Search

Abstract Methylammonium chloride (MACl) additive is almost irreplaceable in high‐performance formamidine perovskite photovoltaics. Nevertheless, Some of the problems that can arise from adding MACl are rarely mentioned. Herein, it is proposed for the first time that the addition of MACl would cause the non‐stoichiometric ratio in the perovskite film, resulting in the halogen vacancy. It is demonstrated that the non‐synchronous volatilization of methylamine cations and chloride ions leads to the formation of halogen vacancy defects. To solve this problem, the NH4HCOO is introduced into the perovskite precursor solution to passivate the halogen vacancy. The HCOO− ions have a strong force with lead ions and can fill the halogen vacancy defects. Consequently, the champion devices' power conversion efficiency (PCE) can be improved from 21.23% to 23.72% with negligible hysteresis. And the unencapsulated device can still retain >90% of the initial PCE even operating in N2 atmosphere for over 1200 h. This work illustrates another halogen defect source in the MACl‐assisted formamidine perovskite photovoltaics and provides a new route to obtain high‐performance perovskite solar cells.

Abstract Carbon nanodots (CDs) have emerged as an alternative option for traditional nanocrystals due to their excellent optical properties and low toxicity. Nevertheless, high emission efficiency is a long‐lasting pursuit for CDs. Herein, CDs with near‐unity emission efficiency are prepared via atomic condensation of doped pyrrolic nitrogen, which can highly localize the excited states thus lead to the formation of bound excitons and the symmetry break of the π–electron conjugation. The short radiative lifetimes (

Abstract Flexible perovskite solar cells (FPSCs) represent a promising technology in the development of next‐generation photovoltaic and optoelectronic devices. SnO2 electron transport layers (ETL) typically undergo significant cracking during the bending process of FPSCs, which can significantly compromise their charge transport properties. Herein, the semi‐planar non‐fullerene acceptor molecule Y6 (BT‐core‐based fused‐unit dithienothiophen [3,2‐b]‐pyrrolobenzothiadiazole derivative) is introduced as the buffer layer for SnO2‐based FPSCs. It is found that the Y6 buffer layer can enhance the ability of charge extraction and bending stability for SnO2 ETL. Moreover, the internal stress of perovskite films is also reduced. As a result, SnO2/Y6‐based FPSCs achieved a power conversion efficiency (PCE) of 20.09% and retained over 80% of their initial efficiency after 1000 bending cycles at a curvature radius of 8 mm, while SnO2‐based devices only retain 60% of their initial PCE (18.60%) upon the same bending cycles. In addition, the interfacial charge extraction is also effectively improved in conjunction with reduced defect density upon incorporation of Y6 on the SnO2 ETL, as revealed by femtosecond transient absorption (Fs‐TA) measurements.