Search

Public buildings are energy-intensive users, especially when energy management is lacking. More than ever, the use of energy efficiency strategies and renewable energy sources (RES) in buildings are a national priority for Morocco in order to improve energy self-sufficiency, replace fossil fuel use and lower energy bills and greenhouse gas emissions. Relating to the exemplarity of the Moroccan government in terms of energy efficiency and sustainable development, the study support that aim and presents results of a deep energy performance analysis of more than 20 university campuses across Morocco, which has concluded that around 80% of the energy consumed in the university campuses is designated for lightning and hot water for sanitary use. Later, this study examined the potential for energy saving and the environmental benefits of implementing actions to reduce energy demand from the grid, considering the use of on-site solar energy. Thereafter, the study aimed to analyze the impact of RES integration in public university campuses, namely the photovoltaic (ESM1) for electricity output and solar thermal system for hot water use (ESM2), to assess the techno-economic-environmental performance on building energy consumption reduction. Hence, the paper reported a detailed energetic-economic and environmental (3E) analysis simulation for campuses by integration of the two Energy Saving Measurements (ESM). The results showed that the integration of ESM1 system can reduce the annual energy demand by 22% and the energy bill by 34%, whereas the integration of ESM2 achieved 67% in energy saving. According to the analysis of the results, the integration of ESM1 is expected to save 6044 MWh of electrical energy annually on the 30222 MWh for all campuses and 2559 MWh for ESM2 which is equivalent to 284 m3/yr of diesel. With the reduced energy consumption, it is possible to cut down fossil fuels for electricity production and offset greenhouse gas emissions by 672 tons of carbon dioxide annually. Besides, the evaluation of results showed that the energy performance indicator was reduced from 530 kWh/bed /yr to 248 kWh/bed/yr, which represents 56% of energy saving.