Search

Nitric oxide (NO) and its by-products are important biological signals in human physiology and pathology particularly in the vascular and immune systems. Thus, in situ determination of the NO-related molecule (NOx) levels using embedded sensors is of high importance particularly in the context of cellular biocompatibility testing. However, NOx analytical reference method dedicated to the evaluation of biomaterial biocompatibility testing is lacking. Herein, we demonstrate a PAPA-NONOate-based reference method for the calibration of NOx sensors. After, the validation of this reference method and its potentialities were demonstrated for the detection of the oxidative stress-related NO secretion of vascular endothelial cells in a 3D tissue issued from 3D printing. Such NOx detection method can be an integral part of cell response to biomaterials. [ABSTRACT FROM AUTHOR]

Accurate and precise cortisol measurements are requisite for ensuring appropriate diagnosis and management of diseases related with adrenal or pituitary gland disorders. Prompted by the needs in characterization of certified reference materials and quality assurance for serum cortisol measurements, we developed and evaluated a highly reliable measurement procedure based on isotope dilution liquid chromatography-tandem mass spectrometry (ID LC-MS/MS) combined with dextran sulfate-Mg2+ precipitation as the sample pretreatment. An appropriate amount of serum was accurately weighed and spiked with the isotope labelled internal standard. After precipitation, massive lipids and lipoproteins were removed from serum matrix. The clear supernatant was transferred and extracted with ethyl acetate-hexane solution. The cortisol was analyzed with LC-MS/MS in positive electrospray ionization mode. The within-run and total coefficient of variations (CVs) ranged from 0.3 to 0.6% and 0.7 to 1.2%, respectively, for a concentration range of 76.30 to 768.04 nmol/L. A regression comparison of the results obtained by the present method and the certified values of ERM-DA451 showed agreement with no statistical difference (Y = 1.0092 X-0.7455; 95% CI for the slope, 0.9940 to 1.0212; 95% CI for the intercept, − 3.6575 to 2.6390, r2 = 0.999). All structural analogs of cortisol tested were well resolved from cortisol in 12 min on a phenyl ligand column under an isocratic elution. The limit of quantification was estimated to 5 pg cortisol in absolute amount. This method is accurate and simple and can be served as a candidate reference measurement procedure in establishment of serum cortisol reference system. [ABSTRACT FROM AUTHOR]

Measurement of serum progesterone is important in determining ovarian function. Most progesterone measurements are performed with immunoassays and results are often variable. Standardization of the measurements requires a reliable reference method. An isotope dilution liquid chromatography tandem mass spectrometry (ID-LC/MS/MS) method for the measurement of serum progesterone was developed. Serum samples were spiked with 13C3-progesterone, extracted with a three-step liquid-liquid extraction, and analyzed by LC/MS/MS. A bracketing calibration was used for the analysis and samples were prepared gravimetrically. The developed method showed intra-run and total relative standard deviations (RSDs) of 0.50~0.58% and 0.71~1.33%, respectively. The analytical recoveries were 99.08~101.50%. Measurement results on certified reference materials obtained with this method agreed with the certified values within the stated measurement uncertainties. The method was applied to evaluate immunoassays through split-sample comparisons. A panel of 48 fresh frozen individual samples were measured with the ID-LC/MS/MS method, and six immunoassays and results were compared. Significant calibration biases and sample-specific deviations were observed on some of the immunoassays. [ABSTRACT FROM AUTHOR]

A candidate reference measurement procedure (RMP) for measurement of unconjugated estriol in human serum has been developed and validated. The proposed method is highly reliable and uses isotope dilution coupled with liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) and requires no derivatization. An appropriate amount of serum was accurately weighed and spiked with an isotopically labeled internal standard. Unconjugated estriol and its internal standard were extracted from serum matrix using liquid-liquid extraction prior to reversed-phase LC-MS/MS. Calibrator bracketing was used to give higher specificity and accuracy for assigning serum level. The accuracy of the candidate RMP was validated by split-sample comparison to established RMPs. The lowest limit of detection (LLoD) and lowest limit of quantification (LLoQ) for developed RMP was estimated to be 0.14 nmol/L and 0.35 nmol/L, respectively. Both intra- and inter-assay imprecisions were ≤2.19% at 1.39, 17.34 and 69.35 nmol/L, respectively. Recoveries were 98.54% to 100.34% and linear response ranged from 0.35 to 173.38 nmol/L. No interference was observed. Biases were 5.6% and 2.8% against the targets of RELA2015A (3.87 nmol/L) and RELA2015B (40.62 nmol/L), respectively. Moreover, the candidate RMP was successfully applied to measure level of unconjugated estriol in serum samples of pregnant women (n = 3) and compared with two immunoassays in clinical laboratory. Our developed method is simple, accurate, and can be used as a candidate RMP to determine total unconjugated estriol level in human serum. Further improvement of certain immunoassays in accuracy and precision is needed.Selected ion chromatograms by LC-MS/MS using a C18 column for uE3 from a serum sample [ABSTRACT FROM AUTHOR]

The total haemoglobin (Hb) concentration in blood is one of the most frequently measured analytes in clinical medicine because of its significance for evaluating the health state of a human. The spectrophotometric cyanmethaemoglobin (HiCN) method is the internationally accepted conventional reference method to determine this biomarker. It is frequently used in clinical routine diagnostics but is not traceable to the International System of Units and thus does not meet highest metrological demands. A further critical issue is the toxicity of the necessary potassium cyanide. Different methods to solve these problems are reported here. They all were validated against the HiCN method in an interlaboratory comparison by measuring the total Hb concentration present in the certified reference material JCCRM 912-2M. Methods considered were the spectrophotometric alkaline haematin detergent (AHD) method as well as several isotope dilution (ID)-based approaches. The latter include inductively coupled plasma mass spectrometry (ICP-MS), species-specific (SS) ICP-MS, organic MS and Raman spectrometry. [ABSTRACT FROM AUTHOR]

The inaccuracy of routine serum 25-hydroxyvitamin D measurements hampers the interpretation of data in patient care and public health research. We developed and validated a candidate reference measurement procedure (RMP) for highly accurate quantitation of two clinically important 25-hydroxyvitamin D metabolites in serum, 25-hydroxyvitamin D [25(OH)D] and 25-hydroxyvitamin D [25(OH)D]. The two compounds of interest together with spiked deuterium-labeled internal standards [ d-25(OH)D and d-25(OH)D] were extracted from serum via liquid-liquid extraction. The featured isotope-dilution LC-MS/MS method used reversed-phase chromatography and atmospheric pressure chemical ionization in positive ion mode. A pentafluorophenylpropyl-packed UHPLC column together with isocratic elution allowed for complete baseline resolution of 25(OH)D and 25(OH)D from their structural C-3 isomers within 12 min. We evaluated method trueness, precision, potential interferences, matrix effects, limits of quantitation, and measurement uncertainty. Calibration materials were, or were traceable to, NIST Standard Reference Materials 2972. Within-day and total imprecision (CV) averaged 1.9 and 2.0 % for 25(OH)D, respectively, and 2.4 and 3.5 % for 25(OH)D, respectively. Mean trueness was 100.3 % for 25(OH)D and 25(OH)D. The limits of quantitation/limits of detection were 4.61/1.38 nmol/L for 25(OH)D and 1.46/0.13 nmol/L for 25(OH)D. When we compared our RMP results to an established RMP using 40 serum samples, we found a nonsignificant mean bias of 0.2 % for total 25(OH)D. This candidate RMP for 25(OH)D metabolites meets predefined method performance specifications (≤5 % total CV and ≤1.7 % bias) and provides sufficient sample throughput to meet the needs of the Centers for Disease Control and Prevention Vitamin D Standardization Certification Program. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

We propose isotope-dilution mass spectrometry as a candidate reference method for determination of serum cortisol. The method uses liquid chromatography-mass spectrometry (LC-MS), interfaced with electrospray ionization, and selective monitoring of the [M+H]+ ions of cortisol and isotopically labeled cortisol. The isotope-dilution-liquid chromatography-mass spectrometry (ID-LC-MS) method simplifies sample-preparation, because samples are processed by simple solvent extraction without further clean-up and derivatization. We studied the time required for complete equilibration of endogenous cortisol and labeled cortisol spiked into serum and found it to be less than 1 h. The repeatability and the reproducibility of the method were evaluated and found to be 0.55% of the measurement value. CRM 192 and 193 from the Bureau Communautaire de Reference were analyzed for verification of the method. The results obtained from the ID-LC-MS method agreed with the certified values. The relative uncertainty of measurement results for samples in the range of a few tens of micrograms per kilogram to several hundred micrograms per kilogram was evaluated and found to be 0.56%. Immunoassay carried out by three independent clinical laboratories produced results more than 15% higher than this ID-LC-MS method, suggesting the presence of bias in the immunoassay methods. [ABSTRACT FROM AUTHOR]