Search

Microwave absorbers are increasingly being used to enhance shielding performance at higher frequencies. Great effort has been made to develop materials with superior reflection loss (RL), thin thickness, wide bandwidth, and low density to improve their performance in electromagnetic microwave absorption. In this work, the rare-earth intermetallics La2Fe4Co10B fine powders with planar magnetocrystalline anisotropy and high magnetization were prepared using the hydrogenation desorption (HD) technique. By heating the obtained magnetic powders in the air to slowly form an oxide layer on their surfaces, its complex permittivity can be tuned without changing its complex permeability, and its microwave absorption performance can be dramatically enhanced due to the improved impedance matching condition. For the La2Fe4Co10B/paraffin composite, the real part of the complex permittivity at 10 GHz can be reduced from 20.1 to 12.8, decreasing 36.3%. Before the oxidation, the RL of La2Fe4Co10B/paraffin composite is only −14.8 dB at 3.3 GHz under 3.4 mm thickness with an effective absorption bandwidth (EAB) of 0.9 GHz. However, after the 10-hour oxidation, the RL changes to −15.6 dB at 13.4 GHz under 1.4 mm thickness with an EAB of 6.2 GHz. As an efficient and lightweight absorber, La2Fe4Co10B/paraffin composite has potential application value in constructing a new microwave absorber. [ABSTRACT FROM AUTHOR]

Rare-earth transition-metal (R-T) intermetallic compounds are emerging as competitive candidates for novel microwave absorption materials (MAMs) since they show high magnetization and tunable easy magnetization directions (EMDs). In this work, Y 2 ( Co 1 − x Fe x ) 17 (0 ≤ x ≤ 0.3) compounds with the Th2Ni17 hexagonal structure were prepared with the purpose of tuning the EMDs. As x increases, the EMDs of the Y 2 ( Co 1 − x Fe x ) 17 compounds change from the ab-plane (0 ≤ x < 0.0329) to the cone (0.0329 ≤ x ≤ 0.038) and then to the c-axis direction (0.038 < x ≤ 0.3). Furthermore, it was found that the extremely high cutoff frequencies of the uniaxial anisotropy materials give them considerably potential for microwave absorption applications above 10 GHz, despite their relatively low initial permeability compared to the planar anisotropic materials. By studying the high-frequency properties of Y 2 ( Co 1 − x Fe x ) 17 /paraffin composites, it is noted that uniaxial anisotropy compounds with x = 0.1 and x = 0.3 can possess higher permeability above 10 GHz as compared to both planar anisotropy and conical anisotropy compounds (x < 0.1) due to their high cutoff frequencies arising from large magnetocrystalline anisotropy fields. This can improve the impedance matching and thus lead to a better microwave absorption performance in the range of 10 to 40 GHz for materials with uniaxial anisotropy. Among all the compositions, the Y 2 ( Co 0.9 Fe 0.1 ) 17 /paraffin composite exhibits a minimum reflection loss (RL) of −50 dB at 6 GHz with a thickness of 2.5 mm and a wide qualified bandwidth (QB, RL < −10 dB) of 9.6 GHz at a center frequency of 30.3 GHz with a thickness of 0.6 mm, thus making it a promising candidate for MAMs above 10 GHz. [ABSTRACT FROM AUTHOR]

The surface acoustic wave (SAW) propagating characteristics of Y-cut nano LiNbO3 (LN) film on SiO2/LN substrate have been theoretically calculated. The simulated results showed a shear horizontal (SH) SAW with enhanced electromechanical coupling factor K2 owing to a dimensional effect of the nanoscale LN film. However, a Rayleigh SAW and two other resonances related to thickness vibrations caused spurious responses for wideband SAW devices. These spurious waves could be fully suppressed by properly controlling structural parameters including the electrode layer height, thickness, and the Euler angle (θ) of the LN thin film. Finally, a pure SH SAW was obtained with a wide θ range, from 0° to 5° and 165° to 180°. The largest K2 achieved for the pure SH SAW was about 35.1%. The calculated results demonstrate the promising application of nano LN film to the realization of ultra-wideband SAW devices.