Search

Bacterial cellulose (BC) is a type of cellulose produced by bacteria in a glucose-based medium that has more advantages than plant cellulose. The production of cellulose powders, however, has the characteristics affected due to physical treatments; thus, the objective of this research was to produce BC powder for use in paper production. BC was produced by agitation with oxygen flow at various rotational speeds to obtain a fragmented BC phase. BC samples were dried by a spray dryer to produce powder for paper making. The characterization of BC powder and paper samples was done by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), tensile strength, and scanning electron microscopy (SEM). The morphological results showed optimum BC was produced at 300 rpm rotation speed with a 405.2 g yield, while the FTIR spectrum confirmed that the material is a cellulosic compound. TGA characterization of the optimum sample displayed thermal stability at 330 °C in the thermal analysis. Among the variations in rotational speed, the 300 rpm sample led to the highest Young's modulus value, 878 MPa, and the most improved surface morphology. [ABSTRACT FROM AUTHOR]

The coating process on food packaging paper is carried out to improve the food safety aspect from dangerous substance migration from food packaging into food. It can facilitate to increase its function and wide the potency of utilization. The coating materials commonly used are plastic and wax coatings. Chitosan as a natural polymer that has the binding properties both water and oil. Chitosan has polar and non-polar groups thus it is potential to be developed as a coating material for food packaging paper. The purpose of this study was to determine the physical-mechanical and antimicrobial properties of food packaging paper from oil palm empty fruit bunches pulp coated with chitosan. The parameters used were chitosan and pulp weight. The oil palm empty fruit bunch pulp was fibrillated with high speed blender then mixed with chitosan solution. The mixed solution was poured in the mold and dried in an oven at 60°C for 24 hours. The results showed that increasing of chitosan content was coated paper increased physical and mechanical properties values. The more pulp content the higher the physical properties value, however the mechanical properties value tend to decrease. The antimicrobial activity of chitosan coated paper was evaluated by measuring the diameter of the inhibition zones. The results revealed that all tested samples showed growth inhibition zone againts to Escherichia coli and Staphylococcus aureus after 24 h incubation compared to commercial food packaging paper. [ABSTRACT FROM AUTHOR]

Pulp and paper industrial waste or what is known as black liquor contains toxic contents, if not treated first, it can cause environmental pollution. So far, black liquor has only been used for the manufacture of biofuels and fuel for the paper industry, while 46% of lignin is the total solids in the black liquor component itself. This study aims to determine how much the percentage of decolorization of black liquor and producing lignin with bright colors using the coagulation method. The coagulant used in this study was Poly Aluminium Chloride (PAC) with various concentrations (0.5%, 1%, 1.5%, 2%, and 2.5%) v / v. The results showed that the coagulation method proved effective in decolorizing lignin made from black liquor as raw material. The optimum condition to obtain decolorization was 90.44% using 2% PAC coagulant concentration and the total retention time of 24 hours. In addition, FTIR was used to qualitatively analyze the sludge produced during the coagulation process, and the results showed that there are several different groups in the lignin unit. The lignin obtained using the coagulation method produces a brighter brown color, is insoluble in water and odorless with a yield of 38.3%, a pH of 1.68, a purity of 54.8%, and water content and an ash content of 0.2% and 27.2%, respectively. [ABSTRACT FROM AUTHOR]

Mass Oxygen Transfer is a molecular diffusion of gas in a liquid depending upon its characteristics, concentration and cross-sectional area across which diffusion occurs and is accomplished in aerobic digestion of organics through different aeration equipment. Accordingly the comparative evaluation of mass transfer oxygen by different aeration equipment were conducted in existing aeration tanks of Agro Based Pulp and Paper Mill by studying the effect during pre and post injection of liquid oxygen through submerged and floating turbine systems coupled with fine bubble replacing existing coarse bubble diffuser. The dissolved oxygen levels in the second aeration tank (AT2) equipped with submerged turbine has further improved in the range of 2 to 2.5 comparison to lower values up to 1.5 mg/l observed in first aeration tank (AT1) with floating turbine systems. It was further studied that if fine bubble diffuser replacing existing pipe in both the aeration tanks are further coupled with liquid oxygen injection through submersible turbine system in both the aeration tanks shall increase dissolved oxygen levels up to 3-3.5 mg/l besides reduction in energy consumption up to 25% thus lowering overall treatment cost and further improve the treatment efficiencies for reduction a of BOD and COD at the final out let well below compliance level. [ABSTRACT FROM AUTHOR]

Time-limited exposure of electrode-free optically rewritable electronic paper is essential for applications, but performance characteristics can be modest. In this study, we investigate whether image writer mode can improve kinetics of the photosensitive layer order parameter, which is described by the rotational diffusion model. The model that we developed allows adjusting the transmittance spectra of polarizers. We have found that fairly uniform transmittance spectrum of polarizers enables to obtain competitive contrast ratio of 8:1 within 10 s of exposure. In comparison with long-time exposure, the reflectance coefficient is reduced by 24%. Computer-generated image is consistent with the experimental observations. [ABSTRACT FROM AUTHOR]

The influence of the electret on the properties of craft paper modified with polycaprolactone is shown in this article. When applying a polymer coating, a change in the surface properties of the pulp and paper material occurs, which is reflected in the wetting parameters. Processing pulp and paper materials in the field of a unipolar corona discharge leads to an increase in their mechanical characteristics and a decrease in roughness and air permeability. [ABSTRACT FROM AUTHOR]

The micro-fibrillated cellulose crystals from natural cotton fiber via alkaline treatment and acid hydrolysis were explored as possible reinforcement in recycled paper to improve its mechanical properties. Results confirmed the characteristic properties and crystallinity of the obtained micro-fibrillated cellulose crystals. Reinforcement of the micro-fibrillated cellulose crystals in the production of recycled paper showed an improvement in the tensile strength compared to the recycled paper samples without reinforcement or even with kapok fiber/micro-fibrillated cellulose crystals combination. Further improvement on the barrier properties of the micro-fibrillated cellulose reinforced paper via biocoating made from chitosan/starch blend resulted to a 27.69% decrease of the water absorption capacity compared to uncoated sample using the Cobb test. [ABSTRACT FROM AUTHOR]

Borassus flabellifer L. becomes one of the palm-based commodities in Indonesia that can grow well in dry areas, especially around the north coast of Java Island. An abundant waste of this plant, in the form of leaf midrib and fruit fiber, has a potential as a source of lignocellulose for the paper industry. In the present study, Kraft paper production was conducted to know the influence of the proportion of leaf midrib and fruit fiber of Borassus flabellifer L., and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of Kraft paper. The research method was a Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of Kraft paper. The ANOVA analysis was used to examine the physical quality of Kraft paper. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but insignificant between treatment of Gramatur and tear resistance. The best treatment of sensory tests was Kraft paper with proportion of 50% leaf midrib pulp, 50% fruit fiber pulp, and 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, Gramatur of 162.80 (g/m²), tensile strength of 1.70 (%), and tear resistance of 197.6 (gf). [ABSTRACT FROM AUTHOR]

Low cost disposable, paper chip has been fabricated by dip coating solution processed NiO nanoparticle on filter paper. NiO nanoparticles were prepared by a reliable, straightforward precipitation method and thermally decomposed at higher temperatures. Adsorbed NiO nanoparticles strongly modulate the fluorescence properties of filter paper leads to the quenching effect, due to the coverage of NiO nanoparticles on microfibrous cellulose filter paper. Bright field and fluorescence imaging were carried out with different concentrations of NiO nanoparticles, which shows efficient autofluorescence quenching of 90.02 % on the filter paper. [ABSTRACT FROM AUTHOR]

Chitosan is natural polymer that has nontoxic, biodegradable and biocompatibility material. Chitosan has been investigated as papermaking additive to improve properties of paper such as physical and optical properties. The objective of the research was to investigate the effectiveness chitosan in papermaking process and to determine the effect of chitosan on properties of paper. Chitosan was added in papermaking process with different dosage 0.5, 1, 1.5, and 2%. The efficiencies of Chitosan in papermaking can be obtained by measuring and analyzing of properties of paper, such as physical and optical properties. The increasing dosage of chitosan, will increase the physical properties of paper, such as tensile strength and decrease water absorption of paper, but will not influence the brightness of paper. The optimum concentration of chitosan used in paper in this study is 1.5%. The result shows that chitosan used in paper can improve the properties of paper. [ABSTRACT FROM AUTHOR]

The study aims to produce concrete using various percentages of hypo-sludge ash (HAS) in place of cement. The waste paper sludge ash is composed of magnesium oxide and calcium oxide. Therefore, it can be tested as an innovative cement replacement, providing a solution for traditional concrete. For this study, the various proportions of ash used are 5%, 10%, and 15% by weight of cement. The mixed design carried out was as per the Indian standard code. The ingredients used for concrete making are cement, aggregates, hypo sludge ash (HSA), superplasticizer, and water. A test mix was carried out to check the behaviour of a concrete mix, and its physical and hardening properties were checked. Cube samples were cured for 3, 7, 14, and 28 days to check hardening properties. Experimental analysis shows that by replacing 5% cement with HSA, the strength results obtained are close to the reference concrete. [ABSTRACT FROM AUTHOR]

Nanotechnology allows the automation of tasks and greatly advances the industrial revolution. There are numerous applications of nanotechnologies in various industries. Some of them are in the electronics, pharmaceutical industries, packing papers and printing, food and beverages industries, paper and pulp industries, textile industries, and construction industries. In nanotechnology, there are so many different Nano devices like smart semiconductor nanocrystal, carbon Nano tube, graphene, nanoscale CMOS devices etc. In this review paper, fabrication technology of carbon nanotubes (CNTs) has been explained. Techniques for fabricating carbon nanotubes have been described. The advantages of Nano devices in the future manufacturing and industrial applications by automation of systems are elaborated. [ABSTRACT FROM AUTHOR]

The rapid development of the industrial sector has increased either energy demand or generate a tremendous effect on waste piles. To combat the issue of poor sanitation due to waste accumulation and multiply the energy sources, the government promotes energy diversification, particularly dealing with waste management. This study aims to recycle plastic waste, paper waste and sawdust into solid fuel briquettes while observing their physical and combustion properties. Briquette production is carried out by combining waste of plastics and sawdust with binding agents, such as paper pulp and cassava starch. These materials were mixed with water, being compacted and conventionally dried under the sunlight. Solid briquette was then tested for calorific value, moisture content and volatile matter to ensure the effectiveness of combustion. The results show that the modified composition of plastic and paper with the ratio of 3:1 is physically sturdy with minor cracks, has a greater calorific value of 6801.62 Cal/gr, low moisture content (4.73%) and volatile matter (5.50%). The modified composition of paper: plastic: sawdust with the ratio of 1:1:1 exhibits more sturdy stuff, with a calorific value of 4565.47 Cal/ gr, low moisture content (1.85%) but high volatile matter (34.07%). Waste conversion to solid fuel briquette can be utilized as future green energy alternative in any major cities of Indonesia. A modified mixture of plastic : paper waste is more prone to transmit the heat despite having less capability to ignite, while the mixture of sawdust : paper is more prone to ignite despite having less capability to store and dismiss the heat. [ABSTRACT FROM AUTHOR]

Historians and librarians are interested in watermarks and mould surface patterns in historic papers, because they represent the “fingerprints” of antique papers. However, these features are usually covered or hidden by printing, writing or other media. Different techniques have been developed to extract the watermarks in the paper while avoiding interference from media on the paper. Beta radiography provides good results, but this method cannot be widely used because of radiation safety regulations and the long exposure times required due to weak isotope sources employed. In this work, two promising methods are compared which can be used to extract digital high-resolution images for paper watermarks and these are electron radiography and low energy X-ray radiography. For electron radiography a “sandwich” of a lead sheet, the paper object, and a film in a dark cassette, is formed and it is exposed at higher X-ray potentials (> 300 kV). The photoelectrons escaping from the lead sheet penetrate the paper and expose the film. After development, the film captures the watermark and mould surface pattern images for the paper being investigated. These images are then digitized using an X-ray film digitizer. The film employed could potentially be replaced by a special type of imaging plate with a very thin protection layer to directly generate digital images using computed radiography (CR). For the second method, a low energy X-ray source is used with the specimen paper placed on a digital detector array (DDA). This method directly generates a low energy digital radiography (DR) image. Both methods provide high quality images without interference from the printing media, and provide the potential to generate a “fingerprint” database for historical papers. There were nevertheless found to be differences in the images obtained using the two methods. The second method, using a low energy X-ray source, has the potential to be integrated in a portable device with a small footprint incorporating user safety requirements. Differences obtained using the two methods are shown and discussed. [ABSTRACT FROM AUTHOR]

The paper aims to study more about young entrepreneur participation toward halal food industry. Many studies stated that halal food industry demand is growing rapidly in both Malaysia and global. The current situation in Malaysia is precisely targeting the youth to act as organizer and participant in Malaysia halal food industry. The factors which may influence the participation of young entrepreneurs includes job happiness, intention, perception, attitude, social norms, perceived behaviour, and financial. [ABSTRACT FROM AUTHOR]

Industrial waste is a by-product of industrial processes from waste material or building material. The study was conducted to analyze the used of solid waste pulp dreg and grits through chemical characterization to make bricks. In brick formation, the CaO content is very important because it functions as an adhesive and from its characterization shows the CaO content is 58.10% in dregs and 59.76% in grits. From the research method carried out by mixing dreg and slaker grit waste with other materials, the best results were obtained at the maximum value of the compressive strength of quality I brick is 7 Mpa (SNI; 3.5 Mpa). Characterization of material used Scanning Electron Microscope (SEM), X-Ray Fluorescence (XRF) and IR Prestige-21 instruments to analyze the chemical content of the waste. Universal Testing Machine (UTM) was used for compressive strength analysis using material strength when given a load with certain pressure. The result showed that the best which for bricks that lower water absorption and bricks that have large compressive strength value 7 Mpa. [ABSTRACT FROM AUTHOR]

The aim of study is to design a Microstrip Patch Textile antenna using Jeans substrate (Dielectric constant is 1.7) to obtain the Return loss and it is compared with Paper substrate antenna (Dielectric constant is 3.6) which was designed at 2.4GHz. The Rectangular microstrip patch antenna which uses Jeans substrate with the thickness as 1.6mm (Group1) and with the thickness 1.4mm (Group 2) and patch antenna which uses Paper substrate with thickness 1.4mm (Group3) and with the thickness 1.6mm (Group 4) are designed and simulated with HFSS. For each group 10 samples are taken for the analysis using SPSS. The significance p<0.05, indicates that the antenna performance is good. The Experimental results show that the Jean substrate antenna (1.6 mm) which is designed at 2.4GHz is having the Return loss of -0.0338dB and (1.4 mm) is having Return loss of -0.006dB. The Rectangular Microstrip patch antenna which is designed using Paper Substrate (1.6 mm) having Return loss of -0.0756dB and paper substrate (1.4 mm) is having Return loss of -0.037dB at 2.4GHz. The microstrip patch antenna which is designed using jeans substrate is having significantly better performance when compared to the microstrip patch antenna using Paper substrate while considering its Return loss parameter. [ABSTRACT FROM AUTHOR]

Nowadays, BLDC motors have become important motors for their many applications. Some of these applications require precise position and speed control, such as paper and textile mills, robots and CNC machines, etc. These and other applications require an accurate tracking trajectory of the movement. In this paper, design a cascade P-PI controller to control the position of the BLDC motor. This cascade controller consists of three controllers, one for current control, one for speed control, and the last for position control. In addition, the DC-link current can be used in block current control. Parameter values of these three controllers are calculated and extracted using the two new methods which are: SSO and GWO. The simulation result proves the power of the cascade P-PI controllers to reject disturbances, in addition, the results showed SSO Algorithm is better than the GWO algorithm. [ABSTRACT FROM AUTHOR]

Severe Environmental problems arises across the world due to accumulation of paper waste as landfills large quantity of resources are being utilised by the construction sector, creating a huge demand for construction materials. This paper presents an experimental study carried out by utilising waste paper in concrete Bricks which is a new innovation composite material. An experimental study on compaction strength, weight, water absorption characteristics subjected to sun dried and water curing methods of casting were studied in details. It was observed that usage of paper in concrete has good strength, toughness, has reduction in weight of the brick considerably and also had a low thermal conductivity. [ABSTRACT FROM AUTHOR]

Machine calendaring is a finishing operation used in paper industry during which paper web is pressed between two or more steel rolls, with an objective to improve the surface properties like smoothness and gloss of the paper web. In this study an attempt has been made to develop modified nip mechanics model, which overcomes the drawbacks of existing nip mechanics models, applicable for machine calendaring in paper industry for calculating nip width. Also the effect of various calendaring parameters on nip width of machine calendar has been discussed. [ABSTRACT FROM AUTHOR]

Now a day face detection & facial expression recognition is one of the major challenging problemin the field of image processing. It is a challenging issue as human color, pose, expression, and orientation varies with regions. Therefore, to detect face & facial expression we need to accept different models & techniques. Detection of different facial expression based on movement of eyes, position of nose & nose tail, gradient of eye brows, movement of lips etc. Detection of facial expression can be done with the help of any neural network or fuzzy logic. This paper reviews different techniques of face detection & facial expression recognition. [ABSTRACT FROM AUTHOR]

In the present scenario, the world has a greatest interest in moving from petroleum products to non-conventional energy sources. The non-conventional energy is very popular in these days because it is cost effective solution for providing energy to the rural area where it is difficult to provide electricity. Generation of electricity through non-conventional sources is pollution free, contamination free energy, limit carbon impression and nursery outflows and guarantee energy security. This paper describes the stability study of distribution generation system under varying loading condition. This study work describe that how to maintain stable output of hybrid system by using FACT devices [2]. Firstly the capacity to meet the heap necessities from solar standalone system is dissected after that hydro standalone system is analyzed. Following this the feasibility examination of a hybrid system (solar and hydro) energy sources has been completed [8]. The important objective work of this paper is to investigate, how maximum and stable power is achieve by using latest techniques in hybrid (solar and hydro) system. [ABSTRACT FROM AUTHOR]

The drape is a fabric's ability to deform when suspended under its weight in specified conditions of known size using a Drape Meter. The Drape Coefficient % (DC%) is calculated by taking the weight of paper cut out based on the shadow of the fabric. A fabric property is very important in relating to the behavior of drapes and these factors were determined by earlier researchers in developing a tool to measure drape. The Cusiks's Drape Meter was the first equipment that used the principle of shadow in reflecting the drape behavior and later on calculating the DC%. The principle introduced by Cusick has been used by a lot of researchers to determine DC% more accurately using computer captured images. In recent years, a lot of research has moved forward using software to calculate the DC% by incorporating the values of fabric properties to create an image for the drape. A lot of work on comparing the values of DC% using conventional and simulated/virtual methods was published. The usage of particular software can predict the DC% before the actual production of fabrics. Prediction can be made based on physical properties needed on particular fabrics to be produced and thus saving a lot of time and giving more choices in fabrics selection. [ABSTRACT FROM AUTHOR]

Computational thinking is a way of thinking for problem solving and is one of the basic skills of the 21st century that is very important to be applied in science learning as an effort to prepare for disruption in the industrial era 4.0 and society 5.0. This study aims to find a new method that has proven its effectiveness to apply problem solving skills. The Research and Development (R and D) method with the ADDIE model (Analysis, Design, Develop, Implementation and Evaluation) was carried out to develop a Problem Project Based Learning (PPjBL) model with a Computational Thinking (CT) approach based on CoSpaces-Edu Paper Cube Augmented Reality. This research has produced a product in the form of a Problem Project Based Learning (PPjBL) model with a Computational Thinking (CT) approach based on CoSpaces-Edu Paper Cube Augmented Reality which has been validated by experts on very feasible and effective criteria to be applied as a science learning design. [ABSTRACT FROM AUTHOR]

One of the relatively inexpensive alternative energy sources in terms of production and relatively environment friendly was the development of bioethanol from urban wastes that contain many lignocellulose such as paper waste. This study characterizes the composition of cellulose, hemicellulose and lignin in blank HVS paper, inked HVS and newspaper. The results showed the predominate cellulose (49-60 %) while the lignin concentration was very low due to the removal of colors (lignin) in the manufacturing process. The experiments continued with synthesis of bioethanol through Simultaneous Saccharification and Fermentation (SSF) process. A combination of enzymes (Cellulase + Cellobiase) in 1:1 weight ratio and Saccharomyces cerevisiae was used for hydrolysis and fermentation in the SSF process. Paper waste from newspapers, inked HVS, and empty HVS papers were used as raw materials. The initial pH of SSF in the column was at pH 5. Variation of enzyme concentration was carried at 0.2, 0.3 and 0.5 g. The SSF process was carried out at incubation time of 6, 12, 24, 36, 48, 72, and 96 hours. The ink affected the concentration of bioethanol produced. In this study, the best bioethanol content was produced by inked HVS and Newspapers at 0.5 grams of enzyme with a concentration of 1531 and 1111 ppm, respectively. [ABSTRACT FROM AUTHOR]

In order to increase energy security or to reduce diesel engine exhaust emissions, the use of biodiesel fuel is continuously increased. This effort is carried out by increasing the composition of biodiesel in the biodiesel blends. One of other considerations regarding the use high composition biodiesel blends above 20% (B20) is the concern of fuel filter blockage or shorten the life time. Various efforts have been done to overcome filter blocking problems due to the use of biodiesel, so that mitigation can be carried out. One of the evaluations of the effect of using palm oil biodiesel with a high composition above 20% has been carried out by acceleration testing in a test rig with additional dust contaminants. The test used fuel filter paper with a porosity of 30 micron with variations in the composition of the test fuel, namely pure diesel/B0 (Pertadex), B30, B50 and B70. The test was carried out by flowing the test fuels through filter paper in a DENSO standard test rig in temperature ambient (around 29°C). Filter blocking was recorded by the differential pressure (delta pressure) between before and after of the test filter paper. The results show that for the pure diesel and biodiesel blends without any contaminants, there is no increase in the differential pressure. Otherwise, for the addition of 3 grams of contaminants per 15 liters of test fuels, a higher biodiesel composition will result in a faster increase in the filter differential pressure. [ABSTRACT FROM AUTHOR]

Paper-making raw materials are a mixture of pure wood pulp and recycled pulp. Recycled pulp is obtained from used paper imported from abroad, in addition to the development of paperless culture also has an impact on the reduced availability of raw materials. Empty bunch fiber of palm oil is one of the natural materials that have the potential to be used as an alternative to a pulp for the manufacture of cardboard paper because it has a high holocellulose content. This study has successfully developed cardboard paper developed from oil palm empty fruit bunch pulp with 6 variations of treatment, steam, no steam, NaOH 2.5%, NaOH 5% and mill duration (20 minutes and 30 minutes). The developed cardboard paper is then tested for its water absorbency. Water Absorbency value testing is done by the Cobb method (60). Based on the test results obtained the water absorption values is in the range of 500 - 600 g/m2. Cartons that received treatment, no steam, added NaOH 2.5%, and milled for 30 minutes, has the lowest water absorption value compared to others. [ABSTRACT FROM AUTHOR]

This paper describes the fabrication and high-temperature mechanical properties of functionally graded materials (FGM) based on preceramic papers with Ti3Si(Al)C2 and Ti3Al(Si)C2 powder fillers. The FGMs with different architectures were fabricated by spark plasma sintering at a temperature of 1050°C and a pressure of 50 MPa. Mechanical testing of composites at 25℃ and 1050℃ demonstrated the brittle to plastic transition of fracture mechanism. At 1050 ℃ FGMs demonstrated strain for up to 1.5 % and flexural strength about 200 MPa. Due to migration of Al from A-site of MAX-phases and formation of Al2O3 a crack healing was noted after high-temperature mechanical tests. [ABSTRACT FROM AUTHOR]

The development of technology in the era of data transfer technologies over the internet has increased interest in data preservation. This data can contain sensitive and personal data such as medical data, personal photos, and bank information. However, the data is always at risk, it can be used to steal, blackmail, or even threaten safety. Video steganography is the most interesting hiding method to conserve data by hiding secret information in video frames. The video has a complex structure and can have a large amount of confidential data, making it better than other hiding techniques such as text and images. Moreover, data protection will double if this data is encrypted before the merge with video steganography. This paper focuses on comparing various video steganography and cryptography techniques. Also, an analysis of the evaluation parameters for cryptography and steganography techniques. Overall, this paper gives a comprehensive understanding of data protection techniques. [ABSTRACT FROM AUTHOR]

The transition from conventional paper-based records to technologically enhanced Electronic Health Records incorporating federated learning has played a crucial role in the dynamic field of healthcare. This paper provides a comprehensive examination of the evolution of health record systems, encompassing a thorough analysis of the historical development and technological achievements within this field. The focus is directed on doing a comparative analysis of efficiency, accuracy, and data security at each stage. Moreover, the present study investigates the effects of federated learning on the preservation of data privacy and the facilitation of collaborative medical research within the context of modern healthcare environments. The primary findings indicate that despite ongoing hurdles, the integration of electronic health records (EHRs) with federated learning holds significant potential for advancing patient care to an unprecedented degree. This study is of relative interest to practitioners, researchers, and stakeholders. [ABSTRACT FROM AUTHOR]

This research aims to identify journals, authors, and papers related to influencer marketing and its applications within five years (2018-2022). It uses bibliometric methods and the Scopus database to identify 144 documents in journal articles and conference proceedings. The results showed that more than 85% were journal articles, and the rest were conference papers. During this period, 359 authors were found, with 16 authors being single authors and 343 authors being multiple authors. Despite the relatively small number of articles, the number of citations reached 2518 in Scopus, and the average number of citations per article was 19.26. Liselot Hudders, with four publications affiliated with Universiteit Gent, Ghent, Belgium, was the main contributor to this study. Regarding sources, the Journal of Digital and Social Media Marketing ranked her at the top of the five most essential sources for research on influencer marketing. The results show that "social media" is the top keyphrases and will continue to grow from 2017 until its peak in 2022. It was followed by "social media marketing" and "Instagram." These three are the most important keywords during this period, which allows us to see the development trend of influencer marketing. [ABSTRACT FROM AUTHOR]

Nowadays, induction machines can be considered the backbone of various industrial applications due to the many characteristics such as rigidity, simplicity, high reliability, and low maintenance that can be manufactured for a long time. However, poor efficiency and power factor and increased amounts of torque ripple and losses significantly impact the performance and hence its efficiency. Therefore, in order to improve the performance of induction machines, the special design topology for stator and rotor configurations must be investigated and correctly estimated. This paper presents the analysis of the variable geometries of the cage's rotating bars. More specifically, the influence of dimensions and positions, as well as the shapes of the rotor rods, have a significant impact on the dynamic performance (developed torque, starting torque, ripple torque, starting current, power factor, harmonics, output power, and efficiency) are investigated. The Finite Element Method (FEM) is used to create the optimum designs as well as calculations are used to optimize the shapes of rotor slots in order to improve starting performance characteristics such as starting current, initial torque, magnetic flux connection under starting conditions, and efficiency. Furthermore, the characteristic of the manufacturing material of the rotor are examined, and methods to reduce losses for an induction motor to enhance efficiency are examined. This paper focuses on the squirrel cage induction motor (SCIM). [ABSTRACT FROM AUTHOR]

Energy transition from fossil energy to renewable energy (green energy) which is more environmentally friendly has been regarded as an utter necessity that requires policy. The study presented in this article is aimed at optimizing development of green energy in a situation of fluctuating fossil energy prices. The method used is a paper review and comparative quantitative-qualitative analysis, Strengths Opportunities Aspirations Result (SOAR) analysis on secondary data supported by empirical information in the energy industry. The paper on the topic of marketing strategy for the development of renewable energy using SWOT analysis was chosen as a comparison for the analysis of development through SOAR. Furthermore, the results of the comparison between SOAR and SWOT analysis are used as the basis for selecting alternative strategies. Exploration and exploitation of fossil energy requires a high investment, so optimizing fossil energy requires technology that is able to convert this energy into a more environmentally friendly, the management of fossil energy carried out five pillars, namely human resource development, application of new technology and information systems, processes, manufacturing, environmental protection, health and sustainability. Some examples of activities that have been carried out include the construction of solar-based power plants, micro hydro, and the development of bio gas. Greenovator programs that benefit the environment and society. The result of this review on the proposed alternative solutions for green energy development using and encourages a symbiosis between the governments - the community - the fossil energy industry - the green energy industry. As an alternative strategy towards optimizing the development of renewable energy, the use of fossil energy is still needed in the transition energy because the fossil energy industry can be in line with renewable energy development in Indonesia. [ABSTRACT FROM AUTHOR]

Herein we report the facile synthesis of silver nanoparticles (AgNPs) via the green synthesis method using mangosteen (Garcinia Mangostana L.) peels waste extract (MPE) as the bioreducing agent. The synthesized AgNPs were employed as the probe in the paper-based colorimetric detection of Pb2+. Initially, the MPE was prepared using a reflux system for a 3 h reaction, followed by mixing the AgNO3 precursor and the prepared MPE, then left undisturbed for a 6 h reaction until a dark brown solution of AgNPs was obtained. The AgNPs showed a strong visible absorbance peak at 415 nm that indicated the AgNPs were successfully formed, whereas there was no peak observed at 415 m for the MPE. Further investigation, the IR spectra revealed that the OH-groups of flavonoids derivative in the MPE have a main role in the AgNPs formation, while the XRD pattern confirmed the prepared AgNPs have face center cubic structure with the crystalline size of 11.38 nm as well as the SEM characterization showed a spherical to triangle morphology of AgNPs. The paper-based-colorimetric performance evaluation showed a wide linearity range from 8 ppb to 100 ppm with a limit of detection (LOD) less than 12.50 ppm and high selectivity toward Pb2+ instead of Zn2+, Mg2+, Na+, and K+ at 30 min reaction, indicating the green synthesized AgNPs have the potential for probe in colorimetric sensing. [ABSTRACT FROM AUTHOR]

The modification of the metal surface is one of the efforts used to increase the bonding strength to provide a good deposite for the hydroxyapatite layer. This study aimed to determine the effect of abrasive paper roughness and alkali heat treatment on 316L stainless steel for hydroxyapatite coating. The surface of the 316L stainless steel substrate was roughened using SIC paper 80, 400 and 1200 grit. Then soaked with sodium hydroxide (NaOH) solutions for 24 hours at a temperature of 40 °C and then the substrate was sintered at a temperature of 500 °C, 600 °C and 700 °C with a holding time of 1 hour. The coating process is carried out using a dip coating method by immersing the substrate into the hydroxyapatite slurry and sintered at a temperature of 750 °C. The result of this study shows that sodium chromium oxyde (Na4CrO4) was successfully formed on the metal surface of 316L Stainless steel. The highest and lowest shear strength values were obtained on 80 grit samples with heat treatment temperatures of 700 °C and 600 °C, respectively 4.685 MPa and 0.465 MPa. The thickness of the hydroxyapatite (HA) layer on 316L stainless steel obtained was 51.68 µm; 58.28 µm; 73.63 µm and 70.13 µm. [ABSTRACT FROM AUTHOR]

"Virtual is Reality". Human beings always want to achieve more and more, want to explore more and more. Whether it is an area of Medical Science, Automotive, History Science, or Universe. We are presenting this paper to explore the Digital World's main areas called the Metaverse. Since 2020 during and post-COVID digitization keep pace in almost all domains and now it is part of human life starting with Online New papers to online classes / online medical consultancy, online payments, and many more. COVID restricts human beings, especially tour tourism & traveling, Metaverse is one of the key mantras which make it possible for a human being to travel anywhere without leaving his/ her place. But, does Metaverse has also any restrictions? Does Metaverse have any rule/regulation/policy framework on usage? Does Metaverse meet the service quality? [ABSTRACT FROM AUTHOR]

The professional skills required to be a successful engineer continue to grow and expand as the engineering disciplines evolve. In the United Kingdom, the Engineering Council has released the latest version of the Accreditation of Higher Education Programmes (AHEP). AHEP4 as it has become known covers a wide range of topics central to engineering disciplines. As well as traditional core professional and subject requirements for engineering this document introduces challenges for the future such as sustainability, EDI, and cybersecurity. In addition, there is an expectation that appropriate digital skills for engineers form part of the toolkit for engineers as they move towards chartered engineering status. This paper discusses the digital skills that will enable engineers to develop their skill set as engineering professionals, enhance their employability by developing digital skills in the context of their engineering specialism and ensure that they have the digital skills to enable their activities to contribute to the betterment of society. In the paper the work done to embed digital skills in the engineering curriculum will be discussed. We will then go on to discuss the work done with engineering employers to identify the digital skills expectations for graduates entering employment and finally how the continued professional development process for digital skills can be embraced as engineers move through their careers. The session will conclude with a discussion on how colleagues from the UK and from Malaysia can work together to develop a framework to support engineers in developing their digital skills. [ABSTRACT FROM AUTHOR]

Chlorine-based bleaching agent can brighten the pulp effectively, but it harms the environment, especially water pollution. Thus, hydrogen peroxide, a total chlorine-free (TCF) bleaching agent is applied in this research to bleach pulp derived from Sesbania grandiflora. Sesbania grandiflora is being chosen as raw material due to its ideal characteristics as pulp source and native in Malaysia. This research aims to determine the effects of hydrogen peroxide on Sesbania grandiflora pulp and evaluate the paper properties made from Sesbania grandiflora pulp. The research was carried under different bleaching durations, 20 minutes, 40 minutes and 60 minutes under a constant temperature of 50°C and 3% concentration of hydrogen peroxide. The physical, optical and mechanical properties of Sesbania handsheet were measured according to the standard TAPPI. The overall result presented a significant effect on kappa number and handsheet brightness but little on mechanical properties. The longer bleaching duration gave the least kappa number of the Sesbania pulp, thus, improving the brightness of the Sesbania handsheet. However, it did not affect the strength properties of the handsheet. In this research, 60 minutes of bleaching duration on Sesbania grandiflora pulp exhibits the optimal bleaching performance without compromising paper mechanical properties significantly. [ABSTRACT FROM AUTHOR]

Whiteness is one of the most important characteristics of a printing paper. There is a stable relationship between the printed and optical properties of the paper. At the same time, the understanding of whiteness in the paper-making and printing industries is significantly different. Such miscommunication negatively affects the quality of printed products, since the choice of a suitable paper (or cardboard) is difficult to a certain extent. One of the ways to get out of this situation is to create a simple and clear computational model of the white paper, which would not depend on any physical standards. The model would help when conducting the input control in printing plants and would allow one to establish communication between industries. This work is devoted to the description of such a model. [ABSTRACT FROM AUTHOR]

Residuals from pulping process of Iraqi pulp and papermaking factories was taken to produce a thermal insulator by wetting, crushing, and pressing to a certain shape to get a board called by the authors as "Cellulose Board" that can be used as a thermal insulator for air conditioning and piping systems carrying hot water for heating. It was found that thermal conductivity of cellulose board is 0.0311 W/m.c hence it can be compared with common thermal insulators such as rock wool and fiber glass which is expensive from economic point of view. It is recommended to use vapor barriers to prevent board from getting moisture. Additionally, it is recommended not to use Cellulose Board in a high temperature application. [ABSTRACT FROM AUTHOR]

Five fuels were tested in a common rail direct injection (CRDI) diesel engine to see how they affected soot particle distribution and the engine's controlled and unregulated emission characteristics (M15, M25, and M35). The findings demonstrated that regulated emissions of carbon monoxide (CO), hydrocarbons (HC), and particulate matter (PM) could be efficiently controlled to a very low level when mahua oil biodiesel (MOB) in diesel was utilized in conjunction with ideal engine working situations. Paper filters were employed to remove diesel dust. Entire particulate matter main particles were < 100 nm in width, with the average diameter for the biodiesel mixes falling among 20 and 26 nm. PM particles had uncontrolled emissions including Pb, Mn, and Ba, while M100 had 56.72% fewer xylene emissions, 22.49% fewer toluene emissions, and 19.45% fewer benzene emissions compared to M0. As a result, MOB is a wonderful option for reducing pollution from diesel engines and other sources, both in the form of controlled and unregulated emissions. [ABSTRACT FROM AUTHOR]

The selection of packing materials is an important factor to prolong the shelf life of food products, especially for perishable foods or produces. This research was conducted to determine the effect of packing materials (papers and plastics) on fresh Brazilian spinach leaves quality such as moisture content, water activity and total color difference (ΔΕ). The samples were stored at ambient temperature (25 °C) for 16 days. The moisture content and water activity of the samples were measure by moisture analyzer and water activity meter, respectively. The total color difference (ΔΕ) was calculated based on L*, a* and b* parameters. Generally, based on overall results, the packing materials significantly affected the quality of fresh Brazilian spinach leaves throughout 16 days of storage period. The results asserted that the paper materials are not suitable to use to pack fresh Brazilian spinach leaves for long period. It is also not recommended to use any paper material to pack fresh produce, especially perishable vegetables and fruits, in protecting their quality. The use of HDPE and PP plastics is recommended to prolong the shelf life of the fresh Brazilian spinach leaves. However, it has a limitation in controlling the changes of leaves color. [ABSTRACT FROM AUTHOR]

Notwithstanding the developing interest and conversations on Augmented Reality (AR) on smart campus, we don't yet know methodicallly, the information that has been worked from scholarly papers on AR in smart campus; if furthermore the way in which AR research meet, the approaches used to explore AR in tourism, and the emerging contexts AR has appeared smart campus research. By directing a deliberate writing survey on AR research in smart campus, this work looks to reply four importantly research questions: (1) Where AR technology research emerged in?; (2) Which Role of the Mobile Augmented Reality System (MARS) stand out enough to be noticed in smart campus research?; or (3) Comparison of Features in The Campus Tour Guide Application utilised to research AR in smart campus?; Overall, the findings show that smart campus arisen as the most well-known settings. Notwithstanding, issues with heterogeneity showed up in phrasing use close by an absence of hypothesis based exploration in AR. Likewise, holes were distinguished where difficulties recognized rotated around consciousness of the innovation, convenience, and time responsibility. [ABSTRACT FROM AUTHOR]