Search

A review on the properties of recycled aggregate concrete filled steel tubes (RACSFT) was presented, followed by the short overview on the related researches. The uniaxial mechanical behavior, flexural performance, creep performance as well as eccentric loaded behavior of RACSFT specimens were discussed. It was found that the differences between the element made of recycled aggregate concrete (RAC) and that of natural aggregate concrete (NAC) could not be ignored. The performance of the RACFST is inferior to that of natural concrete filled steel tube (CFST). But, the RACSFT can be applied into structural elements safely. Based on the test results, it was also concluded that the RACSFT is an effective method to improve the application of RAC.

A LC voltage-control oscillator（LC-VCO） with two stage LC cross coupling structure is designed for serial communication applications. The design constraints and tradeoffs among power dissipation and startup condition, tank amplitude, tuning range are executed using graphical optimization method. This design strategy leads to a good phase noise performance which is demonstrated through design example. This LC-VCO is implemented using 0.18-m RF CMOS process. The post-simulation results show that the circuit has an output frequency from 3.23G to 3GHz, and phase noise is -125.2dBc/1MHz. The VCO only occupies a chip area of 600m*800m, and it consumes 16 mW. A Comparison to prior arts further supports this design example and its optimization technique. The most important thing of this work is that a method of separating variables to analyze design problems is suggested.

In order to mitigate the seismic response of twin-tower structure linked by a steel truss platform bridge, as well as to reduce temperature force in the steel truss, eight groups of combined isolation system, each consisting of one pot-type bearing and four rubber bearings, were designed to connect the upper platform bridge to the lower supporting reinforced concrete towers. The features and working principles of the high-position isolation system were described. Then the seismic responses, including displacement, story drift and floor acceleration, of the structure with the isolation systems were calculated and compared with those of the structure with hinge joints in lieu of isolation. It is found that both the structural seismic responses and the temperature forces in the large-span mega-truss structure can be reduced by the high-position isolation system.

In order to research the optimal parameters of dampers linking adjacent structures for seismic mitigation, two SDOF systems connected with visco-elastic damper (VED) are taken as research object and the primary structural vibration frequency ratio, connection stiffness and linking damping ratio as research parameters. Modified Kanai-Tajimi spectrum is selected to model the earthquake excitation. The peak distribution of power spectral density curves are analyzed, then the formulas of structural mean squared displacement (MSD) and research parameters is derived based on random vibration theory. Then the relationship of the adjacent structural seismic response versus the research parameters was presented. The optimal value of the linking visco-elastic damper damping ratio and stiffness ratio are investigated. Finally, the seismic responses of example structures with or without connecting dampers are contrastively analyzed. The dependence of response mitigation effective on research parameters is highlighted. The results indicate fine earthquake-reduction effectiveness of dampers connecting adjacent structures. It is also shows that optimal parameters of damper cannot reduce the seismic responses of the primary structures connected to the best extent simultaneously. The damper parameters should be determined according to the best seismic mitigation effectiveness of the primary, auxiliary structure or the combined structure system.