation of grout into the silty sand layer under pile base increased the elastic modulus of silty sand, which could help to decrease pile head displacement under working load. [ABSTRACT FROM AUTHOR]

This paper presents the results of field tests performed to investigate the behavior of pre-bored grouted planted nodular (PGPN) pile embedded in deep clayey soil. The test piles were all instrumented to measure the shaft and tip resistance and to determine the load transfer along the pile shaft. The test results show that the displacement necessary to fully mobilize the shaft resistance of PGPN pile is in the range of 1.83–3.32% D (D is pile diameter), and that the ultimate skin frictions of grout–soil interface of different soil layers are larger than the conventional proposed ultimate skin frictions for non-displacement piles. Furthermore, the pile tip resistance accounts for about 16% of the total applied pile head load corresponding to a pile head displacement of 0.1 D, and the pile tip resistance continues to increase after tip displacement reaches 5% of pile tip diameter. [ABSTRACT FROM AUTHOR]