Search

Apo-H is a plasma glycoprotein. Nearly 19% of the molecular weight of this protein is composed of glycans. Up- and down-regulation and structural changes in protein glycans provide diagnostic value for disease detection. Here, an efficient, sensitive, and optimized method is developed for Apo-H N-glycans analysis by MALDI-TOF-MS in positive mode. This bioanalytical method includes sample preparation, sample purification, and detection. An Apo-H enrichment method is developed using standard proteins by anti-Apo-H beads followed by enrichment from plasma samples. SDS-PAGE confirms the Apo-H protein enrichment, which is further verified by LC-MS/MS analysis. The lower ionization efficiency of sialylated glycan hampers their analysis by MALDI-MS. For this, stabilization of sialic acids is done by selective derivatization of carboxyl groups to differentiate between α(2,3)- and α(2,6)-linked sialic acids. Glycans are further purified by HILIC-SPE and analyzed by MALDI-MS. Several branched bi- and tri-antennary glycans with fucosylation and sialylation are identified. The reproducibility of the developed method is tested by analyzing multiple replicates of human plasma, where the same glycans are consistently identified. This method could be applied for the Apo-H glycan profiling of large clinical cohorts for diagnostic purposes. [ABSTRACT FROM AUTHOR]

Highly specific enrichment of N-linked glycopeptides from complex biological samples is crucial prior to mass spectrometric analysis. In this work, a hydrophilic metal–organic framework composite is prepared by the growth of UiO-66-NH2 on graphene sheets, followed by its post-synthetic modification to attach boronic acid to form GO@UiO-66-PBA. The fabrication of graphene oxide-MOF composite results in enhanced surface area with improved thermal and chemical stability. The synthesized MOF nanocomposite is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and BET. A crystalline structure with high porosity offering large surface area and good hydrophilicity of the nanocomposite assists as an enrichment tool in glycoproteomics. The GO@UiO-66-PBA nanocomposite selectively enriches N-linked glycopeptides from tryptic digests of horseradish peroxidase (HRP) and immunoglobulin (IgG). GO@UiO-66-PBA nanoparticles show a low detection limit (1 fmol) and good specificity (1:200), reusability and reproducibility for N-linked glycopeptide enrichment from IgG digest. The binding capacity of GO@UiO-66-PBA is 84 mg/g for protein concentration, with a good recovery of 86.5%. A total of 372 N-linked glycopeptides corresponding to different glycoproteins are identified from only 1 μL of human serum digest. Thus, the presented research work can be an efficient separation platform for N-linked glycopeptide enrichment from complex samples, which can be extended to cost-effective routine analysis. [ABSTRACT FROM AUTHOR]

Titania-grafted magnetic sporopollenin is synthesized by the liquid-phase deposition (LPD) technique, characterized by SEM, EDX, and nitrogen adsorption porosimetry, and used for the selective enrichment of phosphorylated peptides. The material is low cost because of easier availability of pollens and has rich surface chemistry which enables strong attachment of titania onto magnetic sporopollenin. The material shows higher selectivity of 1:1000 with β-casein spiked in BSA. Higher sensitivity of 10 fmol is recorded for phosphopeptides from standard β-casein digest. Twenty phosphorylated peptides are enriched from milk digest and four endogenous phosphopeptides from diluted human serum. The magnetic property of titania-coated magnetic sporopollenin facilitates the fast and effective isolation of phosphopeptides from complex mixtures through external magnet. The material is finally applied to tryptic digest of rat brain cell lysate for phosphopeptide enrichment where 2718 phosphopeptides are identified by using LC-MS/MS with C18 column. Titania-coated magnetic sporopollenin captures both mono-phosphorylated (2489) and multi-phosphorylated peptides (229) due to strong affinity of TiO2 with phosphates. TiO2-coated magnetic material also shows better enrichment efficiency in comparison to commercial TiO2. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) are an eminent addition to materials science research because of their versatile properties due to which their applications are wide spread in proteomics. They are used in various fields due to their characteristics like higher surface area, specific symmetry, ease of modification, and availability of a variety of ligands. As affinity sorbents, they have shown higher selectivity, sensitivity, and reproducibility than conventionally used materials. They are applied for the enrichment of phosphopeptides, glycopeptides, low mass peptides, and as laser desorption/ionization (LDI) matrices for small-molecule analysis. This review captures the insight of applying MOFs in the field of mass spectrometry-based proteomics. The specific features are discussed regarding MOFs as affinity sorbents for the selective capture of biological molecules like phosphopeptides and glycopeptides from complex samples. The potential of MOFs as LDI mass spectrometry (LDI-MS) matrices for small-molecule analysis is also evaluated. MOFs have also been used as enzymatic reactors for the digestion of proteins, prior to MS analysis. MOF-based affinity materials and bioreactors reduce proteome complexity and improve detection sensitivity and coverage. Size-exclusion effects of MOFs help in subtracting the abundant proteins in peptidomics. Several limitations of MOFs are addressed, which include stability under varying pH conditions, the unclear interaction mechanism between the MOFs and targeted analytes, and the non-specific binding that interferes during the analysis because of metal centers and ligands in the MOFs. This will open up MOF-based research to overcome the limitations and improve the performance of MOFs as selective and sensitive materials. Graphical abstract ᅟ [ABSTRACT FROM AUTHOR]

In affinity chromatography, enrichment of biomolecules is dependent on the selection of affinity sites immobilized onto a suitable support material. A few hydrazide - functionalized materials with surface modification protocols compatible to conventional support materials like silica and cellulose are reported. The study demonstrates the modification/derivatization pathways that can be adopted to modify the support materials with similar surface chemistry like cellulose, poly(GMA/DVB), or diamond. Poly(GMA/DVB) and cellulose represent hydrophilic supports whereas diamond is a hydrophobic support material. SEM images of three materials provide surface morphology whereas FT-IR confirms reaction completion and derivatization. These hydrazide - functionalized materials are applied to fetuin digest for glycopeptides enrichment and subsequently for selectivity and sensitivity assessment. Statistically, poly(GMA/DVB) shows 85.7% sensitivity with specificity of 88.8% in the enrichment experiments. Diamond offers hydrophobic interactions to non-glycopeptides and they co-elute with glycopeptides, resulting in reduced sensitivity down to 69.2%. Poly(GMA/DVB) shows recovery up to 89%, while recovery for cellulose and diamond is 83 and 71%, respectively. The materials enrich mono-N-linked-glycosylated peptide from tryptic digest of chicken avidin spiked in fetuin digest. The hydrazide group density on cellulose, poly(GMA/DVB), and diamond is 2.8, 2.3, and 2.1 mmol/g, respectively; this contributes towards the specificity and sensitivity of designed materials. The materials are also applied to serum samples and enriched glycopeptides characteristic of serum glycoproteins of clinical importance. Therefore this study provides routes for the economical surface modifications of support materials and to fabricate affinity materials with improved efficiency. [ABSTRACT FROM AUTHOR]

Development of affinity materials for the selective enrichment of phosphopeptides has attracted attention during the last decade. In this work, diamond-lanthanum oxide and diamond-samarium oxide composites have been fabricated via the hydrothermal method. The composites are characterized by scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDAX), and atomic force microscopy (AFM). The analyses confirm the size and composition of the nanocomposites. They have been applied to selectively capture phosphorylated peptides from standard proteins (β-casein and BSA). Selectivity is calculated as 1:3000 and 1:1500 while sensitivity down to 1 and 20 fmol for diamond-lanthanum oxide and diamond-samarium oxide nanocomposites, respectively. Enrichment efficiency has also been evaluated for non-fat milk digest where 18 phosphopeptides are enriched. Total of 213 and 187 phosphopeptides are captured from tryptic digest of HeLa cells extracted proteins by diamond-lanthanum oxide and diamond-samarium oxide, respectively. Finally, human serum, without any pre-treatment, is applied and nanocomposites capture the endogenous serum phosphopeptides. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

A simple and highly effective reversed-phase (RP) high-performance liquid chromatography (HPLC) method is described for analysing glutathione (GSH) and glutathione disulfide (GSSG) in out-flowing supernatants and lysates of perfusion cell cultures of human kidney cells (HK-2 cells) continuously exposed to cadmium chloride (CdCl2), which is a well-known nephrotoxin. The developed linear liquid chromatographic gradient employs monolithic poly(styrene- co-divinylbenzene) (PS/DVB) as a stationary phase and is adaptable for coupling to mass spectrometry via an electrospray ionisation interface (LC-ESI/MS), which is carried out in case of co-eluting peaks. This study presents a quantitative assay of glutathione over the time of experiment and cell lysates at the end of the experiment. The assay of out-flowing supernatants has the potential to be applied as an online assay in high time resolution. Glutathione (reduced and oxidised, GSH and GSSG) is chosen as an indicator for toxic effects in the cultured cells. In principle it is possible to show the concentration of glutathione as a function of time in an investigation of exposure of the HK-2 cell line to CdCl2. In addition to glutathione analysis, well-established assays of cell death such as enzyme release and cell viability are performed to obtain information about the number of living cells. Toxicity of 5 μM CdCl2 is manifested in all of the assays applied. Fast (<7 min) and highly reproducible (max. aberration 4.7%) determination of glutathione could be achieved. [ABSTRACT FROM AUTHOR]