Search

Tin-lead (Sn-Pb) narrow-bandgap (NBG) perovskites show great potential in both single-junction and all-perovskite tandem solar cells. Sn-Pb perovskite solar cells (PSCs) are still limited by low charge collection efficiency and poor stability. Here, a ternary Sn (II) alloy of SnOCl is reported as the hole-transport material (HTM) with a work function of 4.95 eV for Sn-Pb PSCs. The solution-processed SnOCl layer has a texture structure that not only reduces the optical loss of the devices, but also changes grain growth of Sn-Pb perovskites and boosts the carrier diffusion length to 3.63 µm. The formation of small perovskite grains at the HTM/perovskite interface is suppressed. These result in an almost constant internal quantum efficiency (IQE) of 96 ± 2% across the absorption spectrum of Sn-Pb perovskites. The SnOCl HTM significantly enhances the stability of Sn-Pb PSCs with 87% of its initial efficiency retained after 1-sun illumination for 1200 h, and keeps 85% efficiency under 85 °C thermal stress for 1500 h. The hybrid HTM further improves the stabilized efficiencies of single-junction Sn-Pb PSCs and all-perovskite tandem solar cells to 23.2% and 25.9%, respectively. This discovery opens an avenue to the multicomponent metal alloys as HTM in PSCs., (© 2022 Wiley-VCH GmbH.)

Perovskite solar cells (PSCs) are promising to reduce the cost of photovoltaic system due to their low-cost raw materials and high-throughput solution process; however, fabrication of all the active layers in perovskite modules using a scalable solution process has not yet been demonstrated. Herein, the fabrication of highly efficient PSCs and modules in ambient conditions is reported, with all layers bladed except the metal electrode, by blading a 36 ± 9 nm-thick electron-transport layer (ETL) on perovskite films with a roughness of ≈80 nm. A combination of additives in phenyl-C 61 -butyric acid methyl ester (PCBM) allows the PCBM to conformally cover the perovskites and still have a good electrical conductivity. Amine-functionalized molecules are added to enhance both the dispersity of PCBM and the affinity to perovskites. A PCBM dopant of 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) recovers the conductivity loss induced by the small amine molecules. PSCs (0.08 cm 2 ) fabricated by the all-blading process reache an average efficiency of 22.4 ± 0.5% and a champion efficiency of 23.1% for perovskites with a bandgap of 1.51 eV, with much better stability compared to evaporated ETL PSCs. The all-bladed minimodule (25.03 cm 2 ) shows an aperture efficiency of ≈19.3%, showing the good uniformity of the bladed ETLs., (© 2022 Wiley-VCH GmbH.)

Ternary organic solar cells are promising alternatives to the binary counterpart due to their potential in achieving high performance. Although a growing number of ternary organic solar cells are recently reported, less effort is devoted to morphology control. Here, ternary organic solar cells are fabricated using a wide-bandgap polymer PBT1-C as the donor, a crystalline fused-ring electron acceptor ITIC-2Cl, and an amorphous fullerene derivative indene-C 60 bisadduct (ICBA) as the acceptor. It is found that ICBA can disturb π-π interactions of the crystalline ITIC-2Cl molecules in ternary blends and then help to form more uniform morphology. As a result, incorporation of 20% ICBA in the PBT1-C:ITIC-2Cl blend enables efficient charge dissociation, negligible bimolecular recombination, and balanced charge carrier mobilities. An impressive power conversion efficiency (PCE) of 13.4%, with a high fill factor (FF) of 76.8%, is eventually achieved, which represents one of the highest PCEs reported so far for organic solar cells. The results manifest that the adoption of amorphous fullerene acceptor is an effective approach to optimizing the ternary blend morphology and thereby increases the solar cell performance., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A highly efficient fullerene-free polymer solar cell (PSC) based on PDCBT, a polythiophene derivative substituted with alkoxycarbonyl, achieves an impressive power conversion efficiency of 10.16%, which is the best result in PSCs based on polythiophene derivatives to date. In comparison with a poly(3-hexylthiophene):ITIC-based device, the photovoltaic and morphological properties of the PDCBT:ITIC-based device are carefully investigated and interpreted., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A well-organized donor-acceptor crystalline structure is examined for high -performance nonfullerene solar cells. By thermal annealing, nanoscale structures of both donor and acceptor domains are successfully modulated, followed by -significant changes in the resulting -photovoltaic characteristics. When annealed at 90 °C, a maximum power conversion efficiency of 7.64% with a -remarkable open-circuit voltage of 1.03 V is obtained., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)