Search

To confirm the presence of water on the moon, many scientists of the world are making continuous efforts through remote sensing data of different missions. In this direction, the Dual Frequency Synthetic Aperture Radar (DFSAR) sensor of the Chandrayaan-2 mission adds a very important chapter which is the world's first Planetary SAR mission of fully polarimetric capability with L- and S-band. This study utilizes the L-band fully polarimetric DFSAR data of Chandrayaan-2 mission for the PolSAR parameters-based analysis and ice detection in permanently shadowed regions (PSRs) of the lunar South Polar craters. The PSR IDs SP_875930_3125710, SP_837670_3387710, and SP_874930_3578760 of the lunar South Pole were selected for the polarimetric analysis using DFSAR L-band. Based on previous studies ((Li et al., 2018), two out of three PSR Ids (SP_875930_3125710 and SP_874930_3578760) were easy to identify for surface ice. That is why only two PSR IDs were used for polarimetric SAR analysis of DFSAR data for surface ice characterization and detection. The hybrid polarimetric simulation was also performed to the fully polarimetric L-band data to study stokes vectors and associated child parameters for the selected study area. The analysis of polarimetric distortions confirms the persistence of the polarimetric quality of the SAR data and for this, the polarimetric distortion analysis was performed with co-pol and cross-pol channels. Wave dichotomy-based Huynen decomposition and Barnes decomposition models were implemented to the fully polarimetric quad-pol DFSAR data. The eigenvalue-eigenvector-based decomposition model was also implemented to characterize the scattering behavior of the PSRs. A high correlation was obtained between Circular Polarization Ratio (CPR), entropy, and alpha for the 200 hundred points randomly collected from the image. Diversity index also showed a high positive correlation with CPR. The polarimetric quality of the data was evaluated with the scatterplot between the cross-polarimetric channels and it was observed that the L-band quad-pol data of DFSAR satisfies the criteria for PolSAR data of a monostatic SAR system. Analysis of the results obtained from the polarimetric SAR data indicated that the high volumetric scattering and CPR for the PSR ID SP_875930_3125710 may be due to ice clusters within the permanently shadowed region. Polarimetric analysis of the PSR (SP_874930_3578760) at Howarth Crater using L-band DFSAR data shows a low amount of volumetric scattering and a low CPR for most locations in the PSR. The different ranges of CPR and volume scattering for both craters indicate that polarimetric parameters and indices should be studied in conjunction with geomorphological parameters of the lunar surface, for unambiguous identification of surface ice clusters in the PSR. [ABSTRACT FROM AUTHOR]

The Polarimetric Synthetic Aperture Radar (PolSAR) systems use electromagnetic radiations of different polarizations in the microwave frequency to collect the scattering information from targets on the Earth. Nevertheless, as with any other electronic device, the PolSAR systems are also not ideal and subjected to distortions. The most important of these distortions are the polarimetric distortions caused due to the channel imbalance, phase bias, and crosstalk between the different polarization channels. For the spaceborne PolSAR systems, the Earth's ionosphere also contributes to an additional polarimetric distortion known as the Faraday rotation. An effort was made in this study to perform the polarimetric calibration of the Quad-pol and Compact-pol PolSAR datasets acquired using different airborne and spaceborne PolSAR systems to estimate and minimize these polarimetric distortions. The investigation was also done to analyze the impact of these polarimetric distortions on the scattering mechanisms from ground targets and on its dependency on the radar wavelength. The study was done using the UAVSAR L-band Quad-pol dataset, RADARSAT-2 Quad-pol dataset, ALOS-2 PALSAR-2, ISRO's L&S- Band Airborne SAR (LS-ASAR) Quad-pol and Compact-pol datasets, and the RISAT-1 Compact-pol dataset. Calibration of the airborne PolSAR data was carried to understand the level of polarimetric distortions in the LS-ASAR product that is a precursor mission to the spaceborne Dual-Frequency L&S Band NASA-ISRO Synthetic Aperture Radar (NISAR) mission. It is understood that the crosstalk is the dominant polarimetric distortion, which severely affects the PolSAR datasets compared to the other polarimetric distortions, and it is more for the higher wavelength PolSAR systems. The Quegan, Improved Quegan, and Ainsworth algorithms for crosstalk estimation and minimization was performed for the different Quad-pol datasets and it was found that the Improved Quegan algorithm is suitable for removing crosstalk from datasets having high crosstalk and the Ainsworth algorithm is suitable for removing crosstalk from datasets having low crosstalk. The Freeman method of the polarimetric calibration was implemented for the compact-pol datasets and it was able to considerably minimize the polarimetric distortions. The coherency matrix, scattering matrix, model-based decomposition, polarimetric signatures, and roll invariant parameter-based analysis revealed that all the datasets after polarimetric calibration were showing the correct scattering responses expected from the ground targets. [ABSTRACT FROM AUTHOR]

The regulation of the carbon cycle is a critical ecosystem service provided by forests globally. It is, therefore, necessary to have robust techniques for speedy assessment of forest biophysical parameters at the landscape level. It is arduous and time taking to monitor the status of vast forest landscapes using traditional field methods. Remote sensing and GIS techniques are efficient tools that can monitor the health of forests regularly. Biomass estimation is a key parameter in the assessment of forest health. Polarimetric SAR (PolSAR) remote sensing has already shown its potential for forest biophysical parameter retrieval. The current research work focuses on the retrieval of forest biophysical parameters of tropical deciduous forest, using fully polarimetric spaceborne C-band data with Polarimetric SAR Interferometry (PolInSAR) techniques. PolSAR based Interferometric Water Cloud Model (IWCM) has been used to estimate aboveground biomass (AGB). Input parameters to the IWCM have been extracted from the decomposition modeling of SAR data as well as PolInSAR coherence estimation. The technique of forest tree height retrieval utilized PolInSAR coherence based modeling approach. Two techniques – Coherence Amplitude Inversion (CAI) and Three Stage Inversion (TSI) – for forest height estimation are discussed, compared and validated. These techniques allow estimation of forest stand height and true ground topography. The accuracy of the forest height estimated is assessed using ground-based measurements. PolInSAR based forest height models showed enervation in the identification of forest vegetation and as a result height values were obtained in river channels and plain areas. Overestimation in forest height was also noticed at several patches of the forest. To overcome this problem, coherence and backscatter based threshold technique is introduced for forest area identification and accurate height estimation in non-forested regions. IWCM based modeling for forest AGB retrieval showed R 2 value of 0.5, RMSE of 62.73 (t ha −1 ) and a percent accuracy of 51%. TSI based PolInSAR inversion modeling showed the most accurate result for forest height estimation. The correlation between the field measured forest height and the estimated tree height using TSI technique is 62% with an average accuracy of 91.56% and RMSE of 2.28 m. The study suggested that PolInSAR coherence based modeling approach has significant potential for retrieval of forest biophysical parameters. [ABSTRACT FROM AUTHOR]

Studies of the lunar surface from Synthetic Aperture Radar (SAR) data have played a prominent role in the exploration of the lunar surface in recent times. This study uses data from SAR sensors from three Moon missions: Chandrayaan-1 Mini-SAR, Lunar Reconnaissance Orbiter (LRO) Mini-RF and Chandrayaan-2 Dual Frequency Synthetic Aperture Radar (DFSAR). DFSAR sensor is the first of its kind to operate at L-band and S-band in fully and hybrid polarimetric modes. Due to the availability of only L-band data out of the two bands (L-and S-band) for the study site, this study only used DFSAR's L-band data. The dielectric characterization and polarimetric analysis of the lunar north polar crater Hermite-A was performed in this study using Chandrayaan-1 Mini-SAR, LRO Mini-RF and Chandrayaan-2 DFSAR data. Hermite-A lies in the Permanently Shadowed Region (PSR) of the lunar north pole and whose PSR ID is NP_879520_3076780. Because of its location within the PSR of the lunar north pole, the Hermite-A makes an ideal candidate for a probable location of water-ice deposits. This work utilizes S-band hybrid polarimetric data of Mini-SAR and Mini-RF and L-band fully polarimetric data of DFSAR for the lunar north polar crater Hermite-A. This study characterizes the scattering mechanisms from three decomposition techniques of Hybrid Polarimetry namely m-delta, m-chi, and m-alpha decompositions, and for fully polarimetric data Barnes decomposition technique was applied which is based on wave dichotomy. Eigenvector and Eigenvalue-based decomposition model (H-A-Alpha decomposition) was also applied to characterize the scattering behavior of the crater. This study utilizes the hybrid-pol and fully polarimetric data-based Integral Equation Model (IEM) to retrieve the values of dielectric constant for Hermite-A crater. The dielectric constant values for the Hermite-A crater from Chandrayaan-1 Mini-SAR and LRO Mini-RF are similar, which goes further in establishing the presence of water-ice in the region. The values of the dielectric constant for Chandrayaan-2 in some regions of the crater especially on the left side of the crater is also around 3 but overall the range is relatively higher than the compact/hybrid polarimetric data. The dielectric characterization and polarimetric analysis of the Hermite-A indicatively illustrate that the crater may have surface ice clusters in its walls and on some areas of the crater floor, which can be explored in the future from the synergistic use of remote sensing data and in-situ experiments to confirm the presence of the surface ice clusters. [ABSTRACT FROM AUTHOR]

This study compares the utility of multifrequency SAR and Optical multispectral data for land-cover classification of Mumbai city and its nearby regions with a special focus on water body mapping. The L-band ALOS-2 PALSAR-2, X-band TerraSAR-X, C-band RISAT-1, and Sentinel-2 datasets have been used in this work. This work is done as a retrospective study for the dual-frequency L and S-band NASA-ISRO Synthetic Aperture Radar (NISAR) mission. The ALOS-2 PALSAR-2 data has been pre-processed before the implementation of machine learning algorithms for image segmentation. Multi-looking is performed on ALOS-2 PALSAR-2 data to generate square pixels of size 5.78 m and then target decomposition is applied to generate a false-color composite RGB image. While in the case of TerraSAR-X and RISAT-1 datasets, no multi-looking was performed and direct target decomposition was applied to generate false-color composite RGB images. Similarly, for the optical dataset that has a resolution of 10 m, a true color composite, and a false color composite RGB image are generated. For the comparative study between ALOS-2 PALSAR-2 and Sentinel-2 dataset, the RGB images are divided into smaller chunks of size 500*500 pixels each to create a training and testing dataset. Ten image patches were taken from the large dataset, out of which eight patches were used to train the machine learning models Random Forest (RF), K Nearest Neighbor (KNN), and Support Vector Machine (SVM), and two patches were kept for testing and validation purpose. For training the machine learning models, feature vectors are generated using the Gabor filter, Scharr filter, Gaussian filter, and Median filter. For patch 1, the mIOU for true-color composite based Optical image varies from 0.2323 to 0.2866 with the RF classifier performing the best and the mIOU for false-color composite based Optical image varies from 0.4130 to 0.4941 with the RF classifier performing the best while for ALOS-2 PALSAR-2 data, the mIOU varies from 0.4033 to 0.4663 with the RF classifier outperforming the KNN and the SVM classifiers. For patch 2, the mIOU for true-color composite based Optical data varies from 0.3451 to 0.4517 with KNN performing the best and the mIOU for false-color composite based Optical image varies from 0.5156 to 0.5832 with the RF classifier performing the best while for ALOS-2 PALSAR-2 data, the mIOU varies from 0.4600 to 0.5178 with the RF classifier outperforming the KNN and the SVM classifiers. The gap between the performance of ALOS-2 PALSAR-2 data and Sentinel-2 optical data is observed when the IOU of water class is compared, with IOU w for the true-color composite based optical image at a maximum of 0.2525 and for false-color composite based optical image at a maximum of 0.7366 while for ALOS-2 PALSAR-2 data a maximum IOU w of 0.7948 is achieved. The better performance of SAR data as compared to true-color composite based optical image data is due to the misclassification of ground and water classes into urban and forest in the case of the true-color composite based optical dataset which can be attributed to the high similarity between water and forest classes in the case of true-color composite based optical data whereas both these classes are easily separable in case of SAR data. This issue is however resolved by using the false color composite based optical image dataset for the classification task which performs slightly better than ALOS-2 PALSAR-2 data in the overall classification task. However, the SAR data works best in water body detection as notable from the high IOU for water class in the case of SAR data. In addition to the comparative analysis between Sentinel-2 optical and ALOS-2 PALSAR-2 data, land-cover classification has been performed on X-band TerraSAR-X and C-band RISAT-1 data on a single patch and it has been found that the RF classifier performs the best, recording the mIOU 0.5815 for X-band TerraSAR-X data, mIOU of 0.4031 for the C-band RISAT-1 data, and mIOU of 0.6153 for the L-band ALOS-2 data. [ABSTRACT FROM AUTHOR]