Search

Fluid-assisted mass transport reactions by dissolution-precipitation, where a precursor mineral reacts with a fluid, play an important role in metamorphism and metasomatism. We investigated titanite growth on rutile in time series experiments between one and 107 days at constant P-T conditions of 600 °C and 400 MPa in the system TiO2-CaO-SiO2-Na2O-HCl-H2O. A two-capsule assemblage allows for transport of Ca and Si from dissolving wollastonite to dissolving rutile, the Ti-source, in a NaCl-bearing aqueous fluid, according to the general reaction CaSiO3 + TiO2 = CaTiSiO5. Complete overgrowth of rutile by titanite occurred after just one day of experiment. Fine-grained lozenge-shaped titanite crystals of short-time runs (up to 14 days) reorganize to larger predominantly prismatic crystals after >14 days. After investigation by scanning electron microscopy, the titanite overgrowth was removed from the rutile by hydrofluoric acid, to provide a three-dimensional view of the dissolution-reaction front on the rutile surface. The morphology of the rutile surface is dominated by humps or ridges beneath the central region of a titanite crystal and valleys at the grain boundaries between adjacent titanite crystals. The dissolution pattern on the rutile surface mimics the titanite overgrowth and changes with changing grain size and shape of the titanite with longer run times. The preferred dissolution of rutile in the valleys is clearly linked to the position of the titanite grain boundaries, which served as pathways for fluid-assisted element transport. Rutile-titanite and titanite-titanite boundaries show a significant porosity in transmission electron microscopy images of foils prepared by focused ion beam milling. The large-scale dissolution pattern on the rutile surface is independent of the crystallographic orientation of the rutile and entirely dominated by the arrangement of titanite crystals in the overgrowth. Dissolution features on a scale smaller than ~1 µm are dominated by stepwise dissolution and etch-pits following the crystallographic orientation of the rutile. Similar observations were made in experiments with an additional Al-source, although these experiments result in a different overgrowth pattern; i.e., an exposed rutile surface is always present and solitary titanite crystals are accompanied by partial overgrowths. Quantitative characterization of the surface morphology by white-light interference microscopy demonstrates that, with increasing grain size of titanite, dissolution of rutile is strongly enhanced at the titanite grain boundaries. Natural examples of titanite overgrowths on rutile show the same relations between element pathways, arrangement of titanite crystals and 3D dissolution pattern on rutile as in the experimental systems. We conclude that the transport of Ti away from the rutile and of Ca + Si into the reaction rim occurred in a grain boundary fluid, the composition of which must have been strongly different from the composition of the bulk fluid in the experiment, as well as in the natural system. The reaction progress depends on the availability of a fluid, and relicts of rutile in titanite indicate restricted availability of fluid in the natural system (e.g., a fluid pulse that was consumed by the reactions). The reaction examined here can serve as a proxy for other reactions of the conversion of oxide minerals (e.g., spinel or corundum) into silicates. [ABSTRACT FROM AUTHOR]

Chemical zoning according to the substitution Al + (OH,F) = Ti + O is a common phenomenon in natural titanite and can be used to reconstruct its growth conditions. We synthesized titanite, which has a zoning pattern similar to that found in natural titanite that grew at the expense of rutile, visible in element distribution maps as a patchy irregular pattern. Run conditions in the system CaO-Al2O3-TiO2-SiO2-NaCl-H2O(-CaF2) were 600 °C, 0.4 GPa, 1 to 107 days duration. Natural rutile crystals were placed in a perforated Pt-tube within an outer Au-capsule containing wollastonite, γ-Al2O3, optionally powdered CaF2, and a NaCl brine, to simulate conditions, where rutile is transformed into titanite by a hydrous Ca-Si-Al(-F) fluid, driven by a chemical potential gradient between inner and outer capsule. Spontaneous nucleation of titanite is restricted to a small number of crystals on the rutile surface in the inner capsule. Growth proceeds from sparse isolated titanite crystals after 1 day to assemblages of several 100 µm large crystals in a reaction rim in the long-time runs. Titanite is strongly zoned in Al-Ti and shows up to ~0.5 Al per formula unit (pfu) in experiments containing F; without F, substitution is limited to ~0.25 Al pfu. The range of the Ti-Al exchange is already large in short run times and the same heterogeneity is observed in long-time runs. The Al-Ti distribution (with and without F) in compositional domains (up to several tens of micrometers) is patchy and irregular. No relation of the zoning with time (core-rim) or preferred growth directions was observed. In the case of fluid-mediated growth, mineral growth zoning represents a disequilibrium at supersaturated conditions. The concentration of Ti in the fluid is likely the limiting factor for titanite growth considering the low solubility compared to that of Al, Ca, and Si. Titanium is not transported in significant amounts into the outer capsule, indicating low mobility, in contrast to Al, Ca, and Si, which are transported into the inner capsule. Assuming buffered Al concentration from dissolution of the Al-source, we speculate that the Ti/Al of the fluid at the precipitation site was controlled by the local Ti concentration, which varies over the distance from the rutile surface to the growing titanite crystal and produces the irregular patchy zoning. [ABSTRACT FROM AUTHOR]

We performed hydration experiments of pure and Nb-, Cr-, and V-doped synthetic dry (H2O < 3 ppm) single rutile crystals. They were equilibrated with pure H2O in hydrothermal experiments at constant conditions of 600 °C, 400 MPa, and fO2 near the Ni-NiO buffer, run time between ~25 min and 14 days. Slabs cut parallel to (110) of the reacted single crystals (1 to 2 mm³) were analyzed for H+ by FTIR. Hydration occurs almost spontaneously and the H2O-equivalent is uniformly distributed in the samples, but depends extremely on trace element contents. In pure rutile, the average H2O-content is 314 ± 50 ppm, the saturation level at these conditions. Rutile doped with 500 ppm Nb has a lower average H2O content of ~235 ppm, rutile with 2000 ppm Cr has ~900 ppm H2O, and rutile with 2000 ppm V does not incorporate H2O. During stepwise heating at atmospheric pressure of a reacted Nb-doped rutile, H+ is quickly released between 450 and 550 °C. UV-VIS spectra of unreacted colorless and reacted deep blue pure rutile show the rutile-characteristic sharp absorption edge in the UV spectra. The reacted rutile has a broad absorption band at 6500 cm-1 wavenumber attributed to intervalence charge transfer transition Ti3++Ti4+ → Ti4++Ti3+. The reduction of Ti4+ to Ti3+ is charge balanced by the incorporation of H+. The Nb-doped rutile changed its color from light greenish-blue (untreated) to deep blue. In the untreated Nb rutile, the UV-VIS absorption band at 6500 cm-1 indicates that Nb5+ is charge balanced by Ti3+. In the reacted Nb-rutile the absorption band is more intense, but compared with the pure rutile, H+ incorporation is lower by the equivalent of Ti3+ reduced in the untreated rutile. Reacted Cr-rutile almost retains its brownish-orange color, but the spectrum shows a prominent Ti3+/Ti4+ IVCT band at ~6400 cm-1 with moderate intensity considering the high-H2O contents of ~900 ppm. The high-H+ contents are best explained by the reduction of Cr4+ to Cr2+. The UV-VIS spectra of the dark-blue to opaque V-doped rutile show a very strong absorption toward low energies, which is likely caused by reduction of Ti4+ to Ti3+ for charge balance of V5+. This forms a deep narrow window of transmittance in the range 25 000--20 000 cm-1, which causes the dark-blue color. To explore the possible use of H-in-rutile as a geohygrometer, geothermobarometer, and oxybarometer, we measured the H+ content in a natural rutile crystal from a retrograded eclogite with a zoned trace element (Fe, Nb, and Zr) content. The crystal reveals a slight correlation between the variable H2O (~200 to 900 ppm) and its trace element concentrations. The observations indicate that the preservation of H+ contents in this natural rutile is a complicated interplay of diffusive reequlibration of fast H+, slower Fe and very slow other trace elements. An interpretation of the H2O contents of the natural crystal in terms of fO2 or aH2O is not possible. [ABSTRACT FROM AUTHOR]