Search

In this work, sub-microlitre droplets were generated by gravity and electrostatic attraction using a capillary tube. The parameters affecting the sizes and frequency of the droplets were investigated. The volume of droplets could be controlled in the range from 0.7 μL to 2.4 μL and the time interval from 15 s to 60 s with appropriate parameters. Combining the droplets with on-line mass spectrometry (MS) via paper-based electrospray ionization (ESI), a steady flow of solvent was delivered by the capillary tube to the base-side of the paper, which maintained the consistent state of the electrospray. With this approach, each droplet produced a peak in the ion chromatogram. Relative standard deviations (RSDs) not higher than 9% for both the intensities and the time intervals were achieved when using rhodamine 6G and l-phenylalanine as model analytes. The present method was utilized for the monitoring of the amine-aldehyde condensation reaction of butylamine and benzaldehyde. Direct analysis and distribution of molecules in fruits were also performed, which demonstrated the potential application of this approach.

An analysis of the glycan processing event is of particular importance to understand the nontemplate dependent synthetic mechanism of the multiple glycosylation reactions taking place in the Golgi apparatus in connection with the post-translational modification of biomolecules. In our efforts to address the issue, we constructed an analysis platform using nano-liquid chromatography (LC), which also worked as a spray tip, with an optical-fiber-based blue (470 nm) light emitting diode (LED)-induced fluorescence (520 nm) detector coupled with a microelectrospray ionization (ESI)-quadrupole ion trap (QIT)-time of flight (TOF) mass spectrometer (MS). This system was designed to enable both quantitative and qualitative analyses of fluorescently tagged molecules such as BODIPY-tagged lactosylceramide. Owing to the zero dead volume after LC separation, an extremely high sensitivity was achieved for the quantitative analysis (260 amol). It was also shown that a simultaneous online structural analysis based on MS could be achieved for the same quantity of analyte. To further demonstrate its potential, an enzymatic reaction of fluorescently tagged lactosylceramide using sialyltransferase was carried out, and the conversion yield was obtained on the basis of fluorescence detection. In addition, the structural details of a product, sialyl lactosylceramide, were obtained by MS and MS/MS analyses.

The design, performance and application of a novel optical system for high throughput single molecule detection (SMD) configured in a continuous flow format using microfluidics is reported. The system consisted of a microfabricated polymer-based multi-channel fluidic network situated within the optical path of a laser source (lambda(ex) = 660 nm) with photon transduction accomplished using an electron-multiplying charge coupled device (EMCCD) operated in a frame transfer mode that allowed tracking single molecules as they passed through a large field-of-view (FoV) illumination zone. The microfluidic device consisted of 30 microchannels possessing dimensions of 30 microm (width) x 20 microm (depth) with a 25 microm pitch. Individual molecules were electrokinetically driven through the fluidic network and excited within the wide-field illumination area with the resulting fluorescence collected via an objective and imaged onto the EMCCD camera. The detection system demonstrated sufficient sensitivity to detect single DNA molecules labeled with a fluorescent tag (AlexaFluor 660) identified through their characteristic emission wavelength and the burst of photons produced during their transit through the excitation volume. In its present configuration and fluidic architecture, the sample processing throughput was approximately 4.02 x 10(5) molecules s(-1), but could be increased dramatically through the use of narrower channels and a smaller pitch. The system was further evaluated using a single molecule-based fluorescence quenching assay for measuring the population differences between duplexed and single-stranded DNA molecules as a function of temperature for determining the duplex melting temperature, T(m).

Miniaturised liquid/liquid interfaces provide benefits for bioanalytical detection with electrochemical methods. In this work, microporous silicon membranes which can be used for interface miniaturisation were characterized by simulations and experiments. The microporous membranes possessed hexagonal arrays of pores with radii between 10 and 25 microm, a pore depth of 100 microm and pore centre-to-centre separations between 99 and 986 microm. Cyclic voltammetry was used to monitor ion transfer across arrays of micro-interfaces between two immiscible electrolyte solutions (microITIES) formed at these membranes, with the organic phase present as an organogel. The results were compared to computational simulations taking into account mass transport by diffusion and encompassing diffusion to recessed interfaces and overlapped diffusion zones. The simulation and experimental data were both consistent with the situation where the location of the liquid/liquid (l/l) interface was on the aqueous side of the silicon membrane and the pores were filled with the organic phase. While the current for the forward potential scan (transfer of the ion from the aqueous phase to the organic phase) was strongly dependent on the location of the l/l interface, the current peak during the reverse scan (transfer of the ion from the organic phase to the aqueous phase) was influenced by the ratio of the transferring ion's diffusion coefficients in both phases. The diffusion coefficient of the transferring ion in the gelified organic phase was ca. nine times smaller than in the aqueous phase. Asymmetric cyclic voltammogram shapes were caused by the combined effect of non-symmetrical diffusion (spherical and linear) and by the inequality of the diffusion coefficient in both phases. Overlapping diffusion zones were responsible for the observation of current peaks instead of steady-state currents during the forward scan. The characterisation of the diffusion behaviour is an important requirement for application of these silicon membranes in electroanalytical chemistry.

A highly sensitive and quantitative analysis was performed using a poly(dimethylsiloxane) (PDMS) microwell array in a scanning electrochemical microscopy setup. A microelectrode with a relatively large seal radius was used to cover the top of the cylindrical PDMS microwell (96 pL). The voltammogram for 4 mM ferrocyanide resulted in a charge value of 38 nC, suggesting that almost 100% of the reductant in the microwell was converted to the oxidation current. When genetically modified yeast cells were entrapped in the microwell, the accumulation of p-aminophenol (PAP) produced by expressing beta-galactosidase (betaGAL) was successfully observed.

The interactions between Hela cells and silver nanoparticles (AgNPs) have been studied by scanning electrochemical microscopy (SECM) with both IrCl(6)(2-/3-) and Fe(CN)(6)(3-/4-) as the dual mediators. IrCl(6)(2-), which can be produced in situ and react with AgNPs, is used as the mediator between the AgNPs on the cells and the SECM tip. Another redox couple, Fe(CN)(6)(3-/4-), which has a similar hydrophilicity to IrCl(6)(2-/3-), but cannot react with AgNPs, is also employed for the contrast experiments. The cell array is cultured successfully onto a Petri dish by microcontact printing (muCP) technique, which can provide a basic platform for studying of single cells. The approach curve and line scan are the two methods of SECM employed here to study the Hela cells. The former can provide the information about the interaction between Hela cells and AgNPs whereas the later gives the cell imaging. The permeability of cell membranes and morphology are two main factors which have effects on the feedback mode signals when K(3)Fe(CN)(6) is used as the mediator. The permeability of the cell membranes can be ignored after interaction with high concentration of AgNP solution and the height of the Hela cells is slightly decreased in this process. The kinetic rate constants (k(0)) between IrCl(6)(2-) and Ag on the Hela cell can be evaluated using K(3)IrCl(6) as the mediator, and they are increased with the higher concentrations of the AgNP solutions. The k(0) is changed about 10 times from 0.43 +/- 0.04 x 10(-4) to 1.25 +/- 0.07 x 10(-4) and to 3.93 +/- 1.9 x 10(-4) cm s(-1) corresponding to 0, 1 and 5 mM of AgNO(3) solution. The experimental results demonstrate that the AgNPs can be adsorbed on the cell surface and detected by SECM. Thus, the amount of AgNPs adsorbed on cell membranes and the permeability or morphology changes can be investigated simultaneously using this approach. The dual mediator system and cell array fabricated by muCP technique can provide better reproducibility because they can simplify experiments, and provide a platform for further single cell detection.

Carbohydrate microarrays have attracted increasing attention in recent years because of their ability to monitor biologically important protein-carbohydrate interactions in a high-throughput manner. Here we have developed an effective approach to immobilizing intact carbohydrates directly on polystyrene microtiter plates coated with amine-functionalized sol-gel monolayers. Lectin binding was monitored by fluorescence spectroscopy using these covalent arrays of carbohydrates that contained six mono- and di-saccharides on the microplates. In addition, binding affinities of lectin to carbohydrates were also quantitatively analyzed by determining IC(50) values of lectin-specific antibody with these arrays. Our results indicate that microplate-based carbohydrate arrays can be efficiently fabricated by covalent immobilization of intact carbohydrates on sol-gel-coated microplates. The microplate-based carbohydrate arrays can be applied for screening of protein-carbohydrate interactions in a high-throughput manner.

Nitric oxide (NO) is endogenously generated by nitric oxide synthase (NOS) enzymes and is involved in a surprisingly wide range of biological functions. As efforts are made to elucidate the regulatory mechanisms of NOS expression and function, there is increasing interest in following NOS activity directly by monitoring NO production. Additionally, spatial and temporal measurements of NO are important for understanding its function and metabolism. In this work, developments in technology enabling NO detection in biological systems are reviewed. Measuring NO at single cell levels is important as NOS is heterogeneously distributed; however, such measurements are difficult as physiological NO levels are in the low nanomolar to low micromolar range. Here, three categories of analytical techniques enabling NO detection at single cell levels are highlighted: fluorescence microscopy, capillary electrophoresis with laser induced fluorescence detection, and electrochemistry. For each, the basic principles, performance, applications, figures of merits and limitations are presented in terms of single cell NO detection.

Microcantilevers (MCLs) hold a position as a cost-effective and highly sensitive sensor platform for medical diagnostics, environmental analysis and fast throughput analysis. MCLs are unique in that adsorption of analytes on the microcantilever (MCL) surface changes the surface characteristics of the MCL and results in bending of the MCL. Surface stress due to conformation change of proteins and other polymers has been a recent focus of MCL research. Since conformational changes in proteins can be produced through binding of anylates at specific receptor sites, MCLs that respond to conformational change induced surface stress are promising as transducers of chemical information and are ideal for developing microcantilever-based biosensors. The MCL can also potentially be used to investigate conformational change of proteins induced by non-binding events such as post-translational modification and changes in temperature or pH. This review will provide an overview of MCL biosensors based on conformational change of proteins bound to the MCL surface. The models include conformational change of proteins, proteins on membranes, enzymes, DNA and other polymers.

We describe a general strategy for electronic aptamer-based biosensor that is based on target-induced strand release (TISR) of a redox-modified aptamer from the aptamer-capture DNA duplex bound on an electrode.

A dithiobissuccinimidyl propionate (DTSP) self-assembled monolayer (SAM) prepared onto a gold (Au) surface has been utilized for covalent immobilization of cholesterol oxidase (ChOx) and cholesterol esterase (ChEt). These ChOx-ChEt/DTSP/Au bio-electrodes have been characterized using electrochemical impedance and cyclic voltammetric (CV) techniques, respectively. Differential pulse voltammetry (DPV) has been used for enzymatic assay of immobilized ChOx and ChEt onto the DTSP modified gold surface as a function of cholesterol oleate concentration. The response measurement conducted on ChOx-ChEt/DTSP/Au bio-electrode reveal the value of Michaelis-Menten constant (Km) as 0.95 mM suggesting enhanced affinity of enzymes (ChOx and ChEt). The ChOx-ChEt/DTSP/Au bio-electrodes show linearity in range of 50 to 400 mg dl(-1) of cholesterol oleate and the shelf-life of more than 50 days when stored at 4 degrees C. This biosensing electrode shows correlation coefficient of 0.9973 and standard deviation of regression as 0.859 microA.

Dopamine and serotonin are important neurotransmitters that interact in the brain. While dopamine is easily detected with electrochemical sensors, the detection of serotonin is more difficult because reactive species formed after oxidation can adsorb to the electrode, reducing sensitivity. Carbon nanotube treatments of electrodes have been used to increase the sensitivity, promote electron transfer, and reduce fouling. Most methods have focused on nanotube coatings of large electrodes and slower electrochemical techniques that are not conducive to measurements in vivo. In this study, we investigated carbon-fiber microelectrodes modified with single-walled carbon nanotubes for the co-detection of dopamine and serotonin in vivo. Using fast-scan cyclic voltammetry, S/N ratios for the neurotransmitters increased after nanotube coating. Electrocatalytic effects of nanotubes were not apparent at fast scan rates but faster kinetics were observed with slower scanning. Nanotube-modified microelectrodes showed significantly less fouling after exposure to serotonin than bare electrodes. The nanotube-modified electrodes were used to monitor stimulated dopamine and serotonin changes simultaneously in the striatum of anesthetized rat after administration of a serotonin synthetic precursor. These studies show that nanotube-coated microelectrodes can be used with fast scanning techniques and are advantageous for in vivo measurements of neurotransmitters because of their greater sensitivity and resistance to fouling.

Dynamic ligand exchange-affinity capillary electrophoresis (DLE-ACE) is introduced as a convenient platform for assessing the conformational stability and relative affinity of a holoprotein to different ligands without off-line sample pretreatment, since ligand exchange and protein unfolding processes are integrated in-capillary during electromigration.

We report the unambiguous detection of a sequence of Hepatitis C Virus (HCV) at concentrations down to the fractional pM range using Single Wall Carbon Nanotube (SWNT) Field Effect Transistor (FET) devices functionalized with Peptide Nucleic Acid (PNA).

Infrared microspectroscopic imaging data of single human prostate cancer cells, on an artificial extracellular matrix (Matrigel) thin-film surface, are presented. The spectral intensity maps, obtained in reflection mode, appear to show that the protein intensity distribution observed at the location of a cell changes dramatically depending on the concentration and/or thickness of the underlying Matrigel layer. Specifically, cells adhered to a low protein concentration or thin surface exhibit a higher protein intensity signal than the surrounding layer whereas those on a high protein concentration or thick surface exhibit a lower protein intensity signal. These results are qualitatively explained by a simple model that takes into account the fact that radiation scattered from cells can enter the collection optics of the microscope without passing through the Matrigel layer. This leads to an apparent reduction in absorption at the cell.

In this study, we have demonstrated in situ, all-electrical detection of Bacillus anthracis (BA) spores using lead magnesium niobate-lead titanate/tin (PMN-PT/Sn) piezoelectric microcantilever sensors (PEMS) fabricated from PMN-PT freestanding films and electrically insulated with methyltrimethoxysilane (MTMS) coatings on the tin surface. Antibody specific to BA spore surface antigen was immobilized on the platinum electrode of the PMN-PT layer. In phosphate-buffered saline (PBS) solution, the PMN-PT/Sn PEMS exhibited quality (Q) values ranging from 50 to 75. The detection was carried out in a closed-loop flow cell with a liquid volume of 0.8 ml and a flow rate of 1 ml min(-1). It was shown that one sensor, "PEMS-A" (500 microm long, 800 microm wide, with a 22 microm thick PMN-PT layer, a 20 microm thick tin layer and a 1 +/- 0.5 x 10(-12) g Hz(-1) mass detection sensitivity) exhibited resonance frequency shifts of 2100 +/- 200, 1100 +/- 100 and 700 +/- 100 Hz at concentrations of 20,000, 2000, and 200 spores ml(-1) or 16,000, 1600, and 160 total spores, respectively. Additionally, "PEMS-B" (350 microm long, 800 microm wide, with an 8 microm thick PMN-PT layer, a 6 microm thick tin layer and a 2 +/- 1 x 10(-13) g Hz(-1) mass detection sensitivity) exhibited resonance frequency shifts of 2400 +/- 200, 1500 +/- 200, 500 +/- 150 and 200 +/- 100 Hz at concentrations of 20,000, 2000, 100, and 45 spores ml(-1) or 16,000, 1600, 80, and 36 total spores, respectively.

Electrochemical DNA biosensors exploit the affinity of single-stranded DNA for complementary strands of DNA and are used in the detection of specific sequences of DNA with a view towards developing portable analytical devices. Great progress has been made in this field but there are still numerous challenges to overcome. This review for researchers new to the field describes the components of electrochemical DNA biosensors and the important issues in their design. Methods of transducing DNA binding events are discussed along with future directions for DNA biosensors.

Surface plasmon resonance (SPR) spectroscopy is an efficient probe of transient structural changes in molecular films. To analyze kinetic SPR data for such systems, generally it is necessary to adapt an adequate theoretical framework that would allow one to express the measured optical quantities (time-dependent shifts of the resonance angle or wavelength) in terms of the structural parameters (layer thickness, mass density, or surface coverage) of the sample molecules. We present here theoretical calculations and illustrative experimental results to address certain essential elements of this type of data analysis for transient SPR systems. The phenomenological framework we consider here is based on multilayer reflectivity calculations, and can be applied to a broad class of systems involving ordered molecular layers on supporting gold films. A typical application of these calculations is demonstrated through the analysis of specific SPR experiments designed to probe the kinetics of pH-induced structural changes in a molecular film of 11-mercaptoundecanoic acid (MUA) on a thin gold film.

Multiple optical sensors for chemical species are sensitive, non-toxic and non-invasive and enable spatially and temporally resolved multianalyte detection. Recent advances are highlighted with a focus on fluorescence-based methods and the biologically and clinically important analytes oxygen, pH, carbon dioxide and temperature. Indicator chemistries such as permeation-selective microbeads and nanoparticles allow the production of microscopically homogeneous sensor layers. The use of combinations of spectral discrimations along with time-resolved monitoring schemes based on luminescence lifetime or intensity-lifetime ratios enables all-optical real-time multianalyte determination.

Images of Human umbilical vein endothelial cells (HUVECs) have been obtained and the regulation of cell morphology changes after nitric oxide release has been recorded and discerned quantitatively for the first time using scanning electrochemical microscopy.

Eight vegetative bacterial strains and two spores were characterized by pyrolysis-gas chromatography with differential mobility spectrometry (py-GC/DMS) yielding topographic plots of ion intensity, retention time, and compensation voltage simultaneously for ions in positive and negative polarity. Biomarkers were found in the pyrolysate at characteristic retention times and compensation voltages and were confirmed by standard addition with GC/MS analyses providing discrimination between Gram negative and Gram positive bacterial types, but no recognition of individual strains within the Gram negative bacteria. Principal component analysis was applied using two dimensional data sets of ion intensity versus retention time at five compensation voltages including the reactant ion peaks all in positive and negative ion polarity. Clustering was observed with compensation voltage (CV) chromatograms associated with ion separation in the DMS detector and little or no clustering was observed with the reactant ion peaks or CV chromatograms where ion separation is poor. Consistent clustering of Gram positive B. odysseyi and Gram negative E. coli in both positive and negative polarities with the reactant ion peak chromatograms and key CV chromatograms suggests common but unknown common chemical compositions in the pyrolysate.

A quantitative analysis of the oxygen concentration profile near a poly(dimethylsiloxane) (PDMS) microfluidic device was performed using scanning electrochemical microscopy (SECM). A microchannel filled with sodium sulfite (Na(2)SO(3)) aqueous solution was imaged by SECM, showing that the oxygen diffusion layer of the PDMS microchannel was observed to be hemicylindrical. Based on a theoretical analysis of the hemicylindrical diffusion layer of the microchannel, the total oxygen mass transfer rates of oxygen to the PDMS microchannel filled with the Na(2)SO(3) solution was calculated to be (4.01 +/- 0.30) x 10(-12) mol s(-1). This is the maximum value of the oxygen transfer rate for this PDMS microchannel device. The oxygen consumption rate increased almost linearly with the logarithm of the concentration of E. coli cells (10(6) approximately 10(8) cells). The respiratory activity for a single E. coli cell was estimated to be approximately 4.31 x 10(-20) mol s(-1) cell(-1).

A novel approach to real-time monitoring of protein immobilization resulted in the surprising finding that current immobilization protocols are far from optimized.

Selective capture of target biomolecules by ligands immobilized on a solid support is a cornerstone of two seemingly unrelated techniques: micro-Affinity Chromatography (microAC) and micro-Bead Injection Spectroscopy (microBIS). This work shows, for the first time, how these techniques can be carried out using the same instrument and how the data obtained this way complement each other, yielding complete information on retention and elution of target biomolecules. Biomolecular association and dissociation were investigated by microAC and microBIS, using computer-controlled programmable flow and the same instrument for automated bead transport, packing of a micro-column, assay of the analyte, and bead disposal. The absorbance of the analyte was monitored within the fiber optic flow cell configured either for monitoring directly on the beads or post-column after elution. The separation, binding, and elution of immunoglobulins (human IgG, rabbit IgG, and horse IgG) on protein G-coated Sepharose beads were studied as model systems. The limit of detection of the microAC technique was determined to be 5 ng microL(-1) IgG, and that of the microBIS technique was 50 ng microL(-1) IgG.

Long molecules such as fibrous proteins are particularly difficult to characterise structurally. We have recently designed a microvolume Couette flow linear dichroism (LD) cell whose sample volume is only 20-40 microL in contrast to previous cells where the volume of sample required has typically been of the order of 1000-2000 microL. This brings the sample requirements of LD to a level where it can be used for biological samples. Since LD is the difference in absorption of light polarised parallel to an orientation direction and perpendicular to that direction, it is the ideal technique for determining relative orientations of subunits of e.g. fibrous proteins, DNA-drug systems, etc. For solution phase samples, Couette flow orientation, whereby the sample is sandwiched between two cylinders, one of which rotates, has proved to be the optimal technique for LD experiments in many laboratories. Our capillary microvolume LD cell has been designed using extruded quartz rods and capillaries and focusing and collecting lenses. We have developed applications with PCR products, fibrous proteins, liposome-bound membrane proteins, as well as DNA-dye systems. Despite this range of applications, to date there is nothing reported in the literature to enable one to validate the performance of Couette flow LD cells. In this paper we establish validation criteria and show that the data from the microvolume cells are reproducible, vary by less than 1% with sample reloading, follow the Beer-Lambert law, and have signals linear in voltage over a wide voltage range. The microvolume cell data are consistent with those from the large-volume cells for DNA samples. Surprisingly, upon extending the wavelength range by adding the intercalator ethidium bromide, the spectra in the microvolume and large-volume cells differ by a wavelength dependent orientation parameter. This wavelength variation was concluded to be the result of Taylor-vortices in the large-volume cells which have inner rotating cylinders in our laboratory. Thus the microvolume LD cells can be concluded to provide better data than our large-volume LD cells, though the latter are still to be preferred for titration series as it is extremely difficult to add sample to the capillary cells without introducing artefacts.

Microbial contamination is not only a medical problem, but also plays a large role in pharmaceutical clean room production and food processing technology. Therefore many techniques were developed to achieve differentiation and identification of microorganisms. Among these methods vibrational spectroscopic techniques (IR, Raman and SERS) are useful tools because of their rapidity and sensitivity. Recently we have shown that micro-Raman spectroscopy in combination with a support vector machine is an extremely capable approach for a fast and reliable, non-destructive online identification of single bacteria belonging to different genera. In order to simulate different environmental conditions we analyzed in this contribution different Staphylococcus strains with varying cultivation conditions in order to evaluate our method with a reliable dataset. First, micro-Raman spectra of the bulk material and single bacterial cells that were grown under the same conditions were recorded and used separately for a distinct chemotaxonomic classification of the strains. Furthermore Raman spectra were recorded from single bacterial cells that were cultured under various conditions to study the influence of cultivation on the discrimination ability. This dataset was analyzed both with a hierarchical cluster analysis (HCA) and a support vector machine (SVM).

Quartz crystal microbalance/heat conduction calorimetry (QCM/HCC) is a new measurement technology that has been used to monitor simultaneously the mass and motional resistance of a thin film in conjunction with the heat flow produced by a chemical change in the film initiated by reaction with a gas. In this work we examine the applicability of the QCM/HCC in detecting chemical changes at the solution/thin film interface. Human serum albumin (HSA) was bound to the gold electrode of a 5 MHz AT-cut quartz resonator using three types of linkers and then exposed to buffered solutions of the anticoagulant drug warfarin. Changes in resonator frequency and motional resistance as well as changes in heat flow produced by warfarin binding to HSA were monitored as a function of the warfarin concentration. Differences in frequency and motional resistance changes depend upon the linker and vary both in magnitude and sign, whereas the integrated heat signal is proportional to the concentration of warfarin and independent of the linker chemistry. Quartz crystal microbalance/heat conduction calorimetry can thus be a useful tool for studying protein-ligand interactions at the solution-surface interface, even though the quartz resonator does not behave as a microbalance.

A SPME-HPLC-post-column fluorescent derivatization method for the direct determination of saxitoxin (STX), the most potent paralytic shellfish poisoning (PSP) toxin, in water has been developed. Commercially available SPME devices with 50 microm Carbowax templated resin (CW/TPR) coating was found to be able to pre-concentrate STX from aqueous media. A special pre-conditioning treatment of soaking the SPME coating in 0.1 M NaOH solution significantly improved the extraction efficiency. The optimal pH for the SPME process is 8.1 and the equilibration time is 40 min. The partition coefficient, K, of the distribution of STX between the SPME coating and the aqueous media was measured to be 2.99 +/- 0.04 x 10(3). Extracted toxin on the SPME stationary phase was difficult to be desorbed by the HPLC mobile phase under dynamic desorption mode. A static ion-pairing desorption technique using a desorption solvent mixture of 20 mM sodium 1-heptanesulfonate in 30% aqueous acetonitrile acidified with 50 mM sulfuric acid was developed to overcome this problem. The method detection limit and repeatability achieved by this SPME-HPLC method were 0.11 ng ml(-1) and 3.7%, respectively, with a sample volume of just 5 ml of water. This analytical method is adequate for the monitoring of the PSP toxin in fresh/drinking waters. However, serious interference was observed when this technique was applied to saline water samples. This is probably due to competition of sodium ions with the cationic STX for absorption into the SPME stationary phase.

Quartz crystal resonator (QCR) sensors are commonly known as mass sensitive devices, usually called QCM (Quartz Crystal Microbalance). This constricted view should not be applied to biosensor applications. In many cases the sensor response is strongly influenced or even governed by non-gravimetric effects; the QCR sensor does not act as a microbalance. For better understanding of the sensor response as well as for sensor optimization a more general description of the sensor principle is required. The Transmission Line Model (TLM) is a powerful tool to describe the transduction scheme of QCR and other acoustic-wave based sensors. It is therefore applied to the analysis of the sensor behavior under several conditions, which can be expected in biochemical experiments. The generalization of acoustic parameters provides a concept to overcome some of the limiting assumptions of the present TLM.

The promises of obtaining meaningful measurements on physical systems loading the quartz crystal microbalance are extremely bright. The two aspects of this process, namely the gathering of faithful data and reductions of these data by way of modelling, need careful consideration to avoid some very common missteps which could frustrate this effort. The experimental techniques are emphasized here but a brief introduction to the basic methodologies of modelling is also given.

A novel boron-doped diamond (BDD) microelectrode array is characterised with electrochemical and atomic force microscopic techniques. The array consists of 40 micron-diameter sized BDD discs which are separated by 250 microns from their nearest neighbour in a hexagonal arrangement. The conducting discs can be electroplated to produce arrays of copper, silver or gold for analytical purposes in addition to operating as an array of BDD-microelectrodes. Proof-of-concept is shown for four separate examples; a gold plated array for arsenic detection, a copper plated array for nitrate analysis, a silver plated array for hydrogen peroxide monitoring and last, cathodic stripping voltammetry for lead at the bare BDD-array.

The present work displays capillary liquid chromatographic column switching methodology tailored for determination of benzo[a]pyrene tetrol isomers in biological matrices using on-line fluorescence and micro-electrospray ionization mass spectrometric detection. A well-established off-line crude solid phase extraction procedure was used in order to make the method compatible with several biological matrices. The solid phase extraction eluates were evaporated to dryness, redissolved in 1.0 ml methanol:water (10:90, v/v), loaded onto a 0.32 mm I.D. x 40 mm 5 microm Kromasil C(18) pre-column for analyte enrichment and back-flushed elution onto a 0.30 mm I.D. x 150 mm 3.5 microm Kromasil C(18) analytical column. The samples were loaded with a flow rate of 50 microl min(-1) and the tetrols were separated at a flow rate of 4 microl min(-1) with an acetonitrile:10 mM ammonium acetate gradient from 10 to 90%. A sample loading flow rate up to 50 microl min(-1) was allowed. The fluorescence excitation and emission were set to 342 and 385 nm, respectively, while mass spectrometric detection of the benzo[a]pyrene tetrols was obtained by monitoring their [M - H](-) molecular ions at m/z 319. The method was validated over the concentration range 0.1-50 ng ml(-1) benzo[a]pyrene tetrols in a cell culture medium with 100 microl injection volume, fluorescence detection and the first eluting tetrol isomer as model compound, resulting in a correlation coefficient of 0.993. The within-assay (n= 6) and between-assay (n= 6) precisions were determined to 2.6-8.6% and 3.8-9.6%, respectively, and the recoveries were determined to 97.9-102.4% within the investigated concentration range. The mass limit of detection (by fluorescence) was 3 pg for all the tetrol isomers, corresponding to a concentration limit of detection of 30 pg ml(-1) cell culture medium. The corresponding mass spectrometric mass limits of detection were 4-10 pg, corresponding to concentration limits of detection of 40-100 pg ml(-1) cell culture medium.

During the last few years there has been a rapid increase in the use of electrochemical reactions in lab-on-a-chip devices. This development, which has so far mainly focussed on electrochemical detection in chip-based capillary electrophoresis, can be explained by the fact that electrochemical techniques and devices are particularly well-suited for inclusion in lab-on-a-chip systems. The most important reason for this is that the required electrodes can readily be manufactured and miniaturised without loss of analytical performance using conventional microfabrication methods. In this Research Highlight article, the developments during the last three years concerning electrochemical techniques for lab on-a-chip applications are discussed, with particular focus on emerging electrochemical methods for sample clean-up and preconcentration, electrochemical derivatisation and electrochemical detection in chip-based capillary electrophoresis.

An automatically renewable microcolumn, subjected to operation by programmable flow, is presented and for the first time used for separation and quantification of biomolecules on Sepharose Protein A beads, with absorbance measurement at 280 nm and a detection limit of 6 ng mouse IgG microL(-1).

The focus of this paper is on the fabrication of a PDMS-based passive efficient micromixer to be easily integrated into the other on-chip microfluidic system. The mixing is achieved by "strong stretching and folding," which employs a three-dimensional microchannel structure. By the simultaneously vertical and transversal dispersion of fluids, strong advection is developed. Owing to this powerful mixing performance (more than 70% of the mixing is accomplished within 2.3 mm over a wide range of Reynold number (Re)), the smaller integrative mixer can be realized. The feasibility and the potential usefulness of an integrative micromixer were evaluated by incorporating two mixers into the microchannel for the spectroscopic detection of a glucose-catalyst reaction. The results demonstrate a promising performance for diverse applications in the assay or synthesis of biological or chemical materials.

The use of DNA to template the assembly of nanoscale wires and protein-functionalized nanogap contacts is described: Specifically, the use of DNA to template the assembly of gold nanowires between conventionally patterned gold contacts on a silicon wafer substrate. Also described is the use of DNA to template the assembly of protein-functionalized nanogap gold contacts on a silicon wafer substrate. Of particular significance is the finding that suitably modified gold nanoparticles recognize and bind selectively the protein-functionalized nanogap and are localized there.

The control of protein immobilisation and orientation at surfaces is of increasing relevance in biotechnological devices. These devices include reproducible biosensors, biofuel cells, and protein arrays, all of which require the immobilisation of protein/enzymatic sensing elements with retention of their activity. The control of protein orientation upon immobilisation is of importance in (1) facilitating equal access of analyte molecules to the protein that acts as a sensing element and (2) creating favourable interactions to stabilise the protein on the surface for long-term storage and usage of bio-devices. This review presents a comparison of a number of surface analysis techniques that have been widely used in the chemical analysis of surfaces that offer the potential to discriminate different orientations of the same protein on a conductive surface.

This review deals with the topic of ultrasmall electrodes, namely nanoelectrodes, arrays of these and discusses possible applications, including to analytical science. It deals exclusively with the use of nanoelectrodes in an electrochemical context. Benefits that accrue from use of very small working electrodes within electrochemical cells are discussed, followed by a review of methods for the preparation of such electrodes. Individual nanoelectrodes and arrays or ensembles of these are addressed, as are nanopore systems which seek to emulate biological transmembrane ion transport processes. Applications within physical electrochemistry, imaging science and analytical science are summarised.

The applicability of an etched and silver or gold coated SERS fiber probe in combination with a commercially available laboratory micro-Raman setup or a home built mobile micro-Raman setup to perform on-site field measurements was evaluated and successfully tested on different biological samples. The SERS fiber probe allows one to perform measurements with high spatial resolution. Simultaneously, the laser power used for Raman spectroscopy on biological samples as compared with conventional Raman experiments can be reduced by more than two orders of magnitude. This experimental arrangement was tested to investigate sensitive biological samples like mint plants (Bergamot mint, spear mint) and citrus fruits (kumquat). Furthermore, traces of fungicides on wine leaves were detected by means of such a SERS fiber probe setup.

A prototype amperometric immunosensor was evaluated based on the adsorption of antibodies onto perpendicularly oriented assemblies of single wall carbon nanotubes called SWNT forests. The forests were self-assembled from oxidatively shortened SWNTs onto Nafion/iron oxide coated pyrolytic graphite electrodes. The nanotube forests were characterized using atomic force microscopy and resonance Raman spectroscopy. Anti-biotin antibody strongly adsorbed to the SWNT forests. In the presence of a soluble mediator, the detection limit for horseradish peroxidase (HRP) labeled biotin was 2.5 pmol ml(-1) (2.5 nM). Unlabelled biotin was detected in a competitive approach with a detection limit of 16 nmol ml(-1) (16 microM) and a relative standard deviation of 12%. The immunosensor showed low non-specific adsorption of biotin-HRP (approx. 0.1%) when blocked with bovine serum albumin. This immunosensing approach using high surface area, patternable, conductive SWNT assemblies may eventually prove useful for nano-biosensing arrays.

The miniaturization of laboratory processes offers substantial advantages over traditional techniques in terms of cost, speed, and potential for multistage automation. To date, only a few studies have reported successful microfluidics-based immunoassays, most of which rely on fluorescence detection technologies. The goal of this study was to develop a poly(dimethylsiloxane) microfluidics-based immunoassay methodology and a versatile colorimetric quantification scheme for the detection of visual colour changes resulting from immune reactions in microchannels. The novel immunoassay technique was applied towards the detection of Helicobacter pylori infection using 20 human serum samples of known infection status, and results compared with conventional nitrocellulose membrane-based dot-ELISA. The microchannel immunoassay reliably detected H. pylori antigens in quantities on the order of 10 ng, which provides a sensitivity of detection comparable to conventional dot-blot assays. Sensitivity was 100%, specificity was 90%, positive predictive value 91%, and negative predictive value 100%, with an overall accuracy of 95%. The software developed generated results that were consistent with visual observations and by automatically taking into account background intensity changes, the software minimized subjectivity. Volumes of solutions used were 100-fold less compared with conventional immunoassays. Miniaturization of the ELISA using this technique provides a means for the accurate diagnosis of microbial infection while minimizing waste production., (Copyright 2004 The Royal Society of Chemistry)

A newly designed capillary electrophoresis (CE) microchip with a simple and efficient sample introduction interface is described. The sample introduction is carried out directly on the separation channel through a sharp inlet tip placed in the sample vial, without an injection cross, complex microchannel layouts or hardware modification. Alternate placement of the inlet tip in vials containing the sample and buffer solutions permits a volume defined electrokinetic sample introduction. Such fast and simple sample introduction leads to highly reproducible signals with no observable carry over between different analyte concentrations. The performance of the system was demonstrated in flow-injection and CE measurements of nitroaromatic explosives and for on-chip enzymatic assays of glucose in the presence of ascorbic acid. Employing an 8 cm long separation channel and a separation voltage of 4000 V it offers high-throughput flow-injection assays of 100 samples h(-1) with a relative standard deviation of 3.7% for TNT (n= 100). Factors influencing the analytical performance of the new microchip have been characterized and optimized. Such ability to continuously introduce discrete samples into micrometer channels indicates great promise for high-speed microchip analysis.

This review discusses recent advances in the science and technology of Coulter counting. The Coulter counting principle has been used to determine the size, concentration, and in favorable cases the surface charge, of nanometer-scale colloidal particles, viruses, DNA and other polymers, and metal ions. A resurgence of interest in the field of COulter counting is occurring because of the advent of new technologies that permit fabrication of membranes containing single, robust, and chemically well-defined channels having smaller and more uniform sizes than could be prepared in the past. These channels are prepared from biological materials, such as self-assembling membrane proteins, and from synthetic materials such as polymers, carbon nanotubes, and silicon-based inorganic materials. In addition to particle characterization, there have been a few recent examples of using Coulter counters to study chemical processes, such as the dehybridization of DNA.

The metabolic activity of E. coli cells embedded in collagen gel microstructures in a cone-shaped well and in a cylindrical micropore was investigated using scanning electrochemical microscopy (SECM), based on the oxygen consumption rate and the conversion rate from ferrocyanide to ferricyanide. The analysis of the concentration profiles for oxygen and ferrocyanide afforded the oxygen consumption rate and the ferrocyanide production rate. A comparison indicated that the ferrocyanide production rates were larger than the oxygen consumption rate, and also that the rates observed in the cylindrical micropore were larger than those observed in the cone-shaped well. The ferrocyanide production rate of a single E. coli cell was calculated to be (5.4 +/- 2.6) x 10(-19) mol s(-1), using a cylindrical micropore system.

An automated LPME device for a dynamic LPME method was manufactured and its extraction efficiency was tested using spiked urine samples. The developed home-made LPME device was a programmable automated syringe dispenser to overcome deteriorating precision and difficulties in manually manipulating the plunger repeatedly. To establish the optimum parameters for benzene ethylamines, the effects of sampling volume, solvent volume, pH, salt-effect, choice of solvents, plunger speed, and number of samplings were investigated. Good repeatabilities for the extraction of mephentermine, ephedrine, methoxyphenamine, selegiline, and bupropion were obtained and the RSD values were 2.4, 1.9, 1.3, 1.6 and 1.5% at a concentration of 3 microg mL(-1) in spiked urine samples, respectively. The limit of detection was below 0.05 microg mL(-1) for the investigated drugs. This developed device for LPME analysis gave good validation results and improved convenience.

Isocyanates can cause occupational asthma. By using available HPLC-UVF methods, isocyanates can be quantified only at levels above 1% of the Permissible Exposure Limits (PEL). Once sensitized, workers can react to concentrations below these limits of detection (LOD) making these methods insufficiently sensitive to adequately evaluate trace amounts of isocyanates present in air or in materials at safe levels for sensitized workers. This article describes a novel method for isocyanate analysis allowing the quantification of 2,4TDI and 2,6TDI monomers at very low concentrations using HPLC-CIS-MS-MS. The method's sensitivity increases with a decrease in the alkali radius. The LOD is 0.039 ng mL(-1) for 2,4TDI and 0.100 ng mL(-1) for 2,6TDI in solution when lithium is the alkali adduct, which is 20 times more sensitive than HPLC-UVF method. This new method allows determination in foam at levels of 0.078 ng g(-1) for 2,4TDI and 0.200 ng g(-1) for 2,6TDI respectively, for a 0.5 g foam sample. This is more than 100 times more sensitive than other methods for determining free monomers in solid materials. Analytical reproducibility and precision are better than 92% and 93% for both diisocyanate monomers. The use of HPLC-UVF conventional method failed to detect unreacted isocyanates in foam samples, but TDI monomers were quantified by HPLC-CIS-MS-MS.

The first nanometer scale anion sensing fluorescent spherical nanosensors, or PEBBLEs (probes encapsulated by biologically localized embedding) have been developed for the intracellular monitoring of chloride. The general scheme for the polymerization and introduction of sensing components creates a matrix that allows for the utilization of the highly selective ionophores used in poly(vinyl chloride) and poly(decyl methacrylate) ion-selective electrodes. We have demonstrated that our previously developed scheme for cation sensors can be utilized to tailoring selective submicron sensors for use in intracellular measurements of biologically relevant anions for which selective enough fluorescent probes do not exist. Three schemes were attempted for the development of chloride sensitive PEBBLEs. The first two used the Chloride ionophore indium(III) octaethylporphyrin chloride (In(OEP)Cl) (1) as an ionophore working in tandem with a chromoionophore and (2) as a chromoionophore with a peak shift generated by chloride mediated breaking of hydroxide ion-bridged porphyrin dimer. The third method used the optically silent Chloride ionophore III (ETH 9033) working in tandem with chromoionophore III (ETH 5350) to indirectly monitor Cl- activity by reporting the H+ coextracted into the matrix. Method 3 gave the most promising results, at a pH of 7.2 these PEBBLEs have a limit of detection of 0.2 mM Cl- with a linear dynamic range of 0.4 mM-190 mM Cl-. These PEBBLEs were delivered into C6 glioma cells, utilizing a gene gun, and intracellular chloride levels were monitored during ion-channel stimulation by kainic acid.

Fe3O4 nanoparticles cast on pyrolytic graphite (PG) electrodes were used to immobilize hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP). The Fe3O4 nanoparticles provided a favorable microenvironment for the proteins to directly transfer electrons with electrodes. The protein-Fe3O4 films were used to electrochemically catalyze the reduction of oxygen, trichloroacetic acid, nitrite and hydrogen peroxide, and showed a potential applicability in fabricating biosensors. Transmission electron microscopy (TEM), UV-visible absorption and reflectance absorption infrared (RAIR) spectroscopy, and cyclic and square wave voltammetry, were used to characterize the films.

Solvent and pH effects on fast and ultrasensitive 1,1'-oxalyldi(4-methyl)imidazole chemiluminescence (OD4MI-CL) were studied. The influences of these two factors on the complex OD4MI-CL reaction are discussed within a conceptual prototype for developing aqueous and non-aqueous capillary electrophoresis (ACE and NACE) devices with OD4MI-CL detection. The reaction channel length and OD4MI yield from the reaction between bis(2,4,6-trichlorophenyl) oxalate (TCPO) and 4-methylimidazole in the channel will be influenced by pH, water volume fraction, and cosolvent properties of the solution. Optimum OD4MI-CL efficiency is observed at pH 6.5 when 1-propanol, which has a low dielectric constant (epsilon = 20.8), is used as the NACE solvent in the separation channel. Water (epsilon = 80.1), the solvent in the ACE separation channel, acts similarly to a high dielectric constant organic solvent in NACE because the disadvantages normally associated with TCPO-CL reactions in water disappear due to the faster OD4MI-CL reaction versus OD4MI decomposition in aqueous solution. Therefore, it is expected that the OD4MI-CL detection system can be used in both NACE and ACE devices without requiring detector modifications. We also conclude that OD4MI-CL detection in NACE and ACE devices will be much more sensitive than the TCPO-CL detection used in current NACE devices.

Automated sampling and fluorogenic derivatization of islet proteins (insulin, proinsulin, c-peptide) are separated and analyzed by a novel lab-on-valve capillary electrophoresis (LOV-CE) system. This fully integrated device is based on a micro sequential injection instrument that uses a lab-on-valve manifold to integrate capillary electrophoresis. The lab-on-valve manifold is used to perform all microfluidic tasks such as sampling, fluorogenic labeling, and CE capillary rejuvenation providing a very reliable system for reproducible CE separations. Fluorescence detection was coupled to an epiluminescence fluorescence microscope using a customized capillary positioning plate. This customized plate incorporated two fused-silica fiber optic probes that allow for simultaneous absorbance and fluorescence detection, extending the utility of this device. Derivatization conditions with respect to the sequence of addition, timing, injection position, and volumes were optimized through iterative series of experiments that are executed automatically by software control. Reproducibility in fluorogenic labeling was tested with repetitive injections of 3.45 mM insulin, yielding 1.3% RSD for peak area, 0.5% RSD for electromigration time, and 2.8% RSD for peak height. Fluorescence detection demonstrated a linear dynamic range of 3.43 to 6.87 microM for insulin (r2 = 0.99999), 0.39 to 1.96 pM for proinsulin (r2 = 0.99195) and 260 to 781 nM for c-peptide (r2 = 0.99983). By including hydrodynamic flushing immediately after the detection of the last analyte, the sampling frequency for islet protein analysis was increased. Finally, an in vitro insulin assay using rat pancreatic islet excretions was tested using this lab-on-valve capillary electrophoresis system.