Search

An innovation in paper technology that is totally different from the papermaking technology that has been known now, has been found in the 21st century in China. This new discovery paper does not use cellulose fibers as its raw material, and does not use water at all in its production process. Because it is made of inorganic mineral coming from calcite rocks, this paper is called 'rock paper' or stone paper. The process of stone papermaking in principle mixes fine powder of calcite rock with non-toxic resin, one of which is HDPE (high density polyethylene), as well as other additives, then melted at high temperatures and formed into a sheets like paper. The properties of stone paper are very similar and even have advantages compared to conventional paper. This type of paper is claimed to be more environmentally friendly than conventional paper because it does not use plant fibers as raw material, which means there is no trees cut. It can be recycled and produces low greenhouse gas emissions. [ABSTRACT FROM AUTHOR]

Paper is a widely used material that is affected by environmental stresses and makes paper prone to damage. The paper is characterized by the absorption of water and moisture due to porosity, We have overcome this problem by employing polymer materials as water-resistant coatings acting as a barrier to protecting the paper, Polymer paper coating forms a clear membrane on the fiber forming a bridge of monomers on the surface of the paper. Two polymer coatings were used as a treatment, namely Polystyrene and sealer (alkyd resin). The results showed the possibility of enhancing the durability of the paper and preserving it from damage and deterioration. The treatment gave a decrease in moisture content, response to abrasion and scratching while increased folding tolerability, the burst strength, tear resistance, hardness compared to untreated paper and the paper porosity important indicator to overcome. The degree of brightness, the degree of color and visible light and ultraviolet radiation [UV] effect of the specimens were studied in detail. [ABSTRACT FROM AUTHOR]

Pineapple has been known for a number of beneficial biological activities such as anti-oxidative and antibrowning. Some of these bioactivities are contributed by enzymatic complex in pineapple and it can be found mainly in the skin extracted pineapple juice. The purpose of this study is to determine the effect of the pineapple juice as a pulping and bleaching agent in the process of papermaking. During pulping of pineapple leaf fibre, the mixture of pineapple juice/water was added together with a constant amount of 3% Sodium Hydroxide (NaOH) at various concentration of pineapple juice (0%, 20%, 40%, 60% and 80%). Pineapple leaf fibre (PALF) was soaked several times with pineapple juice and NaOH during pulping and bleaching process in order to get the optimum results of the paper sheet obtained. The mechanical and physical properties of paper sheet were studied by measuring its tensile strength, tear resistance and water absorption. Comparatively, paper sheet produced from NaOH pulping shows better mechanical and physical properties than the mixture pulping of NaOH and pineapple juice. Additionally, pulping with higher concentration of pineapple juice tends to give long fibre rather than short fibre. Overall, the results of this study can be used as an alternative way in the production of paper and it also opens a door to utilize wisely the waste residue of pineapple in other sectors. [ABSTRACT FROM AUTHOR]

Paper sheets were produced from bleached kraft pulp, and office and newsprint waste paper. Nanoparticles from black alder bark, grey alder bark and pine bark as well as birch sawdust were obtained for using them as reinforcing fillers in paper. Non-extracted bark and that extracted in biorefinery were used. For producing nanoparticles, the materials were destructed using the thermocatalytic destruction method and then dispersed in water medium in a ball mill. At a sufficient concentration, gel-like dispersions were obtained, which contained nanoparticles with the size ∼300 nm. The dispersions were introduced in paper furnish in different amounts. It has been established that all the nanoparticle fillers increase the tensile index and burst index in dry and wet states. The nanoparticle fillers from extracted bark increase the mechanical indices to a higher extent. At 20% filler content, tensile index in a dry state increases in the case of non-extracted grey alder bark, black alder bark and pine bark by 28, 30 and 15%, and in the case of extracted ones - by 44, 40 and 30%, respectively; the burst index increases by 78, 19 and 4%, and 91, 25 and 14%, respectively. The nanoparticle filler from birch sawdust increases the tensile strength in a dry state by 9% and burst index by 20%. The obtained nanoparticle fillers slightly improve also the water resistance of paper. [ABSTRACT FROM AUTHOR]

CdSe quantum dot has great potential in various applications especially for emitting devices. One example potential application of CdSe quantum dot is security label for anti-counterfeiting. In this work, we present a practical approach of security label on paper using one and two colors of colloidal CdSe quantum dot, which is used as stamping ink on various types of paper. Under ambient condition, quantum dot is almost invisible. The quantum dot security label can be revealed by detecting emission of quantum dot using photoluminescence and cnc machine. The recorded quantum dot emission intensity is then analyzed using home-made program to reveal quantum dot pattern stamp having the word 'RAHASIA'. We found that security label using quantum dot works well on several types of paper. The quantum dot patterns can survive several days and further treatment is required to protect the quantum dot. Oxidation of quantum dot that occurred during this experiment reduced the emission intensity of quantum dot patterns. [ABSTRACT FROM AUTHOR]