Search

For the purpose of encouraging enterprises to save energy and reduce emissions from the internal demand and providing insight and inspiration to future study,this article not only describes the carbon finance coefficient model based on factors related to carbon finance but also establishes cost estimation model of carbon emissions according to the factors affecting the cost of carbon emissions and carbon finance coefficient.The resulted shows that carbon emissions currency cost namely the monetary costs of carbon emissions is the market value and the currency value of carbon emissions cost based on the financial market conditions.The result of the present work introduces that the cost of carbon emission has a correlation with prevention costs,cost control,carbon content,industrial added value,carbon finance index and so on so that governments and enterprises should take some measures such as perfecting carbon finance system and setting up the cost control of system consciousness to reduce the cost of carbon emissions and protect our environment.

The glass-ceramics were produced via heat treatment from bulk base glass at the appropriate treatment temperatures provided by the differential thermal analysis (DTA) measurement. The effect of nucleation on crystallization kinetics has been explored. It is found that nucleation indeed decreased the activation energy of crystallization. X-ray diffraction (XRD) analysis demonstrated that the main crystalline phase was magnesium alumino-silicate (MgAl2Si3O10), Scanning electron microscopy (SEM) morphology showed that the crystals were needle-like in all the samples.

Glass-ceramic materials of the Li2O-ZnO-SiO2 system, with various amounts of TiO2 added, have been prepared. The appropriate heat treatment temperatures were selected according to the information provided by the differential thermal analysis (DTA). X-ray diffraction (XRD) analysis demonstrated that in the LZS glass-ceramics system, the main phases are Li2ZnSiO4, cristobalite, tridymite and quartz. The scanning electron microscopy (SEM) revealed that crystals appear as lamellar and spherical particles in the glass-ceramics samples. In addition, the average coefficient of the thermal expansion (CTE) values first decreased, then increased and finally tended to flatten. When the content of TiO2 increased to 6%, the CTE value decreased to 9.15×10-6/K, reached the lowest value. When the content of TiO2 increased to 10%, the CTE value reached highest value 13.90×10-6/K.

Li2O-Al2O3-SiO2 glass-ceramics doped with Nd2O3 were prepared by the melting method. The effects of Nd2O3 on the crystallization behavior of Li2O-Al2O3-SiO2 glass-ceramics were studied by DTA, XRD and SEM. With the increase of Nd2O3 content, the glass crystallization temperature arised. The SEM result indicates that the main crystal phase of Li2O-Al2O3-SiO2 glass-ceramics doped with Nd2O3 is β-quartz solid solution, for without doping Nd2O3 it is β-spodumene solid solution. These results shows that the crystallization temperature increases significantly by doping Nd2O3, and phase transition from β-quartz to β-spodumene is suppressed. The grain size increases with the increase of Nd2O3 content.

The mechanism of the increased crystallization stability (the difference between glass incipient crystallization temperature and transition temperature) of Sb2O3 —doped vanadium phosphate sealing glass investigated by X-ray photoelectron spectroscopy (XPS) is reported in the present study. Experimental results showed that after doping with Sb2O3, the rate of bridging oxygen increased while the rate of no-bridging oxygen decreased, and the ratio of V4+/Vtotal also increased, too. This two changes led to the break of V=0 bond which is essential for the formation of V2O5 crystalline phase, thus inhibited the formation of that crystalline phase and improved glass crystallization stability.

The passage aims at solving the problems resulted from the optimized process of Particle Swarm Optimization (PSO), which might reduce the population diversity, cause the algorithm to convergence too early, etc. A whole new mutable simulated annealing particle swarm optimization is proposed based on the combine of the simulated annealing mechanism and mutation. This new algorithm substitutes the Metropolis criterion in the simulated annealing mechanism for mutagenic factors in the process of mutation, which both ensures the diversity of the particle swarm, and ameliorates the quality of the swarm, so that this algorithm would convergence to the global optimum. According to the result of simulated analysis, this hybrid algorithm maintains the simplicity of the particle swarm optimization, improves its capability of global optimization, and finally accelerates the convergence and enhances the precision of this algorithm.

In the gravity anomaly dectection and the inversion of physical property, the parameters can reflect the characters and details of source. At the same time, it can enhance the resolution of the source. In this paper, gravity data from global 1-minute grids are applied to inverse the structure of Longmenshan fault zone, other small faluts, several active faults and geological stratum, the research area where is complex geologic region. The main goal of this paper is an attempt to interpret the gravity anomalies of faults in the Longmenshan Fault zones.

Frost action leads to water movement toward frozen parts in soil matrix, and thus causes freeze heave and thaw weakening issues in many engineering works. This study was conducted as an attempt to investigate the analytical solutions to the water movement and distribution taken place in soil which was subjected to frost action. A geometry model was established by dividing the soil matrix into two individual parts in terms of the freezing progress each part takes. Model analytical solutions were sought with regard to the water movement over time that frost action takes. The analytical solutions were compared with the test results in a preceding investigation. It is indicated that the analytical solutions derived from the model is in good agreement with the test results and is reliable to predict the water movement in soil driven by frost action.

Porous suspended ceramsite (PSC) supported nanoscale zero valent iron (NZVI/PSC) were applied to the reductive removal of nitrate to investigate the effects. XRD, SEM and EDS analyses on NZVI/PSC revealed that PSC had loaded some nanoparticles, whose size was about 50 nm. Nitrate reduction rate of NZVI/PSC reached about 80% in 60 min, while the PSC unsupported nanozerovalent iron performed poorly with only 8% removal of the nitrate. Furthmore, during the reactions of NZVI/PSC and PSC with nitrate, for the NZVI/PSC, pH change was the greatest, while the reaction with PSC (this particles shows the lowest reactivity for nitrate reduction) resulted in the least pH change.

In this paper, productive technology and application of reflective thermal insulating coatings at home and abroad in the field of architecture has been introduced. Its testing device has been designed, and the related factors which influenced its thermal properties has been analyzed. The silt sintered brick combined with reflective thermal insulating coatings. Its feasibility has been analyzed whether it could make indoor reach a certain temperature condition.

This paper represents a fast approach for reduction of torque ripple on brushless DC (BLDC) motor. From a classic motor model, a mathematics component of torque ripple is extracted. To reduce the ripple component, a small modification of PWM and an open-loop control algorithm are made in the inverter of BLDC motor. At last, our paper describes and analyzes the simulation results of this approach by using PSIM. Without any sensors or advanced controllers, this approach can work in most BLDC motor drivers just after software update.

The working fluid flow and the machining debris movement in the machining gap exercise a great influence on the process performance in end electrical discharge milling and mechanical grinding compound machining. In this paper, the working fluid flow and the machining debris movement in the machining gap are modeled based on the liquid-solid two-phase flow theory. The gap flow field is calculated with the software of Fluent, and the velocity field and the pressure field are analyzed. The results show that in the gap flow field of the compound machining, the working fluid flow can be accelerated, and the machining debris can be ejected timely by the rapid rotation of the tool electrode, so the compound process performance can be enhanced.

This paper presents a high-precision position control system for a linear switched reluctance motor (LSRM) based on dSPACE real-time control platform. The LSRM has a very simple structure and it can be manufactured easily, and there is no need for magnets. The system utilizes dSPACE platform as the controller and generates the real-time code for the control algorithm, tuning the control parameters on line and PD algorithm is implemented. The results show that control algorithm can substantially reduce position error. The DSP-based position control scheme is implemented and experimental results prove the effectiveness of control design method.

Vibration is a common phenomenon in cutting process, which is harmful for machining quality and machine tools. This paper focused on the occurrence and characteristics of vibration of the cutting tool and workpiece by changing cutting speed in milling of stainless steels 304. Vibration acceleration signals of both the cutting tool and the workpiece were sampled and analyzed in time domain and frequency domain. Vibration noise and vibration mark were used to judge the occurrence of violent vibration. In the experiments, both self-excited vibration and violent forced vibration were found at different value of cutting speed. Violent forced vibration was easy to be induced owing to interrupted continuous impulsion cutting.The Maximum amplitude of vibration acceleration signals varied with the cutting speed changing. With the cutting speed increased, the probability of violent vibration increased. Bigger amplitude of vibration will not always lead to vibration mark on surface of workpiece, obvious vibration mark only occurred when n=600 r/min and 700 r/min. In order to reduce the impact of violent vibration on machining quality, more attention should also be paid to the static and dynamics characteristics of the cutting tools and workpiece in milling of stainless steels.

A high-order Iterative Learning Control (ILC) strategy is designed for Permanent Magnet Linear Motor (PMLSM). This iterative learning controller is designed to high-order open and closed loop PID-type. This paper gives the convergence conditions of the proposed controller and proves that the tracking bound is determined by the bounds of state uncertainty and output disturbance to the system. The proposed ILC strategy result shows that position precision of PMLSM in point-to-point motion can be effectively improved with this scheme. The experiments demonstrate that the presented ILC strategy is effective and robust.

The effects of low-temperature frit Li2O-Na2O-K2O-B2O3-SiO2-CaO-BaO-ZnO (abbreviated as BS) on the sintering behavior and electrical properties of 0.95K0.49Na0.51NbO3- 0.05LiSbO3 (abbreviated as KNN-LS) lead-free piezoceramics were investigated. The sintering temperature of the KNN-LS ceramics can be reduced from 1080 °C to 1000 °C due to the addition of BS frit. For the 0.5 wt% BS-doped KNN-LS ceramics, which are sintered at reduced temperature of 1000 °C for 2 h, remain relatively high piezoelectric constant d33 (195 pC/N) and planar electromechanical coupling coefficient kp (40.7%). In addition to other optimization effects, such as reduction of dielectric loss from 3.6% to 2.7% and increment of mechanical quality factor Qm from 48 to 70, this BS frit was experimentally proved to be good for low temperature sintering of KNN-based ceramics while maintaining high piezoelectric response.

The core category of cultural industry determination is an important research topic for decision-making in the cultural industry development. However, because of the insufficiency of statistics data and the difference in measurement, objective analysis on category correlation of cultural industry is difficult. This paper presents a cultural industry category correlation model with the empirical analysis using ISM (Interpretative Structural Modeling Method). Based on experts’ judgment and knowledge, this approach can generate the reachability matrix and construct the directed digraph to analyze the correlation degree of different culture industry categories. Through this analysis model, some convincing recommendations are also provided in the end.

First, (K,Na)NbO3 (abbreviated as KNN) powders were synthesized by microwave hydrothermal method using Nb2O5, NaOH and KOH as raw materials. The effects of NaOH/KOH mole ratio and reaction temperature on the structure of KNN powders were studied systematically. Near spherical KNN powders of about 800 nm in diameter can be obtained at the optimized processing parameters as follows: NaOH/KOH mole ratio was 1.40/4.60, reaction temperature was 200 °C. Second, the ceramics were successfully prepared from the microwave hydrothermal synthesized KNN powders under 1090 °C for 2 h. This ceramic sample showed the enhanced piezoelectric properties such as piezoelectric constant d33=142 pC/N and planar electromechanical coupling coefficient kp=38%, in addition to other good properties as relative dielectric constant εr=426, Curie temperature Tc=410 °C, remnant polarization Pr=17.45μC/cm2 and coercive field Ec=1.41 kV/mm, indicating that microwave hydrothermal method can improve the properties of KNN ceramics high efficiently.

The B2O3-CuO oxide mixture (abbreviated as BC) was selected to lower the sintering temperature of (Ca0.9375Sr0.0625)0.25(Li0.5Sm0.5)0.75TiO3 (abbreviated as CSLST) microwave dielectric ceramics by solid sate reaction technique. The effects of BC doping amounts on the crystal structure, microstructure and microwave dielectric properties of the ceramics were investigated. For the ceramic sample with the composition of CSLST + 5 wt% BC, its sintering temperature was reduced to 1000 °C as compared to 1200 °C for pure CSLST. In addition to the obtained good microwave dielectric properties as follows: εr = 80.4, Q×f = 1380 GHz, τf = -32.89 ×10-6/°C, this ceramic was a desirable high-permittivity microwave dielectric candidate for low-temperature cofired ceramic (LTCC) applications.

By introducing Ti vacancies for valence compensation, Nd-doped SrTiO3 ceramics yielding the formula NdxSr1-xTi1-x/4O3 (0≤x≤0.200) were successfully prepared by solid state reaction route in air. All the ceramics had single perovskite structure indexed by XRD profiles, while the symmetry changed from cubic to tetragonal with increasing x value. The grain size markedly decreased from ~30 μm for un-doped SrTiO3 ceramics to ~1 μm for NdxSr1-xTi1-x/4O3 ceramics with x=0.024, which was observed by scanning electron microscopy (SEM). The dielectric properties were measured at 1 kHz in ambient temperature. The dielectric constant was found to be leading to a maximum value of 5410 for as-sintered sample with x=0.104. The breakdown strength of all NdxSr1-xTi1-x/4O3 samples was examined to be higher than 10 kV/mm. These results indicated that Nd-doped SrTiO3 ceramics could be used to fabricate high voltage capacitors with enhanced energy storage density.

For a medium or large-sized gear drive, in order to achieve the optimum weight reduction effect, an approach of weight reduction design is proposed that multi-objective optimization of gear parameters is carried out firstly, and then structural optimization is adopted to design the gear former. The rational design parameters of a gear drive are determined by the multi-objective optimization with minimizing the sum of gear volumes and the equivalent moment of inertia of input shaft (EMI) synchronously. Conceptual design of the former is given by structural topology optimization of the gear, and the reasonability of topology optimization can be demonstrated by static and dynamic analysis. The results indicate that for a double-reduction gearbox of 500KW co-rotating twin screw pulping extruder, the EMI of the gear drive reduces by 20.88% through the multi-objective optimization of gear parameters, and the moment of inertia of a bull gear reduces by 38.86% through structural topology optimization.

In order to enhance design reliability of a co-rotating twin screw pulping extruder (TSPE), optimum design on screw parameters of the TSPE was studied based on the extrusion model. The maximum shear flux or the minimum power consumption, or the two synchronous optimizations were taken as objective functions, and constraint conditions, such as thread lead, depth of thread, screw rotational speed, number of reverse thread lead, actual top width of the flight, torsional strength and stiffness of the screw mandrel, and so on were confirmed base on actual requirements of the TSPE manufacture and application. The optimizing results show that two-objective optimum design results split the difference of the two single-objective optimum design, and it is the most economical in reducing manufacture cost of the equipment and pulping expenses.

In order to calculate important design parameters, screw axial force and power consumption of twin screw pulping extruder (TSPE), considering actions of the solid material plug in reverse thread of the TSPE and according to static balance principle, an extrusion model including plug flowing and shearing in reverse thread is proposed in the paper. Based on the model, screw axial force, screw torque, power consumption and flow rate can be derived. When changing thread lead numbers or slot width on the flight of the reverse thread, theoretical calculating results and testing results are better consistent.

In order to design trapezoidal thread parameters of co-rotating twin screw extruder that is used in non-fused materials processing, based on geometry of fully wiped co-rotating twin screw extruder by M. L. Booy, the paper adopts tangential approximation method to determine the parameters of trapezoidal thread choosing tangent of especial point of normal section curve. And reasonable spans of oblique angle, actual top width of flight, channel depth and thread lead are determined by the optimum design with objective function of maximal theoretical flux. Experiments show that a co-rotating twin screw pulping extruder of trapezoidal thread designed by the method is easier to machine and measure, and pulp processed by the twin screw pulping extruder can meet the quality requirements. Thus, twin screw designed by the method reserves the main strongpoint of the fully wiped co-rotating twin screw extruder.