Search

Deformation behaviour of multicomponent metallic glasses are determined by the evolution/reconfiguration of the short- and medium-range order (SRO and MRO) atomic structures. A precise understanding of how different atom species rearrange themselves in different stress states is still a great challenge in materials science and engineering. Here, we report a systematic and synergetic research of using electron microscopy imaging, synchrotron X-ray total scattering plus empirical potential structure refinement (EPSR) modelling to study in situ the deformation of a Zr-based multicomponent metallic glassy alloy with 5 elements. Systematic and comprehensive analyses on the characteristics of the SRO and MRO structures in 3D and the decoupled 15 partial PDFs at each stress level reveal quantitatively how the SRO and MRO structures evolve or reconfigure in 3D space in the tensile and compressive stress states. The results show that the Zr-centred atom clusters have low degree of icosahedra and are the preferred atom clusters to rearrange themselves under the tensile and compressive stresses. The Zr-Zr is the dominant atom pair in controlling the shear band's initiation and propagation. The evolution and reconfiguration of the MRO clusters under different stress states are realised by changing the connection modes between the Zr-centred atom clusters. The coordinated changes of both bond angles and bond lengths of the Zr-centred clusters are the dominant factors in accommodating the tensile or compressive strains. While other solute-centred MRO clusters only play minor roles in the atomic structure reconfiguration/evolution. The research has demonstrated a synergetic and multimodal materials operando characterization methodology that has great application potential in design and development of high performance multiple-component engineering alloys. [Display omitted] [ABSTRACT FROM AUTHOR]

The structures of atomic clusters and GP-zones preceding precipitation in an Al-0.70Mg-0.85Si-0.15Fe-0.25Mn (wt. %) alloy have been investigated by annular dark field scanning transmission electron microscopy imaging and density functional theory calculations. One analysed condition consisted of one-month natural aging, and another was in a pre-baked state after 24 h aging at 90 °C. To quantify the effect of clusters and GP-zones on microstructure development during a subsequent isothermal artificial aging at 185 °C, hardness evolution was measured, and precipitate statistics was performed at the peak hardness corresponding to 5 h aging. Several types of clusters and GP-zones have been observed and based on structure and visual appearance named 'Disordered Frank-Kasper', 'Square', 'Binocular', and 1β", 2β", 3β", 4β". The first four are most common in the natural aged condition and are associated with a well-known influence on the initial hardness evolution. The last three are fractions of the hardening β" phase and refer to the number of structural units they contain. These GP-zones have an increased density in the pre-baked condition, leading to a rapid increase in hardness during artificial aging and to a finer microstructure of high-density small needle precipitates at peak hardness. [Display omitted] [ABSTRACT FROM AUTHOR]

The atomic structures of Cu-Zr alloys have been extensively studied due to the unusually high glass forming ability of this system. In this work, we investigate the nearest-neighbor atomic structures of several simulated disordered Cu-Zr compositions at three temperatures: 1450 K (liquid), 700 K (undercooled liquid), and 350 K (disordered solid). The results show that over 90 % of the local structures in these systems can be described by one of 12 "building-block" atomic cluster geometries, regardless of composition or temperature, and that these structures all exhibit icosahedral or quasi-icosahedral geometries. Most of the building-blocks are unique in their combination of representative Voronoi polyhedron geometry, predominant central atom type, and occupation probability for each site in the cluster. In addition to the 12 common building-blocks, 35 "outlier" structures unique to their simulated compositions and temperatures were observed. The outliers were primarily non-icosahedral. While the populations of the common building-blocks do not exhibit clear trends with temperature or composition, the overall population of outliers increased with decreasing temperature, suggestive of their role in accommodating the lack of translational order in the disordered solid. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: The present work develops a physical model of metallic glass structure that gives a reasonable estimate of density. The efficient cluster-packing model is used as a starting point, and is refined by a high-fidelity estimate of the size of structure-forming clusters and cluster–cluster separations. These are predicted as continuous functions of composition and relative atom radii. Predicted densities are all are within ±10% of measured densities for 200 binary metallic glasses, representing a precision in cluster–cluster separations of ±3%. New structural insights from this work include the importance of acknowledging the unique cluster topologies to estimate cluster–cluster separations; an improved ability to estimate the higher packing efficiency of unlike atoms in the first coordination shell of atomic clusters; and an improved estimate of metalloid–metalloid separations. The unusual, bilinear influence of composition on density in Fe–B glasses is explained by considering the sizes of β and γ sites in different metallic glass structures. Global atom packing fractions derived from measured densities range from about 0.62 to 0.76, and the most stable binary glasses all have packing fractions in excess of 0.70, supporting the idea that atom packing efficiency influences glass stability. [Copyright &y& Elsevier]