Search

• On-orbit non-intrusive perturbation measurement of Hall effect thrusters. • 10 kHz to 100 kHz analysis better than full frequency domain. • Perturbation signal amplified by scatter numbers in the far-zero region. • The physical core represented by the scatter numbers is the dwell time. • Dwell time is mainly related to breathing oscillations. The failure of Hall effect thruster (HET) is usually the result of the accumulation of several tiny abnormal disturbances during operation. Timely and accurate early warning of perturbations is an important guarantee for the normal operation of thrusters. In this study, when the perturbation rate of HET signal (anode voltage or anode flow rate) is −4% to 4%, the time scale signal of breathing oscillation (BO) in the frequency range of 10 kHz to 100 kHz is statistically analyzed. Experiments show that when the signal is perturbed, the balance between ionization and acceleration of plasma in the discharge channel is destroyed, resulting in the dwell time of the wave peaks and valleys of BO in the far-zero region with the perturbation law, which visually shows that the number of scattered points at the corresponding current value changes regularly. According to the above statistical characteristics, this paper proposes a new condition monitoring index, namely the number of scattered points in the wave peaks side of the far-zero point area, and designs a perturbation indicator for the operating condition of the HET. Compared with direct monitoring of discharge current in engineering, this indicator can amplify the influence of the perturbation signal on BO, and has better identification and accuracy. Meanwhile, the indicator does not use invasive measurement and complex equipment, and is promising to be applied to the monitoring and diagnosis of the perturbation operation state of the on-orbit thruster. [ABSTRACT FROM AUTHOR]

With the development of electric space propulsion and all-electric propulsion technologies, the application range of the Hall effect thruster (HET) has gradually expanded. As an important part of the HET, the magnetic field plays a decisive role in its performance. In the development of versatile HETs, it is necessary to comprehensively and thoroughly understand the effects of the magnetic field on the HET discharge characteristics. In this paper, a HEP-100X thruster with multiple degrees of freedom in terms of magnetic field control is used to study the effects of the peak magnetic field position on the thruster discharge characteristics. The results indicate that the peak magnetic field position can effectively control the main ionization zone position and affect the ionization rate. The thruster has the best comprehensive discharge performance when the peak magnetic field position is located near the channel exit. Further analysis reveals that the performance improvement is mainly due to the reduced ion loss on the wall surface and plume divergence half-angle, and the increased current utilization efficiency and voltage utilization efficiency. The HEP-100X shows the above trends under various flow conditions, and the anode efficiency is the highest when the anode flow is 50 sccm. In this condition, the propellant is sufficiently ionized and the ion loss on the wall surface is small. This research provides the necessary support for a comprehensive understanding of the role and significance of the magnetic field in the thruster discharge process, and has important significance for the design optimization of multifunctional Hall thrusters and subsequent research. [ABSTRACT FROM AUTHOR]