Search

Owing to the bandgap‐bowing effect, mixed lead‐tin halide perovskites provide ideal bandgaps for the bottom subcell of all‐perovskite tandem photovoltaic devices that offer fundamentally elevated power‐conversion efficiencies. However, these materials suffer from degradation in ambient air, which worsens their optoelectronic properties and hinders their usability for photovoltaic applications. Such degradation pathways are not yet fully understood, especially for the perovskites in the middle of the APbxSn1‐xI3 solid solution line, which offer the narrowest bandgaps across the range. This study unravels the degradation mechanisms of APbxSn1‐xI3 perovskites, reporting clear differences between mixed lead‐tin (x = 0.5) and tin‐only (x = 0) perovskites. The dynamic optoelectronic properties, electronic structure, crystal structure, and decomposition products of the perovskite thin films are examined in situ during air exposure. Both perovskite compositions suffer from the formation of defects over the timescale of hours, as indicated by a significant reduction in their charge‐carrier diffusion lengths. For tin‐only perovskite, degradation predominantly causes the formation of energetically shallow tin vacancies and hole doping. However, for mixed lead‐tin perovskite, deep trap states are formed that significantly accelerate charge‐carrier recombination, yet leave mobilities relatively unaffected. These findings highlight the need for passivation strategies tailored specifically to mixed lead‐tin iodide perovskites. [ABSTRACT FROM AUTHOR]

Mixed‐halide perovskites are essential for use in all‐perovskite or perovskite–silicon tandem solar cells due to their tunable bandgap. However, trap states and halide segregation currently present the two main challenges for efficient mixed‐halide perovskite technologies. Here photoluminescence techniques are used to study trap states and halide segregation in full mixed‐halide perovskite photovoltaic devices. This work identifies three distinct defect species in the perovskite material: a charged, mobile defect that traps charge‐carriers in the perovskite, a charge‐neutral defect that induces halide segregation, and a charged, mobile defect that screens the perovskite from external electric fields. These three defects are proposed to be MA+ interstitials, crystal distortions, and halide vacancies and/or interstitials, respectively. Finally, external quantum efficiency measurements show that photoexcited charge‐carriers can be extracted from the iodide‐rich low‐bandgap regions of the phase‐segregated perovskite formed under illumination, suggesting the existence of charge‐carrier percolation pathways through grain boundaries where phase‐segregation may occur. [ABSTRACT FROM AUTHOR]

Highest reported efficiency cesium lead halide perovskite solar cells are realized by tuning the bandgap and stabilizing the black perovskite phase at lower temperatures. CsPbI2Br is employed in a planar architecture device resulting in 9.8% power conversion efficiency and over 5% stabilized power output. Offering substantially enhanced thermal stability over their organic based counterparts, these results show that all‐inorganic perovskites can represent a promising next step for photovoltaic materials. [ABSTRACT FROM AUTHOR]

Halide perovskites are currently one of the most heavily researched emerging photovoltaic materials. Despite achieving remarkable power conversion efficiencies, perovskite solar cells have not yet achieved their full potential, with the interfaces between the perovskite and the charge‐selective layers being where most recombination losses occur. In this study, a fluorinated ionic liquid (IL) is employed to modify the perovskite/SnO2 interface. Using Kelvin probe and photoelectron spectroscopy measurements, it is shown that depositing the perovskite onto an IL‐treated substrate results in the crystallization of a perovskite film which has a more n‐type character, evidenced by a decrease of the work function and a shift of the Fermi level toward the conduction band. Photoluminescence spectroscopy and time‐resolved microwave conductivity are used to investigate the optoelectronic properties of the perovskite grown on neat and IL‐modified surfaces and it is found that the modified substrate yields a perovskite film which exhibits an order of magnitude lower trap density than the control. When incorporated into solar cells, this interface modification results in a reduction in the current–voltage hysteresis and an improvement in device performance, with the best performing devices achieving steady‐state PCEs exceeding 20%. [ABSTRACT FROM AUTHOR]