Search

The arid area of Northwest China belongs to the rain-fed agricultural area of the Loess Plateau, and water resources have become one of the important factors limiting agricultural development in this area. This study employed the AquaCrop model to predict the yield advantages and environmental adaptability of maize in Dingxi City from 2016 to 2020 under two cultivation practices: ridge tillage (100% film coverage with double ridge-furrow planting) and flat planting (81.8% film coverage with wide-film planting). The numerical simulation of the tillage and fertilization process of the double-ridge seedbed was carried out by EDEM, and the key components were tested by the Box–Behnken center combination test design principle to obtain the optimal parameter combination. The results showed that ridge planting was more suitable for agricultural planting in rain-fed arid areas in Northwest China. The simulation analysis of ridging and fertilization showed that the forward speed of the combined machine was 0.50 m/s, the rotation speed of the trough wheel of the fertilizer discharger was 39 rmp, and the rotary tillage depth was 150 mm. The qualified rate of seedbed tillage was 93.6%, and the qualified rate of fertilization was 92.1%. The research shows that the whole-film double ridge-furrow sowing technology of maize is more suitable for the rain-fed agricultural area in the arid area of Northwest China. The simulation results of the ridging fertilization device are consistent with the field experiment results. The research results provide a certain technical reference for the optimization of the whole-film double ridge-furrow sowing technology.

Weeds compete with rice for sunlight and nutrients and are prone to harboring pathogens, leading to reduced rice yields. Addressing the issues of low weeding efficiency and weed mortality rates in existing inter-row weeding devices, the study proposes the design of a combination paddy field inter-row weeding wheel. The device’s operation process is theoretically analyzed based on the weed control requirements in the northeastern region of China, leading to the determination of specific structural parameters. This research conducted experiments on the mechanical properties of weed cutting to obtain geometric parameters for paddy field weeds. It was found that the range for the cutting gap of the dynamic–fixed blade is between 0.6 mm to 1.4 mm and the cutting angle is between 5° to 15°, resulting in the lowest peak cutting force for weeds. Using LS-DYNA R12.0.0 dynamic simulation software, a fluid–structure interaction (FSI) model of the weeding wheel–water–soil system was established. By employing the central composite experimental design principle and considering the soil stir rate and coupling stress as indicators, the optimal structural parameter combination for the device is obtained: a dynamic–fixed blade cutting gap of 1.4 mm, a cutting angle of 10.95°, and a dynamic blade install angle of −3.44°. Field experiments demonstrated that the device achieved an average weeding rate of 89.7% and an average seedling damage rate of 1.9%, indicating excellent performance. This study contributes to improving weed mortality rates and provides valuable guidance for inter-row mechanical weeding technology.

Preharvest threshing is a harvesting method that focuses on collecting rice grains while leaving the rice straw unharvested. Investigating the interaction mechanism between the machine and rice during the operation process and its correlation with harvest losses is crucial for enhancing harvest quality. In this study, structural design and operational mechanism analysis of the combs was conducted through theoretical analysis. By extracting the relevant parameters of rice plants, a model of entire-plant rice during the harvesting period was established based on the discrete element method (DEM). Numerical simulation studies were conducted to clarify the interaction mechanism between the machinery and rice at different operating stages and under various operating parameters, as well as the impact of this interaction on operational quality. The simulation results revealed that various operating parameters had a significant impact on the sliding-cut effect between the combs and rice. A higher cylinder rotation speed enhanced the effect, whereas increased forward velocity hampered it. Additionally, the effect initially improved and then decreased with a higher threshing height. In the bench test, high-speed cameras were used to verify and further analyze the comb–rice interaction mechanism and explore the optimal working parameter combination. The results showed that at a rotation speed of 616 r/min, a forward velocity of 0.91 m/s, and a threshing height of 792 mm, the grain loss rate was 1.997%, and the impurity rate was 4.073%. The harvesting losses were effectively reduced, validating the effectiveness of the study on the interaction between the machinery and rice.

In order to solve the problems of poor hole-filling performance and the high seed-breakage rate of conventional rice bud seed precision hole direct seed-metering devices, a side-filled rice precision hole direct seed-metering device was developed, and the mechanism and force analyses for seeding operations were carried out. The key factors affecting seeding quality were determined: rotation speed, seeding angle and seeding height. By coupling the discrete element method (DEM) and multi-rigid body dynamics (MBD), the seed breakage rate and seeding performance at different rotation speeds were analyzed. Single-factor bench testing was used to analyze the effect of a duckbill unit on seeding performance under different factor levels. The three-factor and five-level quadratic regression orthogonal rotation center combination test methods were used to obtain the optimal working parameter combination. The test results showed that when the rotation speed was 47 r/min, the seeding angle was 19°, and the seeding height was 180 mm, the qualified index of seeding was 92.03%, the hole diameter qualified index was 91.62%, and the hole distance variation index was 7.17%. This study provides a reference for the research of mechanical rice sprouting seed-metering devices.

This study is aimed at the special working conditions of seeding on sloping land, combining advanced precision seeding technology and the structure of rotary hole filling corn precision metering device seed rowers at home and abroad, and studying soil entry characteristics, the characteristics of soil particles and the seed transport pattern in the puncture process, in order to improve the seed dispersal qualified index and reduce the coefficient of variation in the process of seeding. The simulation test of the cavity-tying device was carried out using the MBD–DEM coupling method, and it can be seen that the rocker bending angle is 120° when the force is the largest; at this time the rocker and the soil force is the largest, indicating the best effect on soil particle separation and the fastest movement speed. The single-factor test determined that the operating speed of the seed rower ranged from 0.8 to 1.2 m/s, the spring preload force of the seed rower ranged from 5.5 to 25 N, and the operating slope angle of the seed rower ranged from 8° to 16°. The optimal structure and parameter characteristics of the rotary hole filling corn precision metering device were determined with a multi-factor test, and it was proven that the rotary hole filling corn precision metering device has better performance and a higher seed rowing quality, with the qualified index reaching 96.2%. This study can provide a reference for the research of corn precision seeders, enrich the form of corn precision seeders, and effectively improve the level of corn mechanized seeding.

The deep application of liquid fertilizer in paddy fields is a fertilization technique that applies liquid fertilizer deep near the root system of paddy field crops, which can effectively improve the absorption rate of the crops and reduce the amount of fertilizer applied. In the cold regions of China, the soil return rate of the furrowing operation of the deep application of liquid fertilizer in paddy fields is low, which can easily cause the excessive liquid leakage of fertilizer and affect crop growth. Therefore, it is difficult to popularize in large areas. According to the characteristics of paddy soil in the cold regions of China and the operating requirements of a high backfill rate and low disturbance rate of the soil of the deep application of liquid fertilizer, this paper designed a bionic liquid fertilizer deep application furrow opener based on the claw-toe structure of the muskrat. In this study, an indoor soil bin test was conducted by constructing a deep application environment for the liquid fertilizer in paddy fields. The results of the soil bin test showed the effects of the key operating parameters of the bionic design of the liquid fertilizer deep application furrow opener, spraying pressure of the liquid fertilizer and operating speed on the furrowing resistance, soil disturbance rate and the leakage amount of liquid fertilizer. The bionic design of the liquid fertilizer deep application furrow opener has a low soil disturbance rate and leakage amount of fertilizer when the operating speed is 0.8 m s−1, and the spraying pressure is 0.2 MPa. This furrow opener significantly improves the operating performance of the deep application of liquid fertilizer in the cold regions of China and is suitable for the deep application of liquid fertilizer in the paddy fields of this region.

This paper aims to solve the problem of high reseeding rates and mis-seeding rates in the rice multi-grain hole direct seeding process. A multi grain cluster air suction type rice hill direct seed metering device was developed, and its seeding mechanism was analyzed. Based on CFD-DEM coupling simulation and bench tests, this study explored and optimized the performance of the seed metering device, and carried out the seeding adaptability test. The simulation results were as follows: when the negative pressure was −5 kPa, the static pressure, dynamic pressure and velocity of the flow field reached the maximum. When the negative pressure was −4 kPa, the qualification index was 89.62%, the reseeding index was 4.36%, and the mis-seeding index was 6.02%. The results of the orthogonal rotation combination test of three factors and five levels showed that when the rotation speed, negative pressure and the length of stirring brush were 20.70 rpm, −4.0 kPa and 10.50 mm respectively, the seed metering performance was the best, the qualification index was 90.85%, the reseeding index was 4.41% and the mis-seeding index was 4.74%. The seed metering device had strong adaptability to the sowing of different rice varieties, and met the agronomic requirements of direct seeding and seeding in rice holes.

Liquid fertilizer has many advantages, such as low production cost and little environmental pollution. Liquid fertilizer open furrow strip application method is widely used in fertilizer application operation. The widely used core-share furrow opener has a high operational resistance, disturbing the soil, hurting the crop roots, causing the liquid fertilizer to volatilize and deteriorating the fertilization effect. In this study, based on the streamline curve of the sturgeon body, we designed several bionic sturgeon liquid fertilizer deep application openers by combining bionics and analyzed the effects of several openers under different operating speeds on open furrow resistances and soil disturbance based on the discrete element method. The mechanism of open furrow resistances reduction and efficient soil backfill of the bionic structure were verified by indoor soil bin tests. The test results show that, compared with the core-share type furrow opener, both open furrow resistances and soil disturbance of the bionic sturgeon liquid fertilizer deep application opener are smaller. This study provides theoretical and practical references for the design of liquid fertilizer deep application openers.