Search

The aim of the present work is to develop novel hybrid composites using areca, kenaf, and snake grass fibers as reinforcement and epoxy as the matrix. The areca, kenaf, and snake grass fibers were extracted from Catechu Linnaeus, Hibiscus cannabinus, and Sansevieria Ehrenbergii plants, respectively, and treated with 5% NaOH to improve the interfacial adhesion between the hydrophilic fiber and the hydrophobic matrix. Hybrid composites were developed by the compression molding technique and formulated based on the weight fraction of fibers. Tensile, flexural, and impact strength and hardness samples were prepared as per ASTM D 3039, ASTM D 790, ASTM D 256, and ASTM D 2240, respectively. The effects of alkaline treatment on developed hybrid composites were investigated. The developed hybrid composites with 20% wt. snake grass and 10% wt. areca fiber present interesting mechanical properties with a tensile strength of 58 MPa, flexural strength of 124 MPa, impact strength of 5.24 kJ/m2, and hardness of 88. The results indicate that maximum mechanical properties were obtained for alkaline-treated fiber composites with 20% wt. snake grass fiber compared to untreated fiber composites owing to better adhesion between the treated fiber and the matrix. The effect of alkaline treatment was analyzed by Fourier transform infrared. The fractured surfaces of tested samples were analyzed by scanning electron microscopy. [ABSTRACT FROM AUTHOR]

Increased environmental concerns and global warming have diverted effort all over the world to focus on renewable and sustainable resources for the next generation of composite products due to their recyclability, renewability, cost effectiveness, and satisfactory mechanical performance. Bio/natural fibers which are environment friendly materials employed as reinforcement have led to developing a biocomposite for reduction in greenhouse emission and carbon footprints. However, biofibers are also having some limitations that need to be addressed including poor compatibility between the reinforcing fiber matrices, high moisture absorption, swelling, poor chemical and fire resistance, and high dispersion of mechanical properties. A lot of research has been performed on physical and mechanical properties of natural fiber composite. Properties of such novel composite mainly depend on adhesion between fiber and matrices. Consequently, poor adhesion, high moisture absorption, and swelling lead to formation of crack in both the matrix and fiber. Therefore, numerous techniques have been tried till date to modify both fiber surfaces to enhance their adhesion and reduce their water absorption. This review article provides comprehensive information about effect of various surface modification techniques that include alkaline, silane, acetylation, permanganate, peroxide, benzoylation, acrylonitrile grafting, maleic anhydride grafted, acrylation, and isocyanate. In addition, the effects of cellulose, hemicellulose, lignin, and pectin of biofibers are also reported. This review concluded that chemical treatment of biofibers with 5% NaOH concentration improves the physical, mechanical, and thermal properties of the resulting composites compared to untreated fiber composites. [ABSTRACT FROM AUTHOR]

The aim of the present work is to develop novel hybrid composites using areca, kenaf, and snake grass fibers as reinforcement and epoxy as the matrix. The areca, kenaf, and snake grass fibers were extracted from Catechu Linnaeus, Hibiscus cannabinus, and Sansevieria Ehrenbergii plants, respectively, and treated with 5% NaOH to improve the interfacial adhesion between the hydrophilic fiber and the hydrophobic matrix. Hybrid composites were developed by the compression molding technique and formulated based on the weight fraction of fibers. Tensile, flexural, and impact strength and hardness samples were prepared as per ASTM D 3039, ASTM D 790, ASTM D 256, and ASTM D 2240, respectively. The effects of alkaline treatment on developed hybrid composites were investigated. The developed hybrid composites with 20% wt. snake grass and 10% wt. areca fiber present interesting mechanical properties with a tensile strength of 58 MPa, flexural strength of 124 MPa, impact strength of 5.24 kJ/m2, and hardness of 88. The results indicate that maximum mechanical properties were obtained for alkaline-treated fiber composites with 20% wt. snake grass fiber compared to untreated fiber composites owing to better adhesion between the treated fiber and the matrix. The effect of alkaline treatment was analyzed by Fourier transform infrared. The fractured surfaces of tested samples were analyzed by scanning electron microscopy. [ABSTRACT FROM AUTHOR]

The drilling process is the most essential in the final assembly of the mechanical parts. Natural fiber based composites replace traditional materials due to their advantages, such as strength to weight ratio, availability, and environmental hazards. In this work, an attempt has been made to find the minimum thrust force produced by the drill tool at specified drilling process parameters. The drilling process parameters used for the investigation are rotational speed, tool feed, and resins. The spindle speed and feed rate are selected with three levels. Three resin materials were used, namely, epoxy, polyester, and vinyl ester. Taguchi's L27 orthogonal array was implemented. The result shows that the candlestick drill bit generated lesser thrust force at the specified drilling process parameters, followed by the twist and step cone drill bits. [ABSTRACT FROM AUTHOR]