Search

The aim of this study was to study the morphology and structural characteristic of NCC hydrolyzed from filter paper. The NCCs were extracted by acid hydrolysis at 50°C for 1 hour, using 55% conc. H2SO4 under vigorous mechanical stirring, centrifugation at 12000 rpm in distillate water and followed by homogenizing at 7000 rpm. The morphology and surface profiles of the NCC suspension was characterized using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The crystalline structure of the NCC was evaluated by using X-ray diffraction (XRD) technique. As a result, hydrolysed NCC was found to have a rod liked shape with diameter in the range of 100-300nm length and 10-50nm width, with the aspect ratio value of 10.3 nm. According to XRD investigations, the semi-crystalline cellulose was observed with the presence of an amorphous broad hump and crystalline peaks at 2θ of 15o and 22.7o, respectively. The crystalinity index of the raw filter paper was calculated as 86.7 % and increased to 94.4 % as it was extracted to NCC. Crystallite size of raw filter paper and NCC was calculated as 20.6 nm and 11.4 nm, respectively

The agriculture waste material can give benefit to many production industries. The studied crop is corn (Zea Mays) stalk. The objective of this work was to analysis the chemical composition; to study chemical pulping and papermaking properties of corn stalk and; to investigate the fiber morphology of properties of those crops. Firstly, the chemical composition of corn stalk were determined and compared with other non-woods. After that, chemical corn stalk was conducted in this analysis followed the physical and mechanical properties. The result showed that, corn stalk have cellulose (39.0%) and lignin content is the lowest (7.3%) content rather than other composition. In chemical pulping, reached high pulp yields had been produced and the strength properties: tear index, tensile index, burst and fold verified that they were of an acceptable quality for papermaking. This crop morphology was observed by Scanning Electron Microscopic (SEM), which showed a condensed composition of fiber structure. This study can developed a friendly product and promote the green technology, suitable to be used as an alternative pulp in paper making industry.Keywords: Fiber, Corn stalk, Composition, Green technology, Pulp and paper making.

In this paper, Kevlar or Polysulfonamide (PSA) pulp were used to replace plant fiber pulp partially or completely and by adjusting their ratios and a variety of Kevlar or PSA pulp reinforced activated carbon fiber paper (ACFP) were prepared via wet-laid paper making technology. The influences of addition of Kevlar or PSA pulp on the permeability, mechanical property, filtration performance, adsorption property of ACFP were discussed by maintaining the addition content of activated carbon fiber unchanged. Results showed that with the addition content of Kevlar or PSA pulp increased, the permeability and filtration performance of ACFP decreased obviously, while the bursting strength and the static CCl4 adsorption performances were firstly increased and then decreased. Generally, the permeability and filtration performance of Kevlar pulp reinforced ACFP were slightly worse than that of PSA pulp reinforced ACFP, while the bursting strength as well as the static CCl4 adsorption properties of Kevlar pulp reinforced ACFP were better than that of PSA pulp reinforced ACFP.

The wettability of the carbon composite electrode on paper substrate was studied using contact angle measurement. Y-Shield HSF54 carbon composite material were coated on paper substrates with a mask using squeegee coating technique. Contact angles of the ten polar probe liquids with the HSF54 electrodes were measured using a customed-built image acquisition system. With the contact angles obtained for each probe liquid placed on the electrodes, the surface tension of the electrodes was determined using Fox-Zisman theory. The result showed that the critical surface tension of HSF54 carbon composite electrodes was 37.2 mN/m which is considered to be moderately hydrophobic.

Paper acidification has become a serious problem in the world and deacidification is an effective way to extend the life of the paper documents. This essay introduced the acidification of the paper documents and the regular methods of deacidification at present. It surveyed the deacidification technologies in Europe and America countries and the progress of decacidification research programs in China, and then proposed the opinions on R&D and promotion of paper document acidification technology in China.

Super absorbent polymer (SAP) and fluff pulp were used as absorbing materials, and the different SAP mass ratio and fluff pulp were applied to paper diaper absorption core layer. Then, the influence of different SAP/fluff pulp in composite core layer on the paper diapers normal saline absorption rate and topsheet run-off were studied. Results showed that SAP has a significant effect on normal saline absorbency respect to fluff pulp. When the normal saline volume increased, the paper diapers absorption rate about normal saline decreased, while the topsheet run-off increased. When the SAP mass ratio to fluff pulp was 0.5:0.5, the liquid absorbency rate was 35.23 g/g, the paper diaper average absorption rate was 3.96 mL/s, and the biggest topsheet run-off was 13.25 g.

Steel slag, a kind ofindustrial residues, is generated in the process of steel-making. Paper sludgeis the final material which origins from the treatment of liquid waste. Allthese resulted in a serious pollution of environment, how to achieve thecoordinate development among enterprise, environment and society become apressing matter of the moment. Based on this, Circular economy becomenecessary. Based on circular economy, the two kinds of industrial wastes weremixed to manufacture useful materials through carbonation in this research. Therequired raw materials were mixed by mortar mixer at the specified mixingratio. Then the mixture was transferred to a stainless steel mould formanufacturing of rectangular composite specimens. Only in this way, It is toshift from the paper maunfacturing and ironmaking and steelmaking industrywhich is over-consumption of energy and natural resources and very seriousenvironmental pollution to the industry which is less pollution and thedevelopment of multi-part cycle.

A device has been designed to measure the whole stiffness which is behalf of paper plate’s carrying capacity. When the device was working, one end of the paper plate was hold as a hand did, the other end of the paper plate was pushed to 15°angle from the horizontal surface, and the force on the paper plate was recorded. Comparing load-bearing performance, the whole stiffness is more accurate to reveal the differences of the paper plates.

Paper material has many excellent characteristics in architectural applications. Our main constructions for disaster rescue are temporary tents, board house and so on for a long time, so it is difficult to meet the psychological demands of the people in disaster area. According to Maslow's hierarchy theory of psychological demands, this paper analyzes people’s demands of physiology, psychology and social aspects in disaster areas, also sums up the exploration of paper material in architectural application, and finally summarizes that paper material is economy, flexible, safety, sustainable and so on.

Fe-pillared bentonite was made into a paper-like composite by a papermaking technique using pulp fiber and activated carbon fiber. Orange II was used as a model compound to investigate the photocatalytic performance of the paper. SEM analysis showed that the catalytic paper had a porous structure originating from the layered fiber network, with Fe-pillared bentonite mostly embedded in the grooves along the axial direction of the carbon fibers. The optimum preparation conditions were: activated carbon fiber:Fe-pillared bentonite=1:2, activated carbon fiber:pulp fiber=5:3, the charges of Na2SiO3 and PAE were 2.5% based on the Fe-pillared bentonite and 0.4% based on the oven-dry fibers, respectively. The degradation ratio reached 85.2% at 180 min and after that little increase was observed. The catalyst could be repeatedly use and keep a high stability during the first 4 cycling use.

Measuring the influence of academic research publication is an meaningful work in academe. In this paper, the co-author and the citation networks are built to calculate the influence of a researcher and a paper in the way of networks separately with the discussion of further applications. At the beginning, the co-author network is built to determine the influence of co-authors. Then, based on the citations among the papers in the database, we build up the citation network with the help of graph theory. Thirdly, the method is implemented with the application of American Airline network analysis. As the final, the analysis of strengths and weaknesses is conducted.

English, as one of the most important information carriers, has become the most widely used language worldwide, and its importance is increasingly prominent in each field of our society. Examinations are an important means of evaluating the level of English language learning and teaching outcomes. For the problems existed in traditional English exam, this paper research English online examination system intelligent test paper based on random algorithm. First, the design test paper constraints, including the question amount constraint, questions type constraints, knowledge point constraints, difficulty constraints, answer time constraints and so on; Then, using the linear congruence generator study of a random number generation, list recursive formula and describe parameters; Finally, using flow diagram to study random test paper process, for each step describing in detail. Advantages of random algorithm are easy to use, the disadvantage is not retrospective, applies to the number of exam papers and extraction requirements are relatively few cases.

The aim of this research was to produce three-layer Medium Density Particleboard (MDP), with the addition of impregnated paper, in the inner layer, in proportions of 1; 5 and 20%. In this study, MDP was composed with particles of small size in outer layers, and larger particles in internal layer. After panel manufacturing, physical and mechanical tests based on Brazilian Code ABNT NBR 14.810 were carried out to determine moisture content; density; thickness swelling; water absorption; modulus of rupture (MOR) and modulus of elasticity (MOE) in static bending and internal adhesion. Test results were compared to commercial panels, produced with 100% Eucalyptus, considering the requirements specified by Brazilian Code. Properties presented values close to normative specifications, indicating positively the possibility of production of MDP using addition of waste paper impregnated.

Homemade water in water cationic polyacrylamide (CPAM) emulsion was applied in cigarette paper pulp as dry strengthening agent with other strengthening agent. Good collaborative effect was achieved when CPAM was used in bleached wheat straw pulp with strengthening agent E and with cationic additives L as paper pulp strengthening agent. It was also showed that distinct strengthening effect was obtained when CPAM emulsion was applied in mixture of bleached needle kraft pulp (NBKP) and wheat straw pulp, breaking length and tearing index of cigarette handsheet made of mix pulp was respectively increased by 22.2% and17.0% when the dosage of CPAM was 0.8% of dry fiber. Through analysis of cigarette handsheet section scanning electron microscopy (SEM) photos, strengthening mechanism of CPAM emulsion to cigarette paper pulp was preliminary studied.

The curriculum construction is a very important work leading to the excellent course. Processing Technology of Paper Box and Carton (including 32 class hours) is a new elective course to the printing engineering in our college. It is very important and necessary to construct the course in time. At first, the current states and difficulties were introduced in the paper, which was that teaching contents, teaching courseware and teacher team should be all improved. Especially, the teaching content proportion on both paper box and carton was set. And then the ideas and ways used for building up the curriculum system are presented as integrating the teaching contents, reforming the teaching mode and strengthening the teaching management. Finally, the significance of carrying out the teaching reform was put forward, and the achievements of course construction should be applied to the usual teaching work. The curriculum Processing Technology of Paper Box and Carton was reckoned as the excellent curriculum of Beijing Institute of Graphic Communication in 2013.

With rapid increase of waste paper recycling, more and more researchers focus on the advanced technologies of sorting impurities form waste paper. The principals of main identification and sorting technologies are introduced in this paper, whose advantages and disadvantages are discussed. Because of importance of sorting technologies based on near-infrared spectroscopy, we emphasis its principle, application and research status etc.. At last, research and development tendency of identification and sorting technology are prospected.

A statistical analysis is made on papers published in Geomatics and Information Science of Wuhan University from 2001 to 2010 in terms of the number of published papers, the statistics of key words frequency, the number of published papers of authors, the regional distribution of authors, the number of co-authored papers, the added number of paper authors and active author group. The research direction of geomatics and the scale and trend in which geomatics researchers have cooperated in past ten years is represented. It is reflected that the Journal has played an important role in the information transmission, experience exchange, talents training and the improvement and development of China’s geomatics cause.

Based on the study of dielectric response theory and equivalent circuit of oil-paper insulation medium, this paper deduces the exponential decay type return voltage function model.It also proposes that rhe function can be resolved with the application of optimization algorithm. Finally, the paper takes a return voltage curve which is tested by the oil-immersed transformer for example.Fitting results verify the accuracy of the calculation. Further more,it also explains that return voltage function model is reliable and practical. Therefore,the model plays a crucial role in the follow-up study of topological structure of equivalent circuit of oil-paper insulation.

In this paper, a kind of fibrous TiO2 has been prepared through hydrothermal synthesis and a paper fabricated from the fibrous TiO2 has been obtained. The composition, morphology, and size of the fibrous TiO2 were characterized by using X-ray diffraction (XRD) and scanning electron microscope (SEM) respectively. And the morphology of the paper was characterized by polarizing microscope. The thickness, softness, and writing properties of the paper were detected by a vernier caliper and a pen. The results indicate that the diameter of the fibrous TiO2 is ~ 200 nm, the thickness of the fabricated paper is ~ 0.35 mm, and the paper can be tolerated writing by a UM-100 ball pen. The excellent properties of the prepared paper may change the applications of fibrous TiO2 in papermaking industry.

There are high organic matter and cation exchange capacity (CEC) in paper mill sludge, which can be used efficiently to amend soil properties and promote the growth of crops. The batch method was used to investigate effects of paper sludge on adsorption and desorption of Cd (II) and Pb (II) in two types paddy soil (red soil, purple soil), through adding paper sludge to red soil and purple soil. The results showed that isothermal sorption process of Cd (II) and Pb (II) by soils and paper sludge could be well described by Langmuir equation and Freundlich equation, and all coefficients (r) were higher than 0.9. The purple soil had a higher sorption capacity of Cd (II) and Pb (II) than red soil. The sorption capacities of Cd (II) and Pb (II) in soils increased after added paper sludge, and they reached adsorption equilibrium as the percentages of paper sludge were 10%, 1% in red soil and purple soil, respectively. The desorption capacities of Cd (II) and Pb (II) in soils decreased after added paper sludge, and they reached minimum as the percentages of paper sludge were 5%, 2% in red soil and purple soil, respectively. It was better to immobilize Cd (II) and Pb (II) after added paper sludge, thus paper mill sludge can relieve the migration of heavy metals in soil-crop systems. It can provide a new way for safe using of heavy metal contaminated soil and resource utilization of paper sludge.

Paper industry produces large amounts of sludge with about 65wt% moisture content. Due to its complex composition, the charge of traditional disposal method is high and easy to bring about secondary pollution. In this paper, the influences of temperature, oxidation coefficient and residence time on the performance of supercritical water oxidation (SCWO) of paper mill sludge were investigated. The results show that SCWO can almost completely eliminate organics in sludge and obtain transparent liquid products meeting relative national standards at 550°C, 5min with an oxidation coefficient of 3.0. However, during this process, TN changes to NH3-N, so NH3-N in liquid products increases with operation parameters, indicating the recalcitrant nature of NH3-N, and which needs further treatment.

Due to a shortage of wood source fibre in paper making industrys interest to agriculture residues fibre as a potential fibre sources in this industry. In this situation, importance has been developing in the paper industry from agriculture residue that will replace the wood fibre. Cocoa pod husk and Corn stalk are agriculture residues, which is good materials for paper production. The objectives of this study are to investigate the chemical characterization and surface morphology structure of these materials. The main components of materials which are cellulose, hemicellulose, lignin and ash content were parameters that involved in determination of chemical characterization in this study. The determination of chemical composition was accordance to Kurshner-Hoffner approach (cellulose), Chlorine Method (hemicellulose), T 222 om-06 (lignin) and T 211 om-07 (ash content). Scanning electron microscopy was used to observe the surface structure of materials. From results obtained, corn stalk shows the higher amount in cellulose (39%) and hemicellulose (42%) content compared to the cocoa pod husk. In addition, lower lignin content also obtained in Corn stalk (7.3%) rather than that Cocoa pod husk (14.7%). From Scanning electron microscopy images, Corn stalk and Cocoa pod husk contained abundance lignocellulosic and rough surface structure due to the untreated materials. The result either chemical characterization or surface morphology that obtained in Corn stalk and Cocoa pod husk fibre wastes can be used successfully as an alternative fibres sources in papermaking application.

The structure of the coating layer has a strong influence on the optical and physical properties of paper as well as on the print quality. Ink is transferred and sets onto the paper surface in the printing process, which affect printing quality and usage of ink. The objective of this experiment was to investigate the influence of calender on coating surface structure and Printability. The surface structure was explored in the method of numerical and visual analysis using mercury porosimetry measurement and scanning electron microscopy (SEM). The findings indicated that the calender treatment affected the pore size, depth and distribution of the coated paper surface. It could be concluded that Calender could increase the smoothness, gloss and paper surface efficiency of coated paper, which resulted in lower amount of ink usage, lower amount of ink absorption and higher print density.

Ink penetration and distribution affect the final appearance of printing and usage of ink, which are closely concerned by printer and paper maker. The objective of this experiment was to investigate the relationship between drying and back trap mottle. The different drying temperature was carried out to change the coating structure and properties. Fluorescent ink was used to observe and characterize ink distribution by LSCM. The results indicated that drying temperature affected ink distribution evenness. Higher and lower drying temperature could not contribute to ink absorption uniformity. Appropriate drying temperature could contribute to form the best printability of coated paper. Backtrap mottle was tightly linked with ink penetration evenness and uniform ink absorption leaded to little back trap mottle.

In order to solve the problem that the paper will be wrapped and distorted after being laminated by the paper laminating machine, an auto flip delivery mechanism of the paper laminating machine is designed. A set of flip mechanism is installed in the delivery part of the paper laminating machine for placing the small paper stacks right side up or side down, which effectively prevents the laminated paper from being wrapped and distorted. Comparing with manual delivery, it saves labor, reduces the number of employers and also reduces the cost of the enterprises. The effectiveness of the mechanism has been verified in its actual application.