Search

Thermoelectric materials have attracted the attention of scientists because they directly convert waste heat of electric energy into valuable electrical energy. In recent years, the boron nitride structure has attracted much attention due to its thermoelectric properties and environmental friendliness. In this paper, the thermoelectric properties of boron nitride nanoribbons were simulated and analyzed, discovering that the figure-of-merit (ZT) value of armchair boron nitride nanoribbons is much better than that of zigzag boron nitride nanoribbons. Subsequently, we discuss the bandwidth effects and edge chirality on two important thermoelectric properties, Seebeck coefficient and ZT. Although edge passivation has been carried out, different edge chiralities still have a significant impact on carrier transport. The development of boron nitride-based materials will clarify their potential for developing high performance next generation thermoelectric devices.

This work aims to give a comprehensive view of magnetic state stability and transformations in PZT-film/FeGa-dot multiferroic composite systems due to the combining effects of size, shape and interfacial coupling strain. It is found that the stable magnetic state of the FeGa nanodots is not only a function of the size and shape of the nanodot but also strongly sensitive to the interfacial coupling strain modified by the polarization state of PZT film. In particular, due to the large magnetostriction of FeGa, the phase boundaries between different magnetic states (i.e., in-plane/out-of-plane polar states, and single-/multi-vortex states) of FeGa nanodots can be effectively tuned by the polarization-mediated strain. Fruitful strain-mediated transformation paths of magnetic states including those between states with different orderings (i.e., one is polar and the other is vortex), as well as those between states with the same ordering (i.e., both are polar or both are vortex) have been revealed in a comprehensive view. Our result sheds light on the potential of utilizing electric field to induce fruitful magnetic state transformation paths in multiferroic film-dot systems towards a development of novel magnetic random access memories.

Phase field simulations are performed to investigate the domain structures of soft ferromagnetic nanodots. It is found that the stability of the domain state is sensitive to its lateral dimensions. As the lateral dimensions increase, the stable domain state gradually changes from polar to vortex, with a transitional region where both the two ordered states are stable. Interestingly, the phase diagram is also a strong function of mechanical loads. By appropriately choosing the lateral dimensions, transformations between polar and vortex states can be induced or controlled by mechanical loads. The study provides instructive information for the applications of ferromagnetic nanostructures.

Micro-electromechanical System(MEMS) accelerometers are widely used in a number of inertial navigation systems and vibration detection system thanks to their small size, low cost and low power consumption. In order to improve their performance, the accelerometers have been designed to compensate the zero-bias caused by process variations. A new method of self-calibration sensitivity applies a self-test structure to simulate standard acceleration; depending on the standard and real-time values of the accelerometer’s output and by adjustment of the time division feedback, the scale factor of capacitive accelerometers can be flexibly adjusted to achieve sensitivity in self-calibrating MEMS accelerometers. Moreover, this research also uses the following: a PID feedback structure to improve the stability of the closed-loop system; a correlated double sampling (CDS) circuit to attenuate noise, which can eliminate zero drift caused by offset voltage of the pre-amplifier; a time division multiplexing electrostatic force feedback circuit to achieve the operation of a closed-loop micro-accelerometer. The structure can completely avoid electrostatic feedback coupling with a capacitance change detection circuit, which can also improve the bandwidth and stability of the accelerometer. By means of capacitance compensation array the zero-bias performance of accelerometers can be improved. The bias stability of the accelerometer can be reduced from 173mg to 31mg by testing.

Pb(Zr0.53Ti0.47)O3 (PZT) thin film was fabricated on Pt/Ti/SiO2/Si substrate by chemical solution deposition method. Our results show a very great switchable ferroelectric diode effect (SFDE) in Pt-PZT-Au structure, which is more obvious and controllable than that in other ferroelectric thin films. The electrical conduction exhibits high rectifying behavior after pre-poling and the polarity of ferroelectric diode can be switched by changing the orientation of polarization in ferroelectric thin film. Our results also indicate that the SFDE in PZT film is highly dependent on remanent polarization and temperature. With the increase of remanent polarization, the forward current of bistable rectifying behavior observably reduces. Therefore, our measurement indicated that the biggest rectification ratio can reach about 220, which is found in 250K after +10V poling. By analyzing the conduction data, it is found that the dominant conduction mechanism of the SFDE in this sample is due to the space-charge-limited bulk conduction (SCLC), and Schottky emission (SE) may play subordinate role in forward bias voltage. Our observation demonstrates that SFDE may be general characteristic in ferroelectrics as long as proper electrodes chosen.

The nonideal factors of a liquid-suspended rotor micro-gyroscope include the gas-liquid two-phase flow voids, medium temperature and its dielectric relaxation, in which the role of the nonideal factors on the capacitor dielectric constant is altered, thereby affecting the capacitance detection precision of the micro-gyroscope. By comparing four different liquid media, the experimental results reveal the nonideal character of the capacitor dielectric constant. The 7# white oil is suitable for use as the liquid-suspended gyro cavity liquid medium.

Conventional methods for rotor position detection of micro-gyroscopes include common exciting electrodes (single frequency) and common sensing electrodes (frequency multiplex), but they have encountered some problems. So we present a high resolution and low noise pick-off circuit for micro-gyroscopes which utilizes the time multiplex method. The detecting circuit adopts a continuous-time current sensing circuit for capacitance measurement, and its noise analysis of the charge amplifier is introduced. The equivalent output noise power spectral density of phase-sensitive demodulation is 120 nV/Hz1/2. Tests revealed that the whole circuitry has a relative capacitance resolution of 1 × 10−8.