Search

As molecular diagnostics move away from polymerase chain reaction (PCR) in order to target point-of-care testing applications, loop-mediated isothermal amplification (LAMP) is gaining popularity due its rapid, sensitive and specific detection with simpler instrumentation. However, while Taqman PCR enables real-time quantitative readout and multiplexed gene detection in single samples, analogous methods in LAMP are not yet broadly developed. To date, the real-time detection methods applied to LAMP involve turbidimetry or measuring fluorescence of an intercalator; however, both of these methods are nonspecific to the target of interest and do not allow for multiple gene detection in a single sample. Probe-based methods have been developed to address the need for specific target detection and multiplexed, one-pot reactions, but most of these methods have strict assay conditions and require the design of loop primers, which is not always possible. DARQ LAMP is a probe-based method that offers the most promise for quantitative and real-time multiplexed detection, as it has a relatively simple design and can be used in either a four-primer or six-primer system. However, previous work has only shown the assay to function well in a narrow range of reaction conditions, which is restrictive given that various LAMP assays require a broad range of conditions. In this work we investigate the use of the newest-generation strand-displacing polymerase and demonstrate that it has higher tolerance to reaction conditions than previous polymerases. Using the results from these studies, we demonstrate a single-reaction triplex assay for the detection of methicillin-resistant S. aureus (MRSA), which would not be possible with any of the previously reported LAMP systems. [ABSTRACT FROM AUTHOR]

It is well-established that redox-reactions are integral to biology for energy harvesting (oxidative phosphorylation), immune defense (oxidative burst) and drug metabolism (phase I reactions), yet there is emerging evidence that redox may play broader roles in biology (e.g., redox signaling). A critical challenge is the need for tools that can probe biologically-relevant redox interactions simply, rapidly and without the need for a comprehensive suite of analytical methods. We propose that electrochemistry may provide such a tool. In this tutorial review, we describe recent studies with a redox-capacitor film that can serve as a bio-electrode interface that can accept, store and donate electrons from mediators commonly used in electrochemistry and also in biology. Specifically, we (i) describe the fabrication of this redox-capacitor from catechols and the polysaccharide chitosan, (ii) discuss the mechanistic basis for electron exchange, (iii) illustrate the properties of this redox-capacitor and its capabilities for promoting redox-communication between biology and electrodes, and (iv) suggest the potential for enlisting signal processing strategies to “extract” redox information. We believe these initial studies indicate broad possibilities for enlisting electrochemistry and signal processing to acquire “systems level” redox information from biology. [ABSTRACT FROM AUTHOR]

In principle, surface enhanced Raman spectroscopy (SERS) is thought to provide unique identification of a target analyte, even in complex samples or in the presence of multiple analytes. In practice, however, this is not always true for real-world samples due to various forms of interference. In this report, we build upon our previous work on inkjet-printed SERS substrates by using paper and polymer membranes to integrate sample cleanup and analyte separation with SERS detection. Inkjet-printed paper SERS substrates provide a highly sensitive chemical detection platform of unprecedented cost and simplicity. In addition, paper inherently provides unique capabilities, such as capillary-actuated fluid transport and selective molecular retention. Utilizing these properties, we demonstrate two-dimensional chromatographic separation and SERS detection on inkjet-printed paper SERS substrates. Then, we leverage the separation properties of paper and polymer membranes for real applications that feature complex sample matrices, including the detection of down to 5 ppm melamine in infant formula, as well as the quantification of nanograms of heroin in samples contaminated with a highly fluorescent background. The results presented here demonstrate that inkjet-printed paper SERS devices not only provide advantages in terms of sensitivity and cost, but the paper provides inherently integrated sample cleanup capabilities that are not available in traditional SERS substrates and microfluidic SERS devices. These unique capabilities of paper SERS devices enable the identification of targeted analytes even in complex real-world samples. [ABSTRACT FROM AUTHOR]

We demonstrate a paper-based surface swab and lateral-flow dipstick that includes an inkjet-printed surface-enhanced Raman spectroscopy (SERS) substrate for analyte detection. Due to capillary-action wicking of cellulose, the paper dipstick enables extremely simple and pump-free loading of liquid samples into the detection device, and in addition provides inherent analyte concentration within the detection volume. Furthermore, the flexible nature of the paper-based SERS device also enables it to act as a swab to collect analyte molecules directly from a large-area surface; the collected analyte molecules can then be focused into a small-volume SERS-active region by lateral-flow concentration. These capabilities are unseen in today's SERS substrates and microfluidic SERS devices. Using these novel lateral-flow paper SERS devices, we achieved detection limits as low as 95 fg of Rhodamine 6G (R6G), 413 pg of the organophosphate malathion, 9 ng of heroin, and 15 ng of cocaine. Moreover, the measurements show that the technique is quantitative and is repeatable across multiple swabs and dipsticks. The results reported here may lead to ultra-low-cost portable applications in trace chemical detection. [ABSTRACT FROM AUTHOR]

In this work, an optofluidic SERS device optimized for on-site analytics in the field is utilized for the multiplexed detection of three fungicides that are highly regulated in aquaculture. The optofluidic SERS microsystem does not require a bulky pump for sample loading, which significantly improves its portability; the sample is simply loaded into the device by applying negative pressure using a pipette. Moreover, integrated fiber optic cables automate sample excitation and signal collection without the need for alignment on a traditional Raman microscope. The detection zone of the device consists of a porous matrix of packed silica microspheres that accumulates silver nanoparticles and adsorbed analyte molecules. This passive concentration matrix has been shown to boost the SERS signal by up to four orders of magnitude as compared to SERS in an open microfluidic channel. We were able to detect as low as 5 ppm methyl parathion, 0.1 ppb malachite green, and 5 ppb thiram simultaneously. [ABSTRACT FROM AUTHOR]

We demonstrate an extremely simple and practical surface enhanced Raman spectroscopy (SERS) technique for trace chemical detection. Filter membranes first trap silver nanoparticles to form a SERS-active substrate and then concentrate analytes from a mL-scale sample into a μL-scale detection volume. We demonstrate a significant improvement in detection limit as compared to colloidal SERS for the pesticide malathion and the food contaminant melamine. The measured SERS intensity exhibits low variation relative to traditional SERS techniques, and the data can be closely fit with a Langmuir isotherm. Thus, due to the simple procedure, the low-cost of the substrates, the quantitative results, and the performance improvement due to analyte concentration, our technique enables SERS to be practical for a broad range of analytical applications, including field-based detection of toxins in large-volume samples.

We have demonstrated sensitive label-free virus detection using the opto-fluidic ring resonator (OFRR) sensor. The OFRR is a novel sensing platform that integrates the microfluidics and photonic sensing technology with a low detection limit and small volume. In our experiment, filamentous bacteriophage M13 was used as a safe model system. Virus samples were flowed through the OFRR whose surface was coated with M13-specific antibodies. We studied the sensor performance by monitoring in real-time the virus and antibody interaction. It is shown that OFRR can detect M13 with high specificity and sensitivity. The detection limit is approximately 2.3 x 10(3) pfu mL(-1) and the detection dynamic range spanned seven orders of magnitude. Theoretical analysis was also carried out to confirm the experimental results. Our study will lead to development of novel OFRR-based, sensitive, rapid, and low-cost micro total analysis devices for virus detection.