Search

The CO2 EOR and Storage Project in Jilin oilfield is the first large CCS demonstration project in China for CO2 geological storage into depleting oil reservoirs. It aims at enhancing the understanding of CO2 EOR mechanisms, movement of CO2 in the reservoir and relevant physical-chemical reactions involved in the storage process, meanwhile gaining practical experience of monitoring and verification of CO2 storage technology in tight oil reservoirs. To have a better understanding of the naturally occurring and phase transformation between CO2 and reservoir fluid and provide accurate data for designing an oil development plan, we must know the interactions between CO2 and reservoir fluids. Hence, in the first part of this paper the CO2 and reservoir fluid phase equilibrium is measured with laboratory experiment, then the collected data is used to calculate the theory and practical CO2 Sequestration capacities.

CO2 flooding process has been a proven valuable tertiary enhanced oil recovery (EOR) technique. In this paper, experiment on extractive capacity of CO2 in oil saturated porous media was conducted under reservoir conditions. The main objectives of the study are to evaluate extractive capacity of CO2 in oil saturated natural cores and improve understanding of the CO2 flooding mechanisms, especially in porous media conditions. Experimental results indicated that oil production decreases while GOR increases with extractive time increases. the changes of the color and state of the production oil shows that oil component changes from light to heavy as extractive time increases. In addition, no oil was produced by water flooding after extractive experiment. Based on the experimental results and phenomena, the main conclusion drawn from this study is that under supercritical condition, CO2 has very powerful extractive capacity. And the application of CO2 flooding is recommended for enhancing oil recovery.

Me/MeN/Me (Me=Al, Ti ) multilayer thin films were deposited on silicon substrates by a multi-arc ion plating method (MAIP) and successive magnetron sputtering method (MS) respectively. The as-prepared and heat-treated films were characterized by scanning electron microscope (SEM) and auger electron spectra (AES). The results revealed that MS method has an advantage over MAIP method to prepare the Al/AlN/Ti submicron thin films which have high density, clear interface and smooth surface. In addition, the present study indicated that both the deposition sequence and mid-layer composition have a significant effect on the thermal stability. After heat-treatment at 500 oC for 10 min, the Al/AlN/Ti multilayer film prepared by the MS method has good thermal stability without surface crack or surface flaking. Furthermore, significant diffusion of oxygen element and nitrogen element within the multilayer interface was observed by the AES measurement. It is believed that the element diffusion in the multilayer interface plays an important role in the binding strength of multilayer interface.